You have three sodium carbonate solutions on a lab table in front of you. All of the solutions came from a 500.0-mI. volumetric flask containing 3.00 M sodium carbonate
Solution 1 contains 100.0 mL of the 3.00 M solution.
Solution 2 contains 50.0 mL of the 3.00 M solution.
Solution 3 contains 10.0 mL of the 3.00 M solution.
What is the new concentration of Solution 2 if 15.8 g of solid sodium carbonate is added and dissolved? (Assume no volume change.)

Answer:

the answer is the option C

Step 1: Start with the end in mind - we want to determine the number of moles of gallium chloride.

Step 2: Cancel out the units from step 1 - we can use the balanced equation to convert the volume of the 1.44 M solution of HI to moles of GaCl2. Specifically, we need to use the stoichiometric ratio between HI and GaCl2, which is 6:2 or 3:1. This means that for every 3 moles of HI reacted, 1 mole of GaCl2 is produced.

Step 3: Cancel out the units from step 2 - we can convert the volume of the solution to moles of HI using the concentration (1.44 M).

Step 4: Multiply the top - we can use the following calculation to determine the number of moles of GaCl₂ produced:

(2.6 L) x (1.44 mol/L) x (1 mol GaCl2/3 mol HI) = 1.251 mol GaCl₂

Step 5: Divide the top by the bottom - we don't need to divide anything since we already have the final answer.

Step 6: Write your answer with the correct number of significant figures and correct units - the answer is 1.251 mol of GaCl₂. We should round this to 3 significant figures since the volume given in the problem only has 2 significant figures. So the final answer is 1.25 mol of GaCl₂.

To know more about stoichiometric ratios, visit:

https://brainly.com/question/29841194

#SPJ1

Answer:

When a piece of iron that is 25 °C is dropped into water that is 15 °C, the heat from the iron will dissipate into the water until the temperature is the same by conduction. Thus, option A is correct.

What is conduction?

Conduction is the transfer of the dissipated energy from the hot iron metal at 25 °C to the water at a lower temperature. The heat or the energy molecules gets transferred from the region of high to lower temperature.

This occurs through the diffusion that allows the hot iron to release the energy from its body that diffuses and gets transferred to the water molecules that have a tempearture of 15 °C, which is lower than that of the iron.

Therefore, the piece of the iron loses its heat to the water till both have the same tempearture.

The new pressure of the gas at a volume of 23 mL is 17.9 atm

The fundamental equation in physics and chemistry, known as the ideal gas law, is crucial in describing the behavior of an ideal gas. This theoretical gas consists of numerous small particles that are constantly moving randomly without any interaction except for perfectly elastic collisions. The ideal gas law establishes a relationship between pressure, volume, temperature, and the number of particles present in an ideal gas. The equation is expressed as PV = nRT.

According to the ideal gas law, the pressure (P), volume (V), and number of moles (n) of a gas are related by the equation:

PV = nRT

where R is the gas constant and T is the absolute temperature of the gas. Assuming that the number of moles of gas and the temperature remain constant during the compression process, we can write:

P1V1 = P2V2

Substituting the given values, we get:

P2 = P1V1/V2 = (1.50 atm)(275 mL)/(23 mL) = 17.9 atm

To know more about Ideal gas law, click here

https://brainly.com/question/28257995

#SPJ1

The hydronium ion concentration, [H₃O⁺], for a solution with a pH of 5.71 is 2.10 x 10⁻⁶ M.

The pH of a solution is defined as the negative logarithm (base 10) of the hydronium ion concentration, [H₃O⁺]. Therefore, we can use the pH value of 5.71 to calculate the hydronium ion concentration as follows:

pH = -log[H₃O⁺]

5.71 = -log[H₃O⁺]

log[H₃O⁺] = -5.71

[H₃O⁺] = -5.71 ÷ log

[H₃O⁺] = 2.10 x 10⁻⁶ M

The hydronium ion is formed when a water molecule accepts a proton (H⁺) from an acid. Low pH has a high concentration of hydronium ions and is considered acidic. Conversely, solutions with a high pH have a low concentration of hydronium ions and are considered basic.

To learn more about hydronium follow the link:

https://brainly.com/question/14619642

#SPJ1

If a less concentrated initial solution of sodium bicarbonate was used in beaker C, it would require more bicarbonate to neutralize the acid.

Concentrated means something that has been increased in strength or power by reducing its volume. It can refer to a solution that has a higher concentration of solutes than the original solution, a sound that is louder or stronger, or a force that is more powerful or intense. Concentrated can also refer to a person’s focus or attention on one particular thing, when their thoughts and energy are directed to a single point.

This is because the concentration of sodium bicarbonate determines how much of the acid can be neutralized by the solution. If the initial solution is less concentrated, then it will take more of the bicarbonate to neutralize the same amount of acid.

To learn more about concentrated
https://brainly.com/question/30558048
#SPJ1

Answer: pH of the solution is 5.47

Explanation: Since HNO3 is a strong acid the concentration of H+ is the same as NO3- only because they are in 1-to-1 ratio. Both ions will have 3.4 x 10^-6 M.

The formula of pH is: pH = -log( the equilibrium concentration of H+ )

When you plug in the concentration of H+:

pH = -log (3.4 x 10^.6 M)

pH = 5.47

Remember: Only the digits after the decimal point are significant figures in logarithms.

For example: 5.47 only has 2 significant figures.

The number of grams in the specified moles for each compounds are;

1. Dinitrogen Pentoxide would be 1328.523 g

2. Iron (III) Nitrate = 653.076 g

3.   Sucrose (C12H22O11) = 54.7744 g

4. Potassium Iodide (KI) = 144.42 g

1. The molar mass of N2O5 = (2 × atomic mass of N) + (5 × atomic mass of O)

(2×14.01 g/mol) + (5 × 16.00 g/mol)

= 28.01 g/mol + 80.00 g/mol

Molar mass of N2O5 = 108.01 g/mol

12.3 moles× 108.01 g/mol = 1328.523

2. The molar mass of Fe(NO3)3 = atomic mass of Fe + 3 × (atomic mass of N + 3 × atomic mass of O)

(55.85 g/mol) + 3 × (14.01 g/mol) + 3 × (16.00 g/mol))

Molar mass of Fe(NO3)3 = 241.88 g/mol

2.7 moles × 241.88 g/mol = 653.076 g

3. Sucrose (C12H22O11):

The molar mass of C12H22O11 = (12×atomic mass of C) + (22×atomic mass of H) + (11 × atomic mass of O)

= (12×12.01 g/mol) + (22 × 1.01 g/mol) + (11 × 16.00 g/mol)

= 144.12 g/mol + 22.22 g/mol + 176.00 g/mol

= 342.34 g/mol

0.16 moles × 342.30 g/mol = 54.7744 g

4. Potassium Iodide (KI):

The molar mass of KI = atomic mass of K + atomic mass of I

= (39.10 g/mol) + (126.90 g/mol)

= 166.00 g/mol

So, 0.87 moles of KI = 0.87 moles × 166.00 g/mol = 144.42 grams

Find more exercises for solving grams or compounds;

https://brainly.com/question/2312089

#SPJ1

Answer: C) enzymes

When the end product of protein hydrolysis enter the cytoplasm of a cell, they may become building blocks for the synthesis of enzymes

Answer: To convert grams (g) to moles (mol), we need to use the molar mass of the substance. We can use the following formula:

moles = mass (in grams) / molar mass

We will assume that we are given the mass of a pure substance. If the substance is a compound, we will need to look up the molar mass in the periodic table or calculate it using the atomic masses of its elements.

Let's assume that we are given 18.2 g of a pure substance and we want to convert it to moles. We will need to look up the molar mass of the substance. For example, let's say the substance is water (H2O):

Molar mass of H2O = 2(1.008 g/mol) + 1(15.999 g/mol) = 18.015 g/mol

Now we can use the formula to convert grams to moles:

moles = 18.2 g / 18.015 g/mol = 1.009 mol

Therefore, 18.2 g of the substance is equivalent to 1.009 mol of the substance.

Answer:

Gas pressure= 766.4 mmHg

Explanation:

Gas pressure greater than atmospheric pressure = Atmospheric pressure + height

750.0 mmHg + 26.4 cm = 766.4 mmHg

Answer:

A

Explanation:

A. They are cooler than the surrounding area of the Sun.

Sunspots are regions on the Sun's photosphere where the magnetic fields are extremely strong, inhibiting the convective flow of hot gas from the solar interior. These regions appear darker than the surrounding photosphere because they are cooler (around 3,500-4,500 K) than the surrounding areas (around 5,500 K), making them less luminous.

The molarity of the KMnO₄ solution is 0.0491 M.

To determine the molarity of the KMnO₄ solution, we need to use the stoichiometry of the balanced chemical equation to calculate the number of moles of KMnO₄ that reacted with the H₂C₂O₄ solution.

The number of moles of H₂C₂O₄ in the solution is:

n(H₂C₂O₄) = conc(H₂C₂O₄) x V(H₂C₂O₄)

= 0.0505 M x 0.020 L

= 0.00101 mol

The number of moles of KMnO₄ in the solution is:

n(KMnO₄) = (2/5) x n(H₂C₂O₄)

= (2/5) x 0.00101 mol

= 0.000404 mol

Assume that the number of moles of KMnO₄ in the solution is equal to the number of moles of H₂C₂O₄ in the solution:

n(KMnO₄) = n(H₂C₂O₄)

= 0.00101 mol

The volume of the KMnO₄ solution to calculate the molarity:

M(KMnO₄) = n(KMnO₄) / V(KMnO₄)

= 0.00101 mol / 0.02055 L

= 0.0491 M

To learn more about molarity follow the link:

https://brainly.com/question/8732513

#SPJ1

Concentration of species capable of effective interactions: Ionic Strength

Correction factor applied to concentrations based on the ionic strength of the solution: Activity coefficient.

Coefficient is a numerical or constant quantity that is placed in front of a variable or term. The term "coefficient" comes from the Latin word "coefficiente  which means "a joint or mutual agreement."

In algebra, coefficients are used to represent the relative size or weight of a variable or term. For example, in the expression 3x + 2y, the coefficients are 3 and 2, which indicate that the variable x has a weight of 3 and the variable y has a weight of 2.

To know more about coefficient visit :

https://brainly.com/question/28975079

#SPJ1

The molarity of a solution containing 74.6 g of C2H6O in 2.36 L of solution is 0.685 M.

We need to know the number of moles of solute and the volume of the solution in liters.

First, let's calculate the number of moles of C2H6O:

Molar mass of C2H6O = (2 x atomic mass of C) + (6 x atomic mass of H) + (1 x atomic mass of O)

= (2 x 12.01 g/mol) + (6 x 1.01 g/mol) + (1 x 16.00 g/mol)

= 46.07 g/mol

Number of moles of C2H6O = mass of C2H6O / molar mass of C2H6O

= 74.6 g / 46.07 g/mol

= 1.618 moles

Now, let's calculate the molarity of the solution:

Molarity = number of moles of solute / volume of solution in liters

= 1.618 moles / 2.36 L

= 0.685 M

Therefore, the molarity of a solution containing 74.6 g of C2H6O in 2.36 L of solution is 0.685 M.

Learn more about molarity here : brainly.com/question/30404105

#SPJ1

Answer:

1) Nuclear energy is a non-renewable resource because it relies on uranium to generate power. Uranium is a radioactive element not found in large quantities on Earth. Once it is used to fuel a nuclear reactor, it cannot be reused. This means that once all the uranium is gone, we will no longer be able to generate nuclear power.

2)

Wind power pros and cons

    2. Cons

Coal power pros and cons

     1. Pros

     2. Cons

The balanced chemical equation for the reaction of ammonia hydroxide (NH4OH) producing ammonia (NH3) is:

NH4OH → NH3 + H2O

The equation shows that 1 mole of NH4OH produces 1 mole of NH3.

To determine the number of moles of NH3 produced from 7.50 g of NH4OH, we need to first calculate the molar mass of NH4OH:

NH4OH = 1 x 14.01 (atomic mass of N) + 4 x 1.01 (atomic mass of H) + 1 x 16.00 (atomic mass of O) = 35.05 g/mol

Next, we can use the following formula to calculate the number of moles:

moles = mass / molar mass

moles of NH4OH = 7.50 g / 35.05 g/mol = 0.214 mol

Since 1 mole of NH4OH produces 1 mole of NH3, the number of moles of NH3 produced is also 0.214 mol.

Therefore, 7.50 g of NH4OH produces 0.214 moles of NH3.

Weathering processes, both physical and chemical, break down rocks into smaller particles that mix with organic matter to form soil. Physical weathering, such as freeze-thaw cycles, root growth, and abrasion, mechanically break rocks into smaller fragments.

Chemical weathering, such as oxidation, dissolution, and hydrolysis, alters the mineral composition of rocks and releases nutrients for plant growth. The products of weathering, such as clay minerals and soluble salts, affect soil properties like texture, structure, porosity, and nutrient availability. Weathering also affects the pH of soil, which influences the solubility and availability of nutrients. Overall, weathering plays a critical role in soil formation and the availability of nutrients for plant growth.

To know more about Weathering processes, here

brainly.com/question/9621344

#SPJ1

--The complete Question is, How does the process of weathering, such as the physical and chemical breakdown of rocks, affect the composition and properties of soil?--

1. C) Molarity is indirectly related to volume.

2. A) The CaCl2 beaker has more ions in solution.

3. the molarity of the NaCl solution is 0.0513 M.

Step 1: Convert 30g of NaCl to moles.

The molar mass of NaCl is 58.44 g/mol. To convert 30 g to moles, divide by the molar mass:

30 g NaCl / 58.44 g/mol = 0.513 mol NaCl

Step 2: List Given and asking information.

Given:

Mass of NaCl = 30g

Volume of solution = 10.0L

Asking:

Molarity of the solution = ?

Step 3: set Molarity Formula and plug the mole/ Volume into the formula.

Molarity = moles of solute / volume of solution

Molarity = 0.513 mol / 10.0 L = 0.0513 M

Therefore, the molarity of the NaCl solution is 0.0513 M.

Learn more about molarity at

https://brainly.com/question/14469428

#SPJ1

The concentration of hydrogen peroxide in the original sample is 0.061 M.

Hydrogen is the first element on the periodic table. It is the lightest and most abundant element in the universe. Hydrogen is an odorless, colorless gas that is highly flammable. It is a nonmetal and has the atomic number of one. Hydrogen has a valence of one, meaning it can form one bond with other elements. Hydrogen is found in most compounds, either as a single atom or as part of a molecule. It is the main component of water and is also found in many organic compounds, such as carbohydrates and proteins. Hydrogen is used in many industries, including the production of ammonia for fertilizer, the production of methane for fuel, and the production of methanol for fuel and other products.

To learn more about hydrogen

https://brainly.com/question/24433860

#SPJ1

The number of moles of products based on the information given is 0.5 moles product.

It is given that each unshaded sphere represents an atom A and shaded represents B. If we look at the diagram, we have 8 unshaded doubly attached units and 4 unshaded doubly attached units on the left side which means we have 8 A2 molecules that react with 4 B2 molecules.

Whereas in the right-side diagram(which are products), 4 molecules have 4 unshaded and one shaded sphere, which means it is BA4 and 2 moles have two shaded spheres which mean it is B2. Hence, the number of moles of products based on the information given is 0.5 moles product.

Learn more about moles on

https://brainly.com/question/29367909

#SPJ1

The empirical formula for Epsom salts is MgSO₄, which means that for every one magnesium atom in the compound, there is one sulfur atom and four oxygen atoms.

To determine the empirical formula of Epsom salts we have to calculate the moles of each element in the sample:

Moles of magnesium = 1.01 g ÷ 24.31 g/mol = 0.0415 mol

Moles of sulfur = 1.33 g ÷ 32.06 g/mol = 0.0415 mol

Moles of oxygen = 2.66 g ÷ 16.00 g/mol = 0.1663 mol

Divide the number of moles of each element by the smallest number of moles:

0.0415 mol Mg ÷ 0.0415 mol = 1

0.0415 mol S ÷ 0.0415 mol = 1

0.1663 mol O ÷ 0.0415 mol = 4

If necessary, multiply each ratio by a whole number to get the smallest possible whole-number ratio:

1 : 1 : 4

This ratio is 1:1:4 for magnesium, sulfur, and oxygen respectively.

To learn more about empirical follow the link:

https://brainly.com/question/14044066

#SPJ1

Answer:

39.7%

Explanation:

The balanced chemical equation for the reaction is:

3CuO + 2NH3 → 3Cu + N2 + 3H2O

First, we need to calculate the theoretical yield of N2:

Molar mass of CuO = 79.55 g/mol

Molar mass of NH3 = 17.03 g/mol

Molar mass of N2 = 28.02 g/mol

Number of moles of CuO = 68.8 g / 79.55 g/mol = 0.865 mol

Number of moles of NH3 = 45.9 g / 17.03 g/mol = 2.695 mol

From the balanced equation, 3 moles of CuO react with 2 moles of NH3 to produce 1 mole of N2. Therefore, the number of moles of N2 produced should be:

(1 mol N2 / 3 mol CuO) x (0.865 mol CuO) x (2 mol NH3 / 3 mol CuO) = 0.383 mol N2

The theoretical yield of N2 is:

Theoretical yield = 0.383 mol x 28.02 g/mol = 10.73 g

The percent yield is:

Percent yield = (Actual yield / Theoretical yield) x 100%

Percent yield = (4.25 g / 10.73 g) x 100%

Percent yield = 39.7%

Therefore, the percent yield of the experiment is 39.7%.

Hope this helps!

Aluminum oxide has an 81.18% percent yield.

Aluminum and oxygen atoms combine to form the chemical compound known as aluminum oxide, commonly known as alumina, with the formula Al2O3. Corundum, emery, and bauxite are a few examples of the minerals that naturally contain it and are utilized extensively in industrial and commercial applications.

The actual yield must be divided by the theoretical yield, then multiplied by 100% to determine the percent yield.

The formula for percent yield is as follows:

(actual yield / theoretical yield) x 100%= Percentage yield

When we enter the supplied values, we obtain:

percent yield = (1.38 mol/1.70 mol) x 100% percent yield : 0.8118 x 100%  

Percentage yield : 81.18%

As a result, aluminum oxide has an 81.18% percent yield.

To know more about aluminum oxide, visit:

brainly.com/question/25869623

#SPJ1

This acid is known as sulfurous acid, as it's the conjugate base for base HSO3.

This compound is made up of three different elements: hydrogen, sulfur, & oxygen. According to the molecular formula, there are two hydrogen atoms, one sulfur atom, or three oxygen atoms. The sulfurous acid compound name is H2SO3 H 2 S O 3.

Sulfuric acid is a very corrosive chemical that, when concentrated, can be explosive. It can potentially cause skin burns, irritate the respiratory tract and make breathing difficult if inhaled, burn the eyes but instead possibly cause blindness if swallowed, and burn holes there in stomach if swallowed.

To know more about  sulfurous acid visiit :

https://brainly.com/question/29303579

#SPJ1

Answer:

403.2 grams of oxygen

Explanation:

According to the balanced chemical equation, 2C2H6 + 7O2 —> 4CO2 + 6H2O, 4 moles of carbon dioxide (CO2) are produced for every 7 moles of oxygen (O2) that react. Therefore, if 7.2 moles of carbon dioxide are produced, the number of moles of oxygen that react is (7.2 moles CO2) * (7 moles O2 / 4 moles CO2) = 12.6 moles O2.

Since the molar mass of oxygen is approximately 32 g/mol, the mass of oxygen that reacts is (12.6 moles O2) * (32 g/mol) = 403.2 g. Therefore, 403.2 grams of oxygen react in order to produce 7.2 moles of carbon dioxide.

The percent yield if you actually reacted 316.0 g of aluminum sulfide with 439.0 g of water to produce 125 g of aluminum hydroxide is 38.03%.

Percent yield refers to the percent ratio of actual yield to the theoretical yield. In chemistry, yield is a measure of the quantity of moles of a product formed in relation to the reactant consumed, obtained in a chemical reaction, usually expressed as a percentage. The amount of product actually made compared with the maximum calculated yield is called the percentage yield.

Given,

Mass of Aluminum sulfide = 316g

Mass of water = 439g

Moles of Aluminum sulfide = 316 / 150

= 2.107 moles

Al₂S₃ + 6H₂O = 2Al(OH)₃ + 3H₂S

From the reaction, 1 moles of aluminum sulfide gives 2 moles of aluminum hydroxide.

Thus, 2.107 moles will give 2.107 × 2 = 4.214 moles

mass of aluminum hydroxide = 4.214 × 78

= 328.7g

Actual yield = 125g

Percent yield = Actual yield × 100 ) ÷ Theoretical yield

= ( 125 × 100 ) ÷ 328.7

= 38.03%

Learn more about Percent yield, here:

https://brainly.com/question/17042787

#SPJ1

The overall dipole moments of the compounds have been shown in the image attached to this answer

The polarity of a chemical bond or molecule is determined by the dipole moment. It is a vector variable that denotes the division of a molecule's positive and negative charges along a specific axis.

The difference in electronegativity between the atoms in a bond is what causes the dipole moment to form. A measure of an atom's ability to draw electrons to itself is its electronegativity.

Learn more about dipole moment:https://brainly.com/question/14140953

#SPJ1

A. The balanced equation is: Zn + 2HCI -> ZnCl₂ + H₂

B. The mass of zinc chloride formed is 10.43 g

C. The volume of hydrogen gas produced is 1.68 L

First, we shall write the balanced equation for the reaction. This is given below:

Zn + 2HCI -> ZnCl₂ + H₂

Now, we shall determine the mass of zinc chloride, ZnCl₂ formed. Details below:

Zn + 2HCI -> ZnCl₂ + H₂

From the balanced equation above,

65.38 g of Zn reacted to produce 136.38 g of ZnCl₂

Therefore,

5 g of Zn will react to produce = (5 × 136.38) / 65.38 = 10.43 g of ZnCl₂

Thus, the mass of ZnCl₂ formed is 10.43 g

First, we shall obtain the mass of hydrogen gas produced. Details below:

Zn + 2HCI -> ZnCl₂ + H₂

From the balanced equation above,

65.38 g of Zn reacted to produce 2 g of H₂

Therefore,

5 g of Zn will react to produce = (5 × 2) / 65.38 = 0.15 g of H₂

Finally, we shall determine the volume of H₂ produced. Details below:

2 g of H₂ = 22.4 L

Therefore

0.15 g of H₂ = (0.15 g × 22.4 L) / 2 g

0.15 g of H₂ = 1.68 L

Thus, the volume of H₂ produced is 1.68 L

Learn more about mass produced:

https://brainly.com/question/9526265

#SPJ1

1017.5 Joules is the heat released when 25g water is condensed at 100 C.

When water is condensed, it changes from a gas to a liquid, releasing heat in the process. The amount of heat released can be calculated using the formula:

q = m * ΔH

where:

q = heat released (in Joules)

m = mass of water (in grams)

ΔH = heat of vaporization of water (in J/g)

The heat of vaporization of water at 100°C is 40.7 kJ/mol, or 40.7 J/g. Therefore, substituting the values in the formula, we get:

q = 25 g * 40.7 J/g

q = 1017.5 J

So the heat released when 25 g of water is condensed at 100°C is approximately 1017.5 Joules.

To learn more about vaporization problem at

https://brainly.com/question/14578189

https://brainly.com/question/26127294