Answer: This is because of the different chemical composition of the types of detergents affects their cleansing actions.
Explanation:
Detergent means any substance which has the ability to clean an object. This includes soaps, soap powers and dish washing liquids as well as water. Detergents fall into two main types
--> Soapy detergents and
--> Soapless detergents
Soapy detergents are sodium salts of fatty acids. They are saponification products of fats and oils. In the chemical composition, each molecule of soap possesses a long hydrocarbon chain attached to an ionic head. The hydrocarbon tail is hydrophobic, so it is insoluble in water but soluble in oil and organic solvents. The ionic head is hydrophilic, so it is soluble in water. Due to this dual nature, when is dissolved in water, the soap molecule forms spherical clusters called MICELLES( hydrocarbon tails points inward and ionic heads point outward). Repulsion between the similarly charged ionic heads keeps the micelles apart. This property helps the soapy detergent to lift grease from grease coated fabrics when applied to it.
While the chemical properties of the Soapless detergents has a hydrophobic tail and a hydrophilic head. The hydrophobic tail is either a long chain hydrocarbon or a benzene ring with a long alkyl group attached. The hydrophilic head, unlike the Soapy detergents, can be positively or negatively charged or even neutral. These chemical properties makes it to have a more favourable and wider application than soapy detergent.it is suitable for washing acid - sensitive fabrics and for breaking up oil slicks.
Which of the following statements is true? a. Rate constants can have negative values. b. The order of a reactant appearing in the rate law must always be a positive integer. c. The order of each reactant appearing in the rate law is equal to the stoichiometric coefficient for that reactant in the overall balanced equation. d. Reaction rates can have negative values. e. The rate of disappearance of a reactant is generally not constant over time.
The order of each reactant appearing in the rate law is equal to the stoichiometric coefficient for that reactant in the overall balanced equation is the correct answer.
The rate law is an equation that describes the rate of a chemical reaction in terms of the concentration or pressure of the reactants. It is also known as the rate equation or rate expression. The order of a reactant appearing in the rate law is an experimentally determined quantity that is not related to the stoichiometric coefficients of the balanced equation. It can be a positive, negative, or zero value, depending on how the rate is affected by changes in the concentration of the reactant. The order of each reactant appearing in the rate law is equal to the stoichiometric coefficient for that reactant in the overall balanced equation. This is not always true, as the rate law can involve other factors besides the concentrations of the reactants.
However, it is often the case that the rate of a reaction is proportional to the concentrations of the reactants raised to the power of their stoichiometric coefficients. There is no such thing as a negative rate constant or negative reaction rate. These values are always positive or zero. A negative rate of change of concentration may occur during a reaction if the concentration of a reactant is decreasing, but this is not the same as a negative reaction rate. The rate of disappearance of a reactant is generally not constant over time, as the concentration of the reactant changes during the reaction. The rate law can be used to determine the rate of disappearance of a reactant at any given time, but this value will change as the reaction progresses.
know more about stoichiometric coefficient,
https://brainly.com/question/32563206
#SPJ11
Would the pH at the equivalence point be acidic, basic, or neutral for each given titration?
CH3COOH with Sr(OH)2
Choose...BasicAcidicNeutral
HCl with NH3
Choose...BasicAcidicNeutral
HClO4 with Ba(OH)2
Choose...BasicAcidicNeutral
The pH at the equivalence point of the titration between CH₃COOH and Sr(OH)₂ is basic, the pH at the equivalence point of the titration between HCl and NH₃ is acidic, and the pH at the equivalence point of the titration between HClO₄ and Ba(OH)₂ is neutral.
For the titration of CH₃COOH with Sr(OH)₂:
The reaction between CH₃COOH (acetic acid) and Sr(OH)₂ (strontium hydroxide) produces a salt, Sr(CH₃COO)₂, and water. The salt Sr(CH₃COO)₂ is a weak base.
At the equivalence point, all of the acetic acids reacted with strontium hydroxide, resulting in the formation of the salt. The salt Sr(CH₃COO)₂ will hydrolyze in water, producing hydroxide ions (OH⁻).
Therefore, at the equivalence point, the pH will be basic.
For the titration of HCl with NH₃:
The reaction between HCl (hydrochloric acid) and NH₃ (ammonia) produces ammonium chloride (NH₄Cl).
At the equivalence point, all of the hydrochloric acids have reacted with ammonia, resulting in the formation of ammonium chloride. Ammonium chloride is a salt.
The salt NH₄Cl will dissociate in water to produce ammonium ions (NH₄⁺) and chloride ions (Cl⁻). The presence of the ammonium ions will make the solution acidic.
Therefore, at the equivalence point, the pH will be acidic.
For the titration of HClO₄ with Ba(OH)₂:
The reaction between HClO₄ (perchloric acid) and Ba(OH)₂ (barium hydroxide) produces barium perchlorate (Ba(ClO₄)₂) and water.
At the equivalence point, all of the perchloric acids reacted with barium hydroxide, resulting in the formation of barium perchlorate. Barium perchlorate is a salt.
The salt Ba(ClO₄)₂ will dissociate in water to produce barium ions (Ba²⁺) and perchlorate ions (ClO₄⁻). The presence of the barium ions will not significantly affect the pH of the solution.
Therefore, at the equivalence point, the pH will be neutral.
Learn more about the acid-base solutions here:
https://brainly.com/question/13258907
#SPJ4
Calculate the pH of each of the following solutions. Keep 2 decimal places. Kb of NO2 = 2.5e-11 Kb of OCl = 2.9e-7 Ka of NH4+ = 5.6e-10 (a) 0.13 M KNO2 (b) 0.37 M NaOC (c) 0.48 M NHACIO 4
The pH of the solutions are approximately: (a) 3.40, (b) 7.46, (c) 0.32.
To calculate the pH of each solution, we need to determine the concentration of hydroxide ions (OH-) in the solution and then convert it to pH using the relationship: pH = -log10[OH-].
(a) 0.13 M KNO2:
KNO2 dissociates in water to form NO2- ions. Since we are given the Kb value for NO2, we can calculate the concentration of OH- ions using the Kb expression: Kb = [OH-][NO2-]/[NO2]. Given that the concentration of NO2- is equal to the concentration of KNO2 (0.13 M), we can set up the equation as follows:
2.5e-11 = [OH-][0.13]/[0.13]
[OH-] = 2.5e-11 M
pOH = -log10[OH-] ≈ 10.60
pH = 14 - pOH ≈ 3.40
(b) 0.37 M NaOCl:
NaOCl dissociates in water to form OCl- ions. We can use the Kb expression for OCl to calculate the concentration of OH- ions:
2.9e-7 = [OH-][OCl-]/[OCl]
[OH-] = 2.9e-7 M
pOH = -log10[OH-] ≈ 6.54
pH = 14 - pOH ≈ 7.46
(c) 0.48 M NHACIO4:
NHACIO4 is a strong acid, meaning it dissociates completely in water, releasing H+ ions. Therefore, the concentration of H+ ions in the solution is equal to the concentration of NHACIO4 (0.48 M).
pH = -log10[H+] = -log10[0.48] ≈ 0.32
In summary, the pH of the solutions are approximately: (a) 3.40, (b) 7.46, (c) 0.32.
Learn more about pH here:
https://brainly.com/question/2288405
#SPJ11
For the reaction of hypochlorite anion with iodide anion, the iodide anion acts as the reducing agent according to the following oxidation half-reaction: 21- (aq) + I2 (aq) + 2e Which of the following reduction half-reactions is correct to give the overall reaction of hypochlorite anion with iodide anion? (A) CIO (aq) + 2e + C (aq) + H2O (1) (B) H+ (aq) + C10 (aq) + e → C (aq) + H2O (1) (C) 2H+ (aq) + C10 (aq) + 2e + Cl(aq) + H20 (1)
The reduction half-reaction that is correct to give the overall reaction of hypochlorite anion with iodide anion is; 2H⁺ (aq) + ClO⁻ (aq) + 2e⁻ → Cl⁻ (aq) + H₂O (l). Option C is correct.
To determine the correct reduction half-reaction that gives the overall reaction of hypochlorite anion (ClO⁻) with iodide anion (I⁻), we need to consider the conservation of charge and atoms.
The oxidation half-reaction given is;
I⁻ (aq) + I₂ (aq) + 2e⁻ → 2I⁻ (aq)
In this reaction, iodide ion (I⁻) is oxidized to form iodine (I₂) by losing two electrons.
To balance this with a reduction half-reaction, we need to find a reaction that involves the reduction of hypochlorite anion (ClO⁻) while simultaneously consuming the electrons produced in the oxidation half-reaction.
Therefore, the correct reduction half-reaction will be:
2H⁺ (aq) + ClO⁻ (aq) + 2e⁻ → Cl⁻ (aq) + H₂O (l)
In this reaction, hypochlorite anion (ClO⁻) is reduced to chloride ion (Cl⁻) by gaining two electrons, which balances the oxidation half-reaction. The addition of two hydrogen ions (2H⁺) and the formation of water (H₂O) completes the balanced reduction half-reaction.
Hence, C. is the correct option.
To know more about reduction half-reaction here
https://brainly.com/question/12686471
#SPJ4
Consider the following balanced equation:
6HCl(aq) + 2Al(s) → 3H2(g) + 2AlCl3(s)
If 17.3 moles of HCl(aq) and 7.07 moles of Al(s) are allowed to react, and the percent yield is 71.8%, how many moles of AlCl3(s) will actually be produced?
The actual yield of AlCl₃ produced will be 10.16 moles.
To determine the number of moles of AlCl₃ produced, we need to first calculate the theoretical yield based on the balanced equation and then apply the percent yield to find the actual yield.
From the balanced equation:
6HCl(aq) + 2Al(s) → 3H₂(g) + 2AlCl₃(s)
We can see that the stoichiometric ratio between Al and AlCl₃ is 2:2 (2 moles of Al react to produce 2 moles of AlCl₃).
Given:
Moles of HCl(aq) = 17.3 moles
Moles of Al(s) = 7.07 moles
Percent yield = 71.8% = 0.718 (decimal)
To find the limiting reactant, we need to compare the moles of HCl and Al based on their stoichiometric coefficients.
Moles of Al required = (2 moles of AlCl₃ / 2 moles of Al) × Moles of Al(s)
= 1 × 7.07 = 7.07 moles
Since 7.07 moles of Al is less than 17.3 moles of HCl, Al is the limiting reactant.
Now, we can calculate the theoretical yield of AlCl₃ based on the limiting reactant (Al).
Theoretical yield of AlCl₃ = (Moles of AlCl₃ produced per mole of Al) × Moles of Al
= 2 × 7.07 = 14.14 moles
To find the actual yield, we multiply the theoretical yield by the percent yield:
Actual yield = Percent yield × Theoretical yield
= 0.718 × 14.14
= 10.16 moles
Therefore, the actual yield of AlCl₃ produced will be 10.16 moles.
To know more about actual yield
https://brainly.com/question/1306952
#SPJ4
the electron in a ground-state h atom absorbs a photon of wavelength 94.98 nm. to what energy level does the electron move?
The electron moves to the energy level [tex]n_{final}[/tex] = 1.093. Please note that energy levels in hydrogen are typically represented by integers, so we can round the value to the nearest whole number. Therefore, the electron moves to the energy level n = 1
To determine the energy level to which the electron moves, we can use the equation:
ΔE = hc/λ
Where ΔE is the change in energy, h is Planck's constant (approximately 6.626 x 10⁻³⁴ J·s), c is the speed of light (approximately 3.00 x 10⁸ m/s), and λ is the wavelength of the absorbed photon.
Let's convert the wavelength from nanometers to meters:
λ = 94.98 nm = 94.98 x 10⁻⁹ m
Now we can calculate the change in energy:
ΔE = (6.626 x 10⁻³⁴ J·s)(3.00 x 10⁸ m/s)/(94.98 x 10⁻⁹ m)
ΔE ≈ 2.206 x 10⁻¹⁸ J
The change in energy corresponds to the transition between energy levels in the hydrogen atom. The energy levels in the hydrogen atom are described by the formula:
ΔE = -13.6 eV ₓ (1/n_final²- 1/n_initial²)
Solving for [tex]n_{final}[/tex], we can find the energy level to which the electron moves:
[tex]n_{final}[/tex]= √(1/(1 - ΔE/(13.6 eV)))
Using the calculated value of ΔE, we find:
[tex]n_{final}[/tex] =√(1/(1 - 2.206 x 10^-18 J/(13.6 x 1.602 x 10^-19 J/eV)))
[tex]n_{final}[/tex] = √(1/(1 - 0.1625))
[tex]n_{final}[/tex] =√(1/0.8375)
[tex]n_{final}[/tex] =√(1.192)
[tex]n_{final}[/tex] = 1.093
The electron moves to the energy level [tex]n_{final}[/tex] = 1.093.
To know more about electron
https://brainly.com/question/371590
#SPJ11
Draw the Lewis structure of BrCl₄⁻ and then determine its electron domain and molecular geometries.
The Lewis structure of BrCl₄⁻, or tetrachlorobromate ion, consists of a central bromine atom (Br) bonded to four chlorine atoms (Cl) and one additional negative charge (-). The structure is as follows:
Br
|
Cl-Cl
|
Cl
The electron domain geometry of BrCl₄⁻ is tetrahedral. This is because there are four bonding pairs and one lone pair of electrons around the central bromine atom. The presence of the lone pair influences the overall shape.
The molecular geometry of BrCl₄⁻ is also tetrahedral. The four chlorine atoms and the lone pair of electrons around the bromine atom repel each other, leading to a symmetric arrangement in three-dimensional space.
In summary, the Lewis structure of BrCl₄⁻ shows a central bromine atom bonded to four chlorine atoms and one additional negative charge. The electron domain geometry is tetrahedral due to the presence of four bonding pairs and one lone pair of electrons. The molecular geometry is also tetrahedral, resulting from the repulsion between the chlorine atoms and the lone pair around the central bromine atom.
Learn more about molecular geometry, below:
https://brainly.com/question/31993718
#SPJ11
Classify each of the following as a Lewis acid or a Lewis base.
Drag the appropriate items to their respective bins.
LEWIS ACID OR LEWIS BASE'
1) CO2
2)P(CH3)3
3)H2O
4)B(CH3)3
5)FE3+
6)CN-
7)OH-
8)H+
Lewis acids are CO₂, B(CH₃)₃, Fe₃⁺, and H⁺, Lewis bases are P(CH₃)₃, H₂O, CN⁻, and OH⁻.
Lewis acids are species that can accept a pair of electrons, while Lewis bases are species that can donate a pair of electrons.
1) CO₂: Lewis acid - It can accept a pair of electrons from a Lewis base.
2) B(CH₃)₃: Lewis acid - It can accept a pair of electrons from a Lewis base.
3) Fe₃⁺: Lewis acid - It can accept a pair of electrons from a Lewis base.
4) H⁺: Lewis acid - It can accept a pair of electrons from a Lewis base.
5) P(CH₃)₃: Lewis base - It can donate a pair of electrons to a Lewis acid.
6) H₂O: Lewis base - It can donate a pair of electrons to a Lewis acid.
7) CN⁻: Lewis base - It can donate a pair of electrons to a Lewis acid.
8) OH⁻: Lewis base - It can donate a pair of electrons to a Lewis acid.
To know more about Lewis acids here
https://brainly.com/question/15103003
#SPJ4
perform a retrosynthetic analysis of the alcohol. the alcohol is secondary , so it is formed by reaction of the grignard reagent with a ketone.
Answer : The retrosynthetic analysis of the secondary alcohol formed by the reaction of the Grignard reagent with a ketone can be broken down into the following steps: Deprotonation of the alcohol, addition of Grignard reagent, and formation of a ketone.
Explanation : Retrosynthetic analysis is a technique that is used to design organic synthesis starting from the target molecule by working backward to the starting material or by breaking it down into simpler precursors. Here's the retrosynthetic analysis of the given alcohol which is secondary and formed by reaction of the Grignard reagent with a ketone.
The retrosynthetic analysis of a secondary alcohol formed by the reaction of the Grignard reagent with a ketone can be broken down into the following steps:
Step 1: Deprotonation of the alcohol
This step involves the removal of the proton attached to the oxygen atom of the alcohol.
Step 2: Addition of Grignard reagent
Once the proton is removed, the alcohol would be transformed into an alkoxide ion which will react with the Grignard reagent. The Grignard reagent is added to the alkoxide ion to form a tertiary alcohol.
Step 3: Formation of a ketone
The tertiary alcohol that was formed in step 2 can be broken down into a ketone.
Learn more about retrosynthetic analysis here https://brainly.in/question/55968303
#SPJ11
The molar solubility of __________ is not affected by the pH of thesolution.
a. Na3PO4
b. AlCl3
c. NaF
d. MnS
e. KNO3
The molar solubility of KNO₃ is not affected by the pH of the solution.
e. KNO₃
Why molar solubility of potassium nitrate (KNO₃) is not affectedKNO₃ is a salt composed of potassium ions and nitrate ions . It is a highly soluble compound in water, and its solubility is not influenced by changes in the pH of the solution.
In contrast, the molar solubility of other compounds listed such as sodium phosphate, aluminum chloride, NaF (sodium fluoride), and MnS (manganese sulfide) can be affected by the pH of the solution.
The solubility of some salts can be influenced by the pH because changes in pH can alter the equilibrium between the dissolved ions and the solid salt.
Learn more about pH of the solution at
https://brainly.com/question/172153
#SPJ4
A sample of which radioisotope emits particles having the greatest mass?
a) Cs-137
b) Fe-53
c) Fr-220
d) H-3
Radioactive decay is a process in which an unstable atomic nucleus emits a specific type of radiation to gain stability. These emitted particles are either in the form of alpha or beta particles and sometimes gamma rays. Radioactive decay rate depends on the stability of the nucleus. (d) H-3 is a radioisotope that emits particles having the greatest mass.
A radioisotope is a type of atom that has an unstable nucleus and can spontaneously emit energetic particles or radiation to gain stability. Radioisotopes are also known as radioactive isotopes or isotopes.
Radioisotopes are used in a variety of applications, including scientific research, medical diagnosis, and treatment, industrial manufacturing, and energy production. Medical isotopes are used to diagnose and treat various illnesses. They are used to make sure machines, such as oil rigs and pipelines, are functioning correctly. They can be used in manufacturing for thickness measurements or to detect flaws in metal parts. They are used in scientific research to label molecules to study biological processes.
Radioactive decay is the process by which the nucleus of an unstable atom loses energy by emitting ionizing particles. This process of decay transforms the nucleus into a more stable configuration. The significance of radioactive decay is that it enables scientists to determine the age of a particular material or substance by analyzing the amount of decay products present.
An alpha particle is a positively charged particle consisting of two protons and two neutrons, which is emitted by certain radioactive materials. Alpha particles are relatively heavy and have a short range, meaning that they can only travel a short distance in air before being absorbed by other material. Alpha particles are dangerous if ingested or inhaled.
A beta particle is a high-energy electron emitted by a nucleus undergoing radioactive decay. Beta particles have less mass than alpha particles and travel faster and farther, but they are also less ionizing and can be stopped by a few millimeters of material.
A gamma ray is a high-energy photon emitted by a nucleus undergoing radioactive decay. Gamma rays are very penetrating and can travel through several meters of concrete or lead. Gamma rays are used in medical imaging and radiation therapy. They are also used to sterilize medical equipment and food products.
To know more about Radioactive decay visit:
https://brainly.com/question/1770619
#SPJ11
calculate the volume of a kilogram of magnesium (density = 1.74 g/cm3).
To calculate the volume of a kilogram of magnesium, we need to convert the density from grams per cubic centimeter (g/cm³) to kilograms per cubic meter (kg/m³) since the mass is given in kilograms.
Given:
Density of magnesium = 1.74 g/cm³
To convert the density from g/cm³ to kg/m³, we divide the density by 1000 since there are 1000 grams in a kilogram and 1,000,000 cubic centimeters in a cubic meter.
Density of magnesium = 1.74 g/cm³ = 1.74 kg/m³
Next, we can use the formula:
Density = Mass / Volume
Rearranging the formula to solve for volume:
Volume = Mass / Density
Mass of magnesium = 1 kilogram
Substituting the values into the formula:
Volume = 1 kg / 1.74 kg/m³
Simplifying, we find:
Volume = 0.574 m³
Therefore, the volume of 1 kilogram of magnesium is 0.574 cubic meters.
Learn more about volume here : brainly.com/question/13338592
#SPJ11
a solution with a ph of 4 has 100 times more h ions than a solution with a ph of 2. has 100 times fewer h ions than a solution with a ph of 2. has 100 times fewer h ions than a solution with a ph of 6. is basic.
The correct statement regarding a solution with a pH of 4 is: (A) It has 100 times fewer H⁺ ions than a solution with a pH of 2.
The pH scale is a logarithmic scale that measures the concentration of hydrogen ions (H⁺) in a solution. As the pH decreases, the concentration of H⁺ ions increases. Each unit change in pH represents a tenfold difference in H⁺ ion concentration. Therefore, a solution with a pH of 4 has 100 times fewer H⁺ ions compared to a solution with a pH of 2.
Option B is incorrect because a solution with a pH of 4 has fewer H+ ions than a solution with a pH of 6, not 100 times fewer.
Option C is incorrect because a solution with a pH of 4 has fewer H+ ions than a solution with a pH of 2, not 100 times more.
Option D is incorrect because a solution with a pH of 4 is considered acidic, not basic. Basic solutions have pH values greater than 7.
To know more about the logarithmic scale refer here :
https://brainly.com/question/32018706#
#SPJ11
Complete question :
A solution with a pH of 4 a A. has 100 times fewer H ions than a solution with a pH of 2 а OB. has100 times fewer H+ ions than a solution with a pH of 6 C. has 100 times more H+ ions than a solution with a pH of 2 is basic a OD.
complete and balance the following equation in acidic solution using the method of half-reactions. cu(s) no3−(aq)−→− cu2 (aq) no2(g)
The balanced equation in an acidic solution is:
Cu(s) + 2NO³⁻ (aq) + 4H⁺ (aq) → Cu²⁺ (aq) + 2NO₂ (g) + 2H₂O (l)
To balance the given equation in an acidic solution using the method of half-reactions, we'll split it into two half-reactions: one for oxidation and one for reduction.
Oxidation Half-Reaction:
Cu(s) → Cu²⁺ (aq)
In this half-reaction, copper (Cu) is oxidized from its elemental state (0 oxidation state) to Cu²⁺ ions.
Reduction Half-Reaction:
NO³⁻ (aq) → NO₂ (g)
In this half-reaction, nitrate ions (NO³⁻) are reduced to nitrogen dioxide gas (NO₂).
Next, we balance each half-reaction separately:
Oxidation Half-Reaction:
Cu(s) → Cu²⁺ (aq)
To balance the charge, we need to add two electrons (2e⁻) to the left side:
Cu(s) → Cu²⁺ (aq) + 2e⁻
Reduction Half-Reaction:
2NO³⁻ (aq) + 4H⁺ (aq) + 2e⁻ → 2NO₂ (g) + 2H₂O (l)
To balance the atoms, we add four hydrogen ions (4H⁺) and two electrons (2e⁻) to the left side. This balances the oxygen and hydrogen atoms. On the right side, we have nitrogen dioxide gas (NO₂) and water (H₂O).
Now, we need to multiply the half-reactions by appropriate coefficients so that the number of electrons in both reactions is equal. In this case, we need to multiply the oxidation half-reaction by 2:
2Cu(s) → 2Cu²⁺ (aq) + 4e⁻
4NO³⁻ (aq) + 8H⁺ (aq) + 4e⁻ → 4NO₂ (g) + 4H₂O (l)
Now we can add the two balanced half-reactions together:
2Cu(s) + 4NO³⁻ (aq) + 8H⁺ (aq) → 2Cu²⁺ (aq) + 4NO₂ (g) + 4H₂O (l)
Finally, we can simplify the equation by canceling out common species:
Cu(s) + 2NO³⁻ (aq) + 4H⁺ (aq) → Cu²⁺ (aq) + 2NO₂ (g) + 2H₂O (l)
Learn more about balanced chemical equation visit:
brainly.com/question/28294176
#SPJ4
Consider a diffraction grating through which monochromatic light (of unknown wavelength) has a first-order maximum at 17.5°. At what angle, in degrees, does the diffraction grating produce a second-order maximum for the same light? Numeric : A numeric value is expected and not an expression. θ2 = __________________________________________
The diffraction grating produces a second-order maximum at an angle of 35.0°.
The formula to find the angle for the mth order maximum for diffraction grating is given as;\[\sin θ_m = \frac{m \lambda}{d}\]Where;m = order of maximumd = distance between slits or grooves in the diffraction gratingλ = wavelength of the incident lightθ = angle of the diffracted lightIn the first order maximum, the angle of diffraction θ1 = 17.5°Let's plug the given values in the formula of diffraction grating for the first order maximum;\[\sin θ_1 = \frac{\lambda}{d}\]At first order maximum, m = 1Putting the given value of θ1;$$\sin 17.5^{\circ} = \frac{\lambda}{d}$$Rearranging the above equation for the distance between the grooves, d;$$d = \frac{\lambda}{\sin 17.5^{\circ}}$$We are asked to find the angle of diffraction for the second order maximum which is given by the formula of diffraction grating as;$$\sin θ_2 = \frac{2\lambda}{d}$$Now let's plug in the value of d in the above equation;$$\sin θ_2 = \frac{2\lambda}{\frac{\lambda}{\sin 17.5^{\circ}}}$$$$\sin θ_2 = 2\sin 17.5^{\circ}$$$$\theta_2 = \sin^{-1} 2\sin 17.5^{\circ}$$$$\theta_2 = \boxed{35.0^{\circ}}$$Therefore, the diffraction grating produces a second-order maximum at an angle of 35.0°.
Learn more about diffraction here:
https://brainly.com/question/12290582
#SPJ11
Which of the following is used as a catalyst in the dehydration procedure of this module? Select one: O Sulfuric acid O Hydrochloric O acid Sodium hydroxide O Nickel
The catalyst that is used in the dehydration procedure of this module is sulfuric acid.
In organic chemistry, a dehydration reaction refers to the conversion of an alcohol to an alkene. It is a process in which water is eliminated from a compound. As a result, it is classified as a type of elimination reaction.
A catalyst is often required for the reaction to proceed at a reasonable rate.
Catalysts are materials that speed up a chemical reaction without being used up in the process. In the dehydration reaction of alcohols to alkenes, sulfuric acid is often employed as a catalyst. The sulfuric acid aids in the separation of water from the alcohol, which produces a protonated alcohol as an intermediate.
As a result, the acid is both a dehydrating agent and a catalyst.
Learn more about catalyst here:
https://brainly.com/question/24430084
#SPJ11
Construct the resonance structure for CSO, which has a formal charge of +2 on the central atom (S) and 0 on the oxygern atom.. What is the formal charge for the carbon atom? (please include the postive or negative sign with the formal charge, and put the sign in front of the number)
The formal charge that is on the carbon atom from the image that we have is -1.
What is the resonance structure?Resonance structures can be used to visualize how electrons delocalize in certain molecules or ions. They are used to describe molecules or ions that have numerous legitimate electron configurations and hence cannot be adequately represented by a single Lewis structure.
In a resonance structure, different double bonds and lone electron pairs can be positioned while keeping the overall connectivity of the atoms the same. The overall description of the molecule or ion is provided by these several resonance structures, with the real structure being an average or hybrid of the various resonance contributors.
Learn more about resonance structure:https://brainly.com/question/25022370
#SPJ4
A solute with a retention time of 325 seconds has a base width of 15 seconds. The column is 11, 500 cm long. The column has how many theoretical plates? (a) 7, 512 (b) 625 (c) 15.3
The number of theoretical plates is 7,512, option (a) is the correct answer.
The formula for the number of theoretical plates (N) in a chromatography column is given as N = 16 (tR / w)².
Where: tR is the retention time is the base width of the solute. The formula indicates that the number of theoretical plates is directly proportional to the square of the retention time and inversely proportional to the square of the base width of the solute. The length of the column is not included in the formula. Using the values given in the question: N = 16 (325 / 15)² = 7,512.
Therefore, the number of theoretical plates is 7,512, option (a).
know more about theoretical plates,
https://brainly.com/question/28939318
#SPJ11
Label the bond in the following compound as ionic or covalent.
CII
a. Covalent
b. Ionic
HBr
a. Covalent
b. Ionic
The answer is "Covalent."
The bond in CII is covalent. A covalent bond occurs when two nonmetals share electrons with each other to fill their valence shells. In this case, the two nonmetals, carbon and iodine, share two electrons to form a covalent bond. The name of this compound is diiodomethane. Therefore, the answer is "a. Covalent."The bond in HBr is also covalent. Hydrogen is a nonmetal, while bromine is a halogen (also a nonmetal), which means that they share electrons to form a covalent bond. The name of this compound is hydrogen bromide. Therefore, the answer is "a. Covalent."
Learn more about Covalent here:
https://brainly.com/question/19382448
#SPJ11
14-39. Evaluate E' for the half-reaction 1 (CN)2(3)+2H+ + 2e = 2HCN(aq) Cyanogen Hydrogen cyanide 1 14-40. Calculate E' for the reaction H2C2O4 + 2H+ +2e = 2HCO2H E° = 0.204 V Oxalic acid Formic acid
The equation for the half-reaction is:
Cyanogen + Hydrogen ion + 2 electrons → Hydrogen cyanide
The balanced chemical equation for the given redox reaction is given by:CN2(3-) + 2H+ + 2e- → 2HCNFrom the given balanced equation:
Reactant: CN2(3-) and Product: HCN
In the balanced equation, number of electrons transferred = 2.The standard electrode potential, E° for this half-reaction is equal to 0.59 V.
Therefore, the E' for the given half-reaction can be calculated by using the following formula
:E'= E°-(0.0592/2) logQ
Where,
Q = [H+]^2[Cyanogen]/[Hydrogen cyanide] [H+] = 1.0M, [Cyanogen] = 1.0M, and [Hydrogen cyanide] = 1.0MTherefore,Q = (1.0)²(1.0)/(1.0)² = 1.0
Substituting the values of Q and E° in the above equation we get,
E' = 0.59-(0.0592/2) log1.0 = 0.59 - 0 = 0.59 Volts.
The equation for the given redox reaction is given by:
H2C2O4 + 2H+ + 2e- → 2HCO2H
The balanced chemical equation for the given redox reaction is given by:
Reactant: H2C2O4 and Product: HCO2H
In the balanced equation, number of electrons transferred = 2.The standard electrode potential, E° for this half-reaction is equal to 0.204 V.
Therefore, the E' for the given half-reaction can be calculated by using the following formula:
E' = E° - (0.0592/2) logQ
Where,
Q = [H+]²[Oxalic acid]/[Formic acid] [H+] = 1.0M, [Oxalic acid] = 1.0M, and [Formic acid] = 1.0MTherefore,Q = (1.0)²(1.0)/(1.0)² = 1.0
Substituting the values of Q and E° in the above equation we get,
E' = 0.204-(0.0592/2) log1.0 = 0.204 - 0 = 0.204 Volts.
Learn more about half-reaction here:
https://brainly.com/question/18403544
#SPJ11
write the full ground‑state electron configuration for that element.
a. S: b. Kr :
c. Cs :
The ground‑state electron configuration of element sulfur (S) is; 1s² 2s² 2p⁶ 3s² 3p⁴, element krypton (Kr) is; 1s² 2s² 2p⁶ 3s² 3p⁶ 4s² 3d¹⁰ 4p⁶ 5s² 4d¹⁰ 5p⁶, and the element cesium (Ce) is; 1s² 2s² 2p⁶ 3s² 3p⁶ 4s² 3d¹⁰ 4p⁶ 5s² 4d¹⁰ 5p⁶ 6s¹.
The element S represents sulfur, which has an atomic number of 16. The full ground-state electron configuration for sulfur is obtained by filling up the orbitals with electrons according to the Aufbau principle and the Pauli exclusion principle.
Starting with the lowest energy level, the 1s orbital can hold a maximum of 2 electrons. Moving to the next energy level, the 2s orbital is filled with 2 electrons as well. Then, the 2p orbital is filled with a total of 6 electrons, distributed among its three sub-orbitals (2px, 2py, 2pz).
Putting it all together, the full ground-state electron configuration for sulfur is 1s² 2s² 2p⁶ 3s² 3p⁴.
The element Kr represents krypton, which has an atomic number of 36. Similarly, we follow the Aufbau principle and the Pauli exclusion principle to determine the electron configuration.
Starting with the 1s orbital, it is filled with 2 electrons. Then, the 2s orbital is filled with 2 electrons as well. After that, the 2p orbital is filled with 6 electrons. Moving on to the 3s and 3p orbitals, they are also filled with a total of 10 electrons.
The electron configuration continues with the 4s², 3d¹⁰, 4p⁶, 5s², 4d¹⁰, and finally, the 5p⁶ orbitals.
The full ground-state electron configuration for krypton is 1s² 2s² 2p⁶ 3s² 3p⁶ 4s² 3d¹⁰ 4p⁶ 5s² 4d¹⁰ 5p⁶.
The element symbol Cs, can be explained by the filling of electrons in the various atomic orbitals according to the Aufbau principle and the Pauli exclusion principle.
The electron configuration begins with the 1s orbital, which can hold a maximum of 2 electrons. In cesium, it is filled with 2 electrons.
Next, we move to the 2s orbital, which is also filled with 2 electrons. Then, the 2p orbital is filled with 6 electrons, distributed among its three sub-orbitals (2px, 2py, 2pz).
Moving on to the third energy level, the 3s orbital is filled with 2 electrons, followed by the 3p orbital, which is filled with 6 electrons. Continuing to the fourth energy level, the 4s orbital is filled with 2 electrons, and then the 3d orbital is filled with 10 electrons.
In the fifth energy level, the 4p orbital is filled with 6 electrons. Next, the 5s orbital is filled with 2 electrons, and then the 4d orbital is filled with 10 electrons. Finally, in the sixth energy level, the 5p orbital is filled with 6 electrons, and the last electron goes into the 6s orbital.
Therefore, the full ground-state electron configuration for cesium is 1s² 2s² 2p⁶ 3s² 3p⁶ 4s² 3d¹⁰ 4p⁶ 5s² 4d¹⁰ 5p⁶ 6s¹.
To know more about electron configuration here
https://brainly.com/question/29184975
#SPJ4
why does the temperature of the reaction mixture drop (as opposed to remaining constant) once the reaction reaches the stoichiometric point? ng 5
The temperature of the reaction mixture drops once the reaction reaches the stoichiometric point due to the release of excess heat energy generated during the reaction.
During a chemical reaction, heat energy can be either released or absorbed. In an exothermic reaction, heat is released as a product, while in an endothermic reaction, heat is absorbed from the surroundings. When a reaction is not at its stoichiometric point, there is an excess of one or more reactants present. As the reaction progresses towards the stoichiometric point, the reactants are consumed, and the reactant concentration decreases.
At the stoichiometric point, the reactants are in the ideal ratio according to the balanced chemical equation. Any additional reactant beyond this point becomes excess and is no longer needed for the reaction. The excess reactant molecules do not participate in the reaction but continue to collide with each other, leading to intermolecular interactions and the release of excess heat energy. This excess heat energy dissipates into the surroundings, causing a drop in the temperature of the reaction mixture.
The decrease in temperature at the stoichiometric point is a result of the endothermic nature of the excess heat release, counteracting the exothermic nature of the reaction up to that point. This phenomenon is commonly observed in various chemical reactions and provides important insights into the energy changes occurring during the reaction process.
Learn more about reactant here: https://brainly.com/question/29035733
#SPJ11
what are the concentrations of carbon in α-ferrite and fe3c at a temperature just below 727°c? you may want to use animated figure 9.24.
At a temperature just below 727°C, we are in the two-phase region of the iron-carbon phase diagram known as the austenite (γ) + cementite (Fe3C) region. This region is also referred to as the eutectoid temperature.
When the eutectoid temperature is reached, the γ phase transforms into two distinct phases: α-ferrite (α) and Fe3C. The α-ferrite phase has a body-centered cubic (BCC) crystal structure, while Fe3C, also known as cementite, has an orthorhombic crystal structure.
The carbon concentration in α-ferrite and Fe3C at a temperature just below 727°C is determined by the eutectoid composition, which is approximately 0.76% carbon. At this composition, the weight percentage of carbon in both phases is as follows:
α-Ferrite (α): The α-ferrite phase can dissolve a maximum of around 0.022% carbon at this temperature. Thus, the concentration of carbon in α-ferrite just below 727°C is very low, significantly below 0.022%.Fe3C (cementite): The Fe3C phase has a fixed composition of approximately 6.7% carbon. Therefore, the concentration of carbon in Fe3C just below 727°C is approximately 6.7%.Please note that the concentrations provided here are approximate and may vary slightly depending on the specific alloy composition and thermal history. I recommend referring to appropriate phase diagrams or materials science resources for more precise data and figures.
Learn more about concentrations here : brainly.com/question/3045247
#SPJ11
which of the following molecules or ions contain an oxygen atom with a positive formal charge?
a. CO2
b. CO
c. CO2^-2
d. H2O
Carbonate ions [tex]CO_2^{-2}[/tex] contain an oxygen atom with a favorable elevated charge. Thus, option C is correct.
The carbonate ion is a compound that is formed by sharing valency shell electrons of Carbon and Oxygen elements. After forming, the oxygen atom in the middle has a positive formal charge. This is because each oxygen atom in the carbon will be assigned a formal charge of -1.
In this reaction, when the compound is double-bonded, the oxygen atom in the middle has only six electrons in the valence shell instead of eight electrons, resulting in a positive formal charge of +2 after the reaction.
To learn more about carbonate ion
https://brainly.com/question/31215748
#SPJ4
Calculate the pH for each of the following cases in the titration of 25.0 mL of 0.140 M pyridine, C5H5N(aq) with 0.140 M HBr(aq): (a) before addition of any HBr (b) after addition of 12.5 mL of HBr (c) after addition of 23.0 mL of HBr (d) after addition of 25.0 mL of HBr (e) after addition of 31.0 mL of HBr
(a) pH before addition of any HBr: It is basic since pyridine is a weak base.
(b) pH after addition of 12.5 mL of HBr: pH is calculated using the Henderson-Hasselbalch equation since pyridine acts as a buffer.
(c) pH after addition of 23.0 mL of HBr: pH is still calculated using the Henderson-Hasselbalch equation.
(d) pH after addition of 25.0 mL of HBr: pH is at the equivalence point, where the pyridine is completely neutralized, resulting in a pH close to 7.
(e) pH after addition of 31.0 mL of HBr: pH becomes acidic as excess HBr is added.
(a) Before adding any HBr, the solution contains only pyridine, which is a weak base. The pH will be basic, likely above 7.
(b) After adding 12.5 mL of HBr, the solution forms a buffer system. The Henderson-Hasselbalch equation can be used to calculate the pH, which is determined by the ratio of the concentration of the conjugate acid (pyridinium ion) to the concentration of the base (pyridine).
(c) As more HBr is added (23.0 mL), the buffer system is still present, and the pH can be calculated using the Henderson-Hasselbalch equation.
(d) When 25.0 mL of HBr is added, it is at the equivalence point. The pyridine is completely neutralized, resulting in a pH close to 7, which is considered neutral.
(e) Adding more HBr (31.0 mL) beyond the equivalence point makes the solution increasingly acidic, as the excess HBr dissociates and increases the concentration of H+ ions.
To learn more about pH, here
https://brainly.com/question/32445629
#SPJ4
A 10. 0-mL sample of 1. 0 M NaHCO3 is titrated with 1. 0 M HCl (hydrochloric acid). Approximate the titration curve by plotting the following points: pH after 0 mL HCl added, pH after 1. 0 mL HCl added, pH after 9. 5 mL HCl added, pH after 10. 0 mL HCl added (equivalence point), pH after 10. 5 mL HCl added, and pH after 12. 0 mL HCl added
A titration curve is a graph showing the progress of a titration of a mixture of chemicals as a function of the amount of reactant added. A plot of pH vs. quantity of titrant added is a typical titration curve.
The curve's form is determined by the nature of the titrant, the nature of the sample being evaluated, the extent of the acid-base reaction, and the concentration of the reactants. Furthermore, the equivalence point, which is the point at which the quantity of titrant added is just enough to neutralize the sample being titrated, is often indicated on a titration curve. The titration curve for a strong base-weak acid titration and the titration curve for a weak acid-strong base titration differ slightly, with different pH ranges and shapes. In general, the titration curve of a weak acid-strong base titration begins and ends at higher pH values than the titration curve of a strong acid-weak base titration. In addition, the titration curve of a weak acid-strong base titration has a distinct inflection point that is not present in the titration curve of a strong acid-weak base titration.
Finally, the titration curve of a weak acid-strong base titration is shown below. Therefore, let's look at the pH values of NaHCO3 titrated with 1.0 M HCl. 1. pH after 0 mL HCl addedThe pH of NaHCO3, which is a weak base, is slightly basic, or around 8.4.2. pH after 1.0 mL HCl addedWe will see a little decrease in pH when we add 1.0 mL of 1.0 M HCl to 10.0 mL of 1.0 M NaHCO3.3. pH after 9.5 mL HCl addedThe pH of NaHCO3 is about 4.5 at this point. This is the endpoint of the weak acid-strong base titration.4. pH after 10.0 mL HCl addedThe equivalence point is reached after adding 10.0 mL of HCl, which corresponds to the neutralization of 10.0 mL of 1.0 M NaHCO3. The pH at the equivalence point of a weak acid-strong base titration is around 7.0.5. pH after 10.5 mL HCl addedAt this point, the pH of the mixture is more acidic, approximately 3.5.6. pH after 12.0 mL HCl addedThis point will be more acidic than the previous point, and the pH will be around 2.0 to 2.5.
To know more about titration curve visit:-
https://brainly.com/question/30826030
#SPJ11
A Doctors Order requests 500 mg of ampicillin IV in a 50-mL MiniBag of 0.9% sodium chloride injection. You have a 4-g vial of sterile powder, which, when reconstituted, will provide 100 mg/mL of ampicillin. How many millilitres of reconstituted solution will be needed to provide the 500-mg dose?
A. 4 ml
B. 5 ml
C. 2.5 ml
D. 25 ml
2. Rx: Penicillin G potassium 500 000 units IV q6h in 50-mL MiniBag of 0.9% sodium
chloride injection. You have a vial of Penicillin G containing 5 000 000 units. After
reconstitution, the total volume of the vial is 20 mL, How many millilitres of penicillin
should be drawn up to provide the prescribed dose for each 50-mL MiniBag?
A. 0.5 mL
B. 1 mL
C. 4 mL
D. 2 mL
3, In reference to question 2, how many 50-mL MiniBags would you provide to cover 24
hours of treatment?
A. 1
B. 6
C. 3
D. 4
4. Rx: Dexamethasone 12 mg IV push Drug available: Dexamethasone 4 mg/5 mL How
many millilitres would be needed to be drawn up for one dose?
A. 3 ml
B. 2.4 ml
C. 10 ml
D. 15 ml
5. Rx: Heparin 40 000 units in D5W 1000 mL Drug available: Heparin 10 000 units/mL 2
mL single-dose vial How much heparin solution would be injected into the D5W 1000-
mL bag?
A. 1 ml
B. 2 mL
C. 4 mL
D. 8 mL
(1) The volume of reconstituted solution is 5 mL. Option B is correct. (2)The amount of penicillin needed is 0.5 mL. Option A is correct. (3)Total 4 Mini-Bags o cover 24 hours of treatment. Option D is correct. (4)Total, 15 ml. will be needed to drawn up for one dose. Option D is correct. (5)The required amount of heparin solution is 8 mL. Option D is correct.
To calculate the volume of reconstituted solution needed to provide the 500 mg dose of ampicillin, we can use the formula;
Volume (mL) = Dose (mg) / Concentration (mg/mL)
Dose = 500 mg
Concentration = 100 mg/mL
Volume (mL) = 500 mg / 100 mg/mL
= 5 mL
Hence. B. is the correct option.
To calculate the amount of penicillin needed to provide the prescribed dose for each 50-mL MiniBag, we can use the ratio:
Prescribed dose : Total amount in the vial = Volume drawn up : Volume of the vial
Prescribed dose = 500,000 units
Total amount in the vial = 5,000,000 units
Volume of the vial = 20 mL
Volume drawn up = (Prescribed dose / Total amount in the vial) × Volume of the vial
Volume drawn up = (500,000 units / 5,000,000 units) × 20 mL
Volume drawn up = 0.1 mL
Hence, A. is the correct option.
To cover 24 hours of treatment, you would provide the number of MiniBags required to administer the prescribed dose every 6 hours:
24 hours / 6 hours = 4 MiniBags
Hence, D. is the correct option.
The required dose is 12 mg, and the available concentration is 4 mg/5 mL. We can use the ratio;
Dose : Concentration = Volume drawn up : Total volume
Dose = 12 mg
Concentration = 4 mg/5 mL
Volume drawn up = (Dose / Concentration) × Total volume
Volume drawn up = (12 mg / 4 mg/5 mL) × 5 mL
Volume drawn up = 15 mL
Hence, D. is the correct option.
The required amount of heparin solution to be injected into the D5W 1000-mL bag can be calculated using the ratio:
Amount to be injected : Concentration = Volume drawn up : Total volume
Amount to be injected = 40,000 units
Concentration = 10,000 units/mL
Volume drawn up = (Amount to be injected / Concentration) × Total volume
Volume drawn up = (40,000 units / 10,000 units/mL) × 2 mL
Volume drawn up = 8 mL
Hence, D. is the correct option.
To know more about heparin solution here
https://brainly.com/question/29799469
#SPJ4
How do the numbers in the “R3” and “T2” columns compare?
The R3 and T2 columns provide information about the quality of the regression model. The t-value is used to determine the significance of each coefficient, while the R-squared value indicates how well the model fits the data.
In statistics, the R-squared value and the t-value are both significant indicators of a model's goodness of fit. The R-squared value, often known as the correlation coefficient, is a measure of how well the model fits the data. A correlation coefficient value ranges from -1 to +1, with 0 indicating no correlation and 1 indicating a perfect positive correlation. A negative 1 indicates a perfect negative correlation.The t-value indicates whether the coefficient is statistically significant or not. If the p-value is less than the chosen alpha level, the t-value is significant.The R3 and T2 columns are related to the regression model's goodness of fit. The t-value column contains the t-statistic for each coefficient, while the R-squared column contains the R-squared value for the model. The t-value, as previously stated, is used to test the hypothesis that each coefficient is zero. The coefficient is considered to be significant if the t-value is greater than the critical value. The R-squared value, on the other hand, measures how well the regression model fits the data. The R-squared value ranges from 0 to 1, with 1 indicating a perfect fit and 0 indicating no correlation between the model and the data. In general, higher R-squared values indicate a better fit.
For more questions on regression
https://brainly.com/question/14748385
#SPJ8
write and balance a combustion reaction for the complete combustion of each molecule c9h16, c10h20, and c8h20.
combustion reaction for the complete combustion of each molecule is C9H16 + 12.5O2 → 9CO2 + 8H2O, C10H20 + 15O2 → 10CO2 + 10H2O, and C8H20 + 12.5O2 → 8CO2 + 10H2O.
To balance the combustion reactions, we need to ensure that the number of atoms of each element is the same on both sides of the equation.
Combustion of C9H16:
C9H16 + O2 → CO2 + H2O
To balance the carbon atoms, we need 9 CO2 molecules on the product side. To balance the hydrogen atoms, we need 8 H2O molecules on the product side. Finally, to balance the oxygen atoms, we calculate the total number of oxygen atoms present in the reactant and product:
Reactant: 1 O2 molecule = 2 oxygen atoms
Product: 9 CO2 molecules + 8 H2O molecules = 9 * 2 + 8 * 1 = 26 oxygen atoms
Therefore, we need 12.5 O2 molecules as the coefficient for O2 to balance the oxygen atoms. The balanced equation is:
C9H16 + 12.5O2 → 9CO2 + 8H2O
Combustion of C10H20:
C10H20 + O2 → CO2 + H2O
Following the same process as above, we determine that the balanced equation is:
C10H20 + 15O2 → 10CO2 + 10H2O
Combustion of C8H20:
C8H20 + O2 → CO2 + H2O
The balanced equation for this combustion reaction is:
C8H20 + 12.5O2 → 8CO2 + 10H2O
Learn more about molecule: https://brainly.com/question/475709
#SPJ11
a reaction of the stoichiometry is started with 0.0 m and 2.0 m. at a certain time 1.0 m and the concentrations of are
By using the stoichiometry of the reaction and the given initial and final concentrations of S, [Q]* = 1.5 M, [R]* = 1.0 M (Option 4)
To determine the concentrations of Q and R at time t = t*, we can use the stoichiometry of the reaction and the given initial and final concentrations of S.
The stoichiometry of the reaction is: Q + 2R --> 2S
Initially, we have [S]₀ = 0.0 M, [Q]₀ = [R]₀ = 2.0 M
At time t = t*, [S]* = 1.0 M.
Since 2 moles of S are produced for every mole of Q, and each mole of S is produced from 2 moles of R, the decrease in concentration of S from 2.0 M to 1.0 M indicates the consumption of 1 mole of S.
Therefore, we can conclude that 0.5 moles of Q and 1 mole of R were consumed to produce 1 mole of S.
Starting with [Q]₀ = [R]₀ = 2.0 M, and taking into account the consumption of 0.5 moles of Q and 1 mole of R, we can calculate the concentrations at time t = t*:
[Q]* = [Q]₀ - (0.5 mol/L) = 2.0 M - 0.5 M = 1.5 M
[R]* = [R]₀ - (1 mol/L) = 2.0 M - 1.0 M = 1.0 M
Therefore, the concentrations of Q and R at time t = t* are:
[Q]* = 1.5 M
[R]* = 1.0 M
So, the correct answer is:
[Q]* = 1.5 M, [R]* = 1.0 M.
The correct question is:
A reaction of the stoichiometry Q + 2R --> 2S is started with [S]₀ = 0.0 M and [Q]₀ =[R]₀ = 2.0 M . At a certain time, t =t* , [S]* = 1.0 M.
At time t =t* , the concentrations of Q and R are:
[Q]* = 1.0 M, [R]* = 0.0 M .[Q]* = 1.0 M, [R]* = 1.0 M .none of these[Q]* = 1.5 M , [R]* = 1.0 M .[Q]* = 1.0 M , [R]* = 1.5 M .To know more about stoichiometry follow the link:
https://brainly.com/question/28780091
#SPJ4