The % mass of copper in your product will be 3.93 %.
Calculated slope = 64.52
Mass of copper product = 0.059 g
Initial volume (V1) = 25 ml
Final volume (V2) = 100 ml
Absorbance (A) = 0.374
% mass of copper = ?
To find out the concentration (C) we use the following equation
C = A / slope
Put the values
C (M2) = 0.374 / 64.52
C (M2) = 0.005797 g/L
To calculate M1 we use the following equation.
M1V1 = M2V2
M1 = 0.005797 * 100 ml / 25 ml
M1 = 0.0232 g/L
mass of copper = Penny solution x Volume
mass of copper = 0.0232 g/L x 0.1 L
mass of copper = 0.00232 g
% mass of copper = (total mass of copper ÷ mass of penny) x 100
% mass of copper = (0.00232/ 0.059 ) x 100
% mass of copper = 3.93 %
You can also learn about percent mass from the following question:
https://brainly.com/question/5394922
#SPJ4
Write a net ionic equation for the reaction that occurs when aqueous solutions of nitric acid and sodium hydroxide are combined.
Be sure to specify states such as (aq) or (s).
Answer:
H^+(aq) + OH^-(aq) -------> H2O(l)
Explanation:
We must first write the molecular reaction equation as follows;
HNO3(aq) + NaOH(aq) ------>NaNO3(aq) + H2O(l)
The complete ionic equation is;
H^+(aq) + NO3^-(aq) + Na^+(aq) + OH^-(aq) -------> Na^+(aq) + NO3^-(aq) + H2O(l)
The net ionic equation therefore is;
H^+(aq) + OH^-(aq) -------> H2O(l)
What causes the expression of a recessive trait? one dominant and one recessive factor (allele) one dominant gene two recessive factors (alleles) two dominant factors (alleles)
Answer: i think it’s two recessive alleles
Explanation:
Answer:Two recessive alleles is correct
Explanation:
I TOOK THE TEST (k-12 student) TwT
A form of energy that is related to its temperature...
nuclear energy
thermal energy
potential energy
kinetic energy
Answer:
Kinetic Energy
Explanation:
Temperature and Kinetic Energy are directly proportional.
What is the temperature?
Answer:
17.25 degrees
Explanation:
....but I cannot tell you if that is °C or °F <===== that is left out of the question.
Under which condition will the atmospheric pressure be greater. When the air is cold, or when the air is warm
Colour of crushed chalk + Iodine solution
Which solution is more concentrated?
0.5 M NaCl
0.005 M NaCl
0.05 M Nacl
5.0 M NaCl
Answer: 5.0 M NaCl
Explanation:
A concentrated solution is one which has more amount of solute in it.
A dilute solution is one which has less amount of solute in it.
Molarity is defined as the number of moles of solute present per liter of the solution.
0.5 M NaCl will have 0.5 moles of NaCl in 1 L of the solution, 0.005 M NaCl has 0.005 moles of NaCl in 1 L of the solution, 0.05 M NaCl has 0.05 moles of NaCl in 1 L and 5.0 M NaCl has 5 moles of NaCl in 1 L.
Thus 5.0 M NaCl will be most concentrated.
A gas has three initial measurements: temperature 306 K, pressure 740 mm Hg, and volume 36 mL. The gas's temperature is increased to 850 K while its pressure is increased to 1750 mm Hg. What is the new volume of the gas in mL?
Answer:
The new volume of the gas is 42.28 mL.
Explanation:
Gay Lussac's law indicates that when there is a constant volume, as the temperature increases, the pressure of the gas increases. And when the temperature is decreased, the pressure of the gas decreases. This law can be expressed mathematically as follows:
[tex]\frac{P}{T}=k[/tex]
where k = Constant
Boyle's law says that "The volume occupied by a given gaseous mass at constant temperature is inversely proportional to pressure." This law is expressed mathematically as:
P * V = k
Finally, Charles's Law indicates that as the temperature increases, the volume of the gas increases and as the temperature decreases, the volume of the gas decreases. In summary, Charles's law is a law that says that when the amount of gas and pressure are kept constant, the quotient that exists between the volume and the temperature will always have the same value:
[tex]\frac{V}{T}=k[/tex]
Combined law equation is the combination of three gas laws called Boyle's, Charlie's and Gay-Lusac's law:
[tex]\frac{P*V}{T}=k[/tex]
Studying an initial state 1 and a final state 2, it is satisfied:
[tex]\frac{P1*V1}{T1}=\frac{P2*V2}{T2}[/tex]
In this case:
P1= 740 mmHgV1= 36 mLT1= 306 KP2= 1750 mmHgV2= ?T2= 850 KReplacing:
[tex]\frac{740 mmHg*36 mL}{306 K}=\frac{1750 mmHg*V2}{850 K}[/tex]
Solving:
[tex]V2=\frac{850 K}{1750 mmHg} *\frac{740 mmHg*36 mL}{306 K}[/tex]
V2= 42.28 mL
The new volume of the gas is 42.28 mL.
Explain how the bonding model for sodium metal would differ from the bonding model for sodium chloride, NaCi
The bonding in NaCl involves a sodium ion and a chloride ion while the bonding in sodium metal involves sodium ions and a sea of electrons.
NaCl involves sodium and ion and chloride ion held together by an ionic bond. The sodium atom transfers an electron to chlorine atom to yield the chloride ion. This ion pair exists in the compound called sodium chloride.
In sodium metal, the sodium cations interact electrostatically with a sea of electrons in a metallic bond. Hence, while the bonding in sodium chloride involves an ion pair, the bonding in sodium metal involves sodium ions and a sea of electrons.
Learn more: https://brainly.com/question/11527546
Which phrase best describes an individual organ
Answer:
the answer is B
Explanation:
When elements bond together they use energy in the bonding process.
What is this energy process called?
Answer:
chemical energy
Explanation:
This energy process is called exothermic when the reactants are at a higher energy level as compared to the products while it is an endothermic process if the reactant require energy to form products.
What is the process of bonding ?The covalent bonds that bring atoms together in the form of molecules store potential energy. This is commonly referred to as chemical energy.
When two different elements bond together to form compounds , the covalent bonds initial present are broken and new bonds are formed .
The energy level of the new formed compound will be lower than the individual atom as the difference in energy level of both the elements is released as heat.
This energy process is called exothermic when the reactants are at a higher energy level as compared to the products while it is an endothermic process if the reactant require energy to form products.
To know more about bonding
https://brainly.com/question/10777799
#SPJ2
How many mL are in 5.000 L
Answer:
Start off and multiply the volume value by 1000,
so that would mean
5000 x 1000
= 5,000,000 mL
The attraction between water molecules and a Nation or a Clion occurs because water molecules are —
A.
nonpolar
B
symmetrical.
С
polar.
D
linear.
Answer:
answer is
c. Polar
hope this helps
Hey guys so my cuz gave me this stone when he went to mexico
can u plz tell me what kind of stone this is?
Answer:
pretty sure that's an old jolly rancher
Your friend says, “chemical changes are caused by an input in energy. In physical changes, there is no transfer of energy” is your friend correct? Why or why not?
Answer: Your friend is incorrect.
Explanation: If we have an object or something that isn’t moving, (let’s say a notebook on a desk). If there is change, and the notebook moves, there is acceleration. Force = Mass times acceleration, f = m*a. There has to be a force, first of all. If you touched the notebook and moved it, some of your energy is transferred and now the notebook has kinetic energy. If our system is you and the notebook, the total energy doesn’t change. the energy is transferred, but doesn’t change. Your friend is not correct. Please give brainliest hope this helped!
which properties should Beryllium (Be) have?
A. Liquid
B. Low melting point
C. Shiny
D. Poor conductor
The boiling process is considered to be____
your answer is D. physical change, because a new substance is not formed.
The boiling process is considered to be a physical change as no new substance is formed.
What is a physical change?Physical changes are defined as changes which affect only the form of a substance but not it's chemical composition. They are used to separate mixtures in to chemical components but cannot be used to separate compounds to simpler compounds.
Physical changes are always reversible using physical means and involve a change in the physical properties.Examples of physical changes include melting,boiling , change in texture, size,color,volume and density.Magnetism, crystallization, formation of alloys are all reversible and hence physical changes.
They involve only rearrangement of atoms and are often characterized to be changes which are reversible.
Learn more about physical change,here:
https://brainly.com/question/17931044
#SPJ2
Please help me pretty please
Answer:
The answer would probably be C. The clock can be seen and heard.
What structural units make up ionic solids?
O A. Molecules
B. Nonmetal atoms
O C. Metal atoms
O D. lons
The option that is the structural units that make up ionic solids is option D. Ions
What are ionic solids?Ionic solids are made up of ions, which are atoms or groups of atoms that have a positive or negative charge due to the gain or loss of electrons. In ionic solids, the positive ions (cations) are typically formed by metal atoms, while the negative ions (anions) are typically formed by nonmetal atoms. The ions in ionic solids are held together by electrostatic forces of attraction, called ionic bonds.
Therefore, These bonds are formed when the electrons from the outermost energy level of the metal atom are transferred to the outermost energy level of the nonmetal atom, creating a stable compound.
Learn more about ionic solids from
https://brainly.com/question/2773282
#SPJ1
Help me pretty please
Answer:
I think it is D
Explanation:
State two methods to increase the rate of the chemical reaction and explain
for each, in terms of particle behavior, how each method would increase
reaction rate.
METHOD 1:
Explanation:
METHOD 2:
Explanation:
Answer:
METHOD 1: (surface area of a solid reactant) METHOD 2: (concentration or pressure of a reactant)
Explanation:
METHOD 1: (surface area of a solid reactant) Increasing the surface area of a solid reactant exposes more of its particles to attack. This results in an increased chance of collisions between reactant particles, so there are more collisions in any given time and the rate of reaction increases.
METHOD 2: (concentration or pressure of a reactant) Increasing the concentration means that we have more particles in the same volume of solution. This increases the chance of collisions between reactant particles, resulting in more collisions in any given time and a faster reaction. As we increase the pressure of reacting gases, we increase the rate of reaction.
Which one is it? It’s in my science class and i have no idea
Answer:
More energy then closer electrons.
Explanation:
As electrons move away from the nucleus, their energy increases.
any force that causes an object to move in a circle is called
Answer: Any force that causes an object to move in a circle is called centripetal force.
How many molecules are in 8.2 moles of water,H2o
Answer:
4.938×10^24 molecules
Explanation:
a mole is 6.023×10^23
(8.2)×(6.023×10^23)=4.938×10^24
If the statement is true, write true. If the statement is false, change the underlined word or words to make the statement true.
3. ________________ If you increase the force on an object, its acceleration increases.
4. ________________ If you increase the mass of an object, its acceleration decreases.
5. ________________ To accelerate a 3 kg skateboard at 9 m/s 2 , a force of 3 newtons is needed.
6. ________________ The amount of inertia an object has depends on its speed.
Answer:
3 - True
4 - True
5 - False
6 - False
9.) How many grams of phosphorus can be recovered
from 245.0 g triphosphorus pentanitride?
a.) 139.7 g
b.) 105.3 g
c.) 57.01 g
According to stoichiometry as 162.955 g of phosphorous pentanitride has 92.919 g of phosphorous , thus 245 g of phosphorous pentanitride will have 139.7 grams of phosphorous.
What is stoichiometry?Stoichiometry is the determination of proportions of elements or compounds in a chemical reaction. The related relations are based on law of conservation of mass and law of combining weights and volumes.
Stoichiometry is used in quantitative analysis for measuring concentrations of substances present in the sample.It is important as it helps the chemical reactions to obey law of conservation of mass.
As 162.955 g of phosphorous pentanitride=92.919 g of phosphorous
∴ 245 g of phosphorous pentanitride =245×92.919/162.955=139.702 g.
Thus, 139.702 g of phosphorus can be recovered from 245.0 g triphosphorus pentanitride.
Learn more about stoichiometry,here:
https://brainly.com/question/9743981
#SPJ2
How many molecules are there in 6.73 moles of phosphorus trichloride? (write your answer in scientific notation).
Answer: There are [tex]4.05\times 10^{24}[/tex] molecules in 6.73 moles of phosphorus trichloride
Explanation:
According to avogadro's law, 1 mole of every substance occupies 22.4 L at STP and contains avogadro's number [tex]6.023\times 10^{23}[/tex] of particles.
1 mole of [tex]PCl_3[/tex] contains = [tex]6.023\times 10^{23}[/tex] molecules
Thus 6.73 moles of [tex]PCl_3[/tex] contains = [tex]\frac{6.023\times 10^{23}}{1}\times 6.73=4.05\times 10^{24}[/tex] molecules
Thus there are [tex]4.05\times 10^{24}[/tex] molecules in 6.73 moles of phosphorus trichloride
1. Which functional group is found in an ester? (1 point)
Answer:
2nd one
Explanation:
Fact!
PLEASE HELP ME ASAPPPPPPPP!!!!!!
Answer:
I think C But I can't really see it well
help please. its over dilutions in chemistry
Answer:
The molarity of the solution is given as 0.15 M. This means that it contains 0.15 moles of NaOH in 1 liter of solution.
hope this helps you☺️☺️