A 300.0 mL sample of 0.100 M barium nitrate solution is mixed with 100.0 mL of 0.300 M sodium phosphate solution. A white precipitate results. a. What mass of solid is precipitated? b. What are the concentrations of all species still remaining in solution?

When sodium hydroxide, NaOH, is used to titrate a quantity of 0.4113 g of an unknown acid HA, the acid's molar mass is 138.7 g/mol if it reacts with 28.10 mL of 0.1055 M aqueous sodium hydroxide. That is option a.

To find the molar mass of the acid HA, we need to first calculate the number of moles of NaOH that reacted with the acid.

Number of moles of NaOH = concentration of NaOH x volume of NaOH used
                             = 0.1055 M x 0.02810 L
                             = 0.002967 mol

Since the acid and the base react in a 1:1 ratio, the number of moles of the acid HA is also 0.002967 mol.

Now we can use the mass and number of moles to calculate the molar mass of the acid.

The molar mass of HA = mass of HA/number of moles of HA
                         = 0.4113 g/0.002967 mol
                         = 138.7 g/mol

Therefore, the molar mass of the acid is 138.7 g/mol, which is option a.

Learn more about molar mass: https://brainly.com/question/837939

#SPJ11

The pH can be determined using the nitrous acid Ka expression before any NaOH is added: pH = pKa + log([HNO2]/[NO2-]). HNO2 is initially present at a concentration of 0.348 M without NaOH.

The moles of NaOH added after the addition of 18.0 mL of NaOH can be computed using the formula (0.348 M) x (0.018 L) = 0.00626 mol. The moles of HNO2 that have reacted are also 0.00626 mol since the reaction between HNO2 and NaOH is a 1:1 reaction. With respect to HNO2, the remaining moles are (0.348 mol) - (0.00626 mol) = 0.34174 mol. (74.5 mL + 18.0 mL) = 92.5 mL is the remaining capacity. pH is calculated using the Henderson-Hasselbalch equation, where [HNO2] is defined as 0.34174 mol/0.0925 L3.69 M and [NO2-] as 0.00626 mol/0.018 L0.348 M. So, pH is equal to 3.35 plus log(3.69/0.348) 3.98. Half of the original moles of HNO2 had interacted with NaOH at the point of half-equivalence. When the volume of additional NaOH supplied is equivalent to half the volume of the first solution of HNO2. HNO2 has a starting mole of (0.348 M) x (0.0745 L) = 0.02597 mol. This half has 0.012985 mol. 0.012985 mol of NaOH are also required to get to this point.

learn more about nitrous acid here:

https://brainly.com/question/17055219

#SPJ11

The composition of this copolymer at the end of the reaction would be F, -1 (almost pure monomer 2) (Option E).

Copolymers are formed from the combination of two or more monomers in varying proportions, and the composition of the copolymer depends on the ratio of the monomers in the feed. As the reaction proceeds, the concentration of each monomer in the feed changes, leading to a change in the composition of the copolymer. Therefore, it is difficult to predict the exact composition of the copolymer at the end of the reaction. However, if one of the monomers is present in a much higher concentration (i.e., close to pure) compared to the other, then the copolymer would be expected to have a composition close to that of the pure monomer. Hence, option (E) would be the most appropriate answer in this case.

Learn more about copolymer; https://brainly.com/question/15736390

#SPJ11

The functional group missing is alcohol. So, the answer is C.

When discussing molecules, it is important to consider their functional groups, which determine their properties and behaviors.

The four molecule groups that were mentioned in the question refer to carbons and hydrogens, which are known as alkanes, alkenes, alkynes, and cycloalkanes. However, there is a key functional group missing from this list.

The answer is (c) alcohol, which consists of an -OH group bonded to a carbon atom. Alcohols are important in many biological and industrial processes, and they can have varying degrees of solubility and reactivity depending on their structure.

Understanding the functional groups present in a molecule is crucial for predicting its behavior and interactions with other compounds, making it an essential concept in chemistry.

Learn more about molecule group at

https://brainly.com/question/18915679

#SPJ11

The iron rod absorbs 645.75 Joules of heat as it warms from -4°C to 37°C.

To calculate the amount of heat absorbed by the iron rod, we need to use the specific heat capacity of iron, which is 0.45 J/g°C.

First, we need to calculate the change in temperature:

ΔT = 37°C - (-4°C) = 41°C

Next, we can use the formula:

Q = m x c x ΔT

Where:
Q = heat absorbed (in Joules)
m = mass of the iron rod (in grams)
c = specific heat capacity of iron (in J/g°C)
ΔT = change in temperature (in °C)

Plugging in the values, we get:

Q = 35 g x 0.45 J/g°C x 41°C
Q = 645.75 J

Therefore, the iron rod absorbs 645.75 Joules of heat as it warms from -4°C to 37°C.

Learn more about heat capacity : brainly.com/question/28302909

#SPJ11

The relationship between the chemical potentials (µ) of species A in the liquid phase and the gas phase, with species B as a non-volatile solute, when the liquid phase of A is in equilibrium with the gas phase of is c. µ(A gas) = µ(A liquid).

The chemical potential of a species in a mixture is defined as the rate of change of free energy of a thermodynamic system with respect to the change in the number of atoms or molecules of the species that are added to the system. When the system is at equilibrium, the chemical potentials of species A in the liquid and gas phases are equal. So the correct answer is:c. µ(A gas) = µ(A liquid).

Learn more about chemical potentials energy : https://brainly.com/question/19291483

#SPJ11

To determine whether a soda can is chiral or achiral, we need to consider the following terms:

Chiral: An object is chiral if it cannot be superimposed on its mirror image. In other words, it has no plane of symmetry.

Achiral: An object is achiral if it can be superimposed on its mirror image, meaning it has a plane of symmetry.

A soda can is typically cylindrical with a top that is circular and symmetrical. If you were to create a mirror image of a soda can, you could superimpose the original can onto its mirror image. Therefore, a soda can would be achiral, as it has a plane of symmetry.

To know more about chiral and achiral:

https://brainly.com/question/30089747

#SPJ11

The concentration of OH⁻(aq) in a saturated solution of Ca(OH)₂(aq) is approximately 2.78 × 10⁻² M.

To find the concentration of OH⁻(aq) in a saturated solution of Ca(OH)₂(aq), we can set up an equation using the solubility product constant (Ksp) expression.

Ksp = [Ca²⁺][OH⁻]²

Since Ca(OH)2 dissociates into 1 Ca²⁺ and 2 OH⁻ ions, let the concentration of Ca²⁺ be x and the concentration of OH⁻ be 2x. Now we can substitute these values into the Ksp expression:

5.741 × 10⁻⁵ = [x][(2x)²]

Solve for x (which represents [Ca²⁺]):

x ≈ 1.39 × 10⁻² M

Now, find the concentration of OH⁻:

[OH⁻] = 2x ≈ 2(1.39 × 10⁻) = 2.78 × 10⁻² M

Therefore, in a saturated solution of Ca(OH)₂(aq), the concentration of OH⁻(aq) at 25°C is approximately 2.78 × 10⁻² M.

Learn more about solubility product constant (Ksp) here: https://brainly.com/question/29350479

#SPJ11

Therefore, it takes a cheetah approximately 0.37 seconds to run 10 meters at a speed of 60 miles per hour. The correct answer is a. 0.37 s.

To find out how many seconds it takes a cheetah to run 10 meters at a speed of 60 miles per hour, we'll need to do the following steps:

1. Convert the speed from miles per hour to meters per second.
2. Use the formula time = distance / speed to find the time it takes to run 10 meters.

Step 1: Convert the speed from miles per hour to meters per second:
60 miles per hour * 1.609 km/mi * 1000 m/km * (1/3600) hour/second = 26.8224 meters per second

Step 2: Use the formula time = distance / speed to find the time it takes to run 10 meters:
time = 10 meters / 26.8224 meters per second = 0.373 seconds

To know more about Speed:

https://brainly.com/question/19819936

#SPJ11

HNO3 (nitric acid) is a strong acid that can effectively dissociate in water to release H+ ions, which can then protonate any basic sites on the glassware surface that might interfere with the analysis.

Using HNO3 as a diluent ensures that any basic impurities on the glassware are neutralized, and thus minimize their potential to interfere with subsequent experiments. Additionally, using an acid as a diluent can help prevent microbial growth in the solution, as bacteria and other microorganisms are less likely to survive in acidic environments. which can then protonate any basic sites on the glassware surface that might interfere with the analysis.  the preparation of the stock solution, 0.01 M HNO3 is used as a diluent rather than deionized water.

Learn more about   HNO3  here:

https://brainly.com/question/4611635

#SPJ11

In the aldol reaction, an aldehyde or ketone reacts with another carbonyl compound, typically an enone, to form a β-hydroxy carbonyl compound.

The reaction involves the nucleophilic addition of the enolate ion (formed from the deprotonation of the α-hydrogen of the carbonyl compound) to the carbonyl group of the aldehyde or ketone.
To identify the aldehyde or ketone that can be prepared from an neon, you would need to work backward from the aldol product by:
1. Identifying the β-hydroxy carbonyl group in the neon.
2. Breaking the bond between the α- and β-carbons.
3. Adding back the carbonyl double bond and a proton to the α-carbon.
Since you don't have to consider stereochemistry or draw lone pairs, you only need to focus on the structure of the aldehyde or ketone.

learn more about stereochemistry Refer: https://brainly.com/question/28658912

#SPJ11

True. Tripolidine possesses two nitrogen atoms, but only one of them is available to function as a base. This is because the other nitrogen atom is involved in other chemical bonds, limiting its availability to act as a base.

Two nitrogen atoms are securely linked together to form the chemical molecule known as molecular nitrogen (N2). At normal temperatures generally pressures, molecular nitrogen is an odorless, colorless, tasteless, and inert gas. There are four ways that chemists may describe nitrogen compounds.An atom of nitrogen so shares three electrons alongside another atom of nitrogen. As a result, two nitrogen atoms create a triple bond.Nitrogen typically contains 3 bonds, but it may also have 4. If it does, it will be charged upwards. If the nitrogen molecule is negatively charged, nitrogen may potentially have two bonds.

learn more about nitrogen here

https://brainly.com/question/16711904

SPJ11

The 10.8 grams of nickel (II) sulfate must be dissolved in 288.0 g of water to raise the boiling point by 0.350 oC.

To solve this problem, we can use the following equation:

ΔTb = Kb x molality

where ΔTb is the boiling point elevation, Kb is the molal boiling point elevation constant for the solvent (water), and molality is the molal concentration of the solute (nickel(II) sulfate).

First, we need to calculate the molality of the solution:

molality = moles of solute / mass of solvent (in kg)

We can calculate the moles of solute using the following equation:

moles of solute = mass of solute / molar mass

Let's start by calculating the moles of nickel(II) sulfate:

moles of NiSO4 = mass of NiSO4 / molar mass of NiSO4

moles of NiSO4 = (molality x mass of solvent) / molar mass of NiSO4

Since we want to know how many grams of nickel(II) sulfate are needed, we can rearrange this equation to solve for mass of NiSO4:

mass of NiSO4 = (moles of NiSO4 x molar mass of NiSO4) / molality

mass of NiSO4 = (ΔTb / Kb) x (mass of solvent / molar mass of NiSO4)

Now we can plug in the values given in the problem:

ΔTb = 0.350 oC

Kb = 0.51 oC/m

mass of solvent = 288.0 g

molar mass of NiSO4 = 154.8 g/mol

mass of NiSO4 = (ΔTb / Kb) x (mass of solvent / molar mass of NiSO4)

mass of NiSO4 = (0.350 oC / 0.51 oC/m) x (288.0 g / 154.8 g/mol)

mass of NiSO4 = 10.8 g

Learn more about nickel.

brainly.com/question/15616649

#SPJ11

A)If 0.863 mole of [tex]NH_3[/tex] are produced, 0.4315 moles of [tex]N_2[/tex] must have reacted and B) If 0.863 mol [tex]NH_3[/tex] are produced, 1.2945 mole of [tex]H_2[/tex] must have reacted.

A) To determine the moles of [tex]N_2[/tex] that reacted, we can use the stoichiometric coefficients from the balanced chemical equation: [tex]N_2 (g) + 3 H_2 (g) --> 2 NH_3 (g)[/tex]
According to the balanced equation, 1 mol of [tex]N_2[/tex] reacts to produce 2 mol of  [tex]NH_3[/tex]. To find the moles of [tex]N_2[/tex] that reacted to produce 0.863 mol [tex]NH_3[/tex], we can set up a proportion:
(1 mol [tex]N_2[/tex] / 2 mol  [tex]NH_3[/tex]) = (x mol [tex]N_2[/tex] / 0.863 mol [tex]NH_3[/tex])
Solving for x:
x mol [tex]N_2[/tex] = (1 mol [tex]N_2[/tex] / 2 mol  [tex]NH_3[/tex]) * 0.863 mol  [tex]NH_3[/tex]
x mol [tex]N_2[/tex] = 0.4315 mol [tex]N_2[/tex]
So, 0.4315 mol [tex]N_2[/tex] must have reacted.
B) Now, to determine the moles of [tex]H_2[/tex] that reacted, we can use the stoichiometric coefficients again:
According to the balanced equation, 3 mol of [tex]H_2[/tex] reacts to produce 2 mol of  [tex]NH_3[/tex]. To find the moles of [tex]H_2[/tex] that reacted to produce 0.863 mol  [tex]NH_3[/tex], we can set up another proportion:
(3 mol [tex]H_2[/tex] / 2 mol  [tex]NH_3[/tex]) = (y mol [tex]H_2[/tex] / 0.863 mol  [tex]NH_3[/tex])
Solving for y:
y mol [tex]H_2[/tex] = (3 mol [tex]H_2[/tex] / 2 mol  [tex]NH_3[/tex]) * 0.863 mol  [tex]NH_3[/tex]
y mol [tex]H_2[/tex] = 1.2945 mol [tex]H_2[/tex]
So, 1.2945 mol [tex]H_2[/tex] must have reacted.

To learn more about moles click here https://brainly.com/question/26416088

#SPJ11

The mole fraction of N2 in the mixture is 0.982, and the mole fraction of Xe is 0.018.

To determine the mole fraction of each gas in the mixture of N2 and Xe, we need to use the ideal gas law equation: PV = nRT.

At STP, P = 1 atm and T = 273 K. The density of the mixture is 1.562 g/L, which can be converted to g/mL by dividing by 1000.

So, the density of the mixture is 0.001562 g/mL. We can use this value to calculate the molar concentration (M) of the mixture as follows:

M = density / molar mass

The molar mass of the mixture can be calculated as the weighted average of the molar masses of N2 and Xe, based on their mole fractions.

Let x be the mole fraction of N2 and (1-x) be the mole fraction of Xe. Then, the molar mass of the mixture is:

Mmixture = x*M(N2) + (1-x)*M(Xe)

where M(N2) = 28 g/mol and M(Xe) = 131.29 g/mol.

Substituting the values, we get:

0.001562 g/mL / Mmixture = x*28 g/mol + (1-x)*131.29 g/mol

Solving for x, we get:

x = 0.982

So, the mole fraction of N2 in the mixture is 0.982, and the mole fraction of Xe is 0.018.

Learn more about fraction here:

https://brainly.com/question/8482939

#SPJ11

When calcium oxalate is dissolved in water, the ions produced are: Ca²⁺ and C₂O₄²⁻.
So, the correct answer is:
d. Ca²⁺ + C₂O₄²⁻

Calcium oxalate is a salt (calcium salt) of oxalic acid. Certain foods are known to have high concentration of calcium oxalate and they are known to cause numbness and sores when ingested. The concentration of this calcium salt in fruits and vegetable can be reduced by boiling them. When CaC₂O₄ is dissolved in water, it dissociates to form two ions, namely, Ca²⁺ and C₂O₄²⁻.

Therefore, the correct answer is d: Ca²⁺ and C₂O₄²⁻.

To learn more about calcium oxalate visit: https://brainly.com/question/31385538

#SPJ11

There are 1.987 x 10²² atoms are present in 6.27g of F₂

To determine the number of atoms  in 6.27 g of F₂, we'll use the following steps:

1. Convert grams of F₂ to moles using the molar mass of F₂.
2. Determine the number of F atoms in a mole of F₂.
3. Calculate the total number of F atoms using Avogadro's number.

Step 1: The molar mass of F2 is 2 × 19 g/mol (since there are two F atoms, and each F atom has a molar mass of 19 g/mol). So, 6.27 g of F₂ × (1 mol F2 / 38 g F₂) = 0.165 moles of F₂.

Step 2: In one mole of F₂, there are two moles of F atoms (since each F₂ molecule contains two F atoms).

Step 3: Calculate the total number of F atoms using Avogadro's number. 0.165 moles of F × 2 moles of F atoms/mol F₂× (6.02 × 10²³ atoms/mol) = 1.987 × 10²³F atoms.

Since you want the non-exponential part of the value, the answer is 1.987 x 10²² atoms in 6.27 g of F₂.

To learn more about avogadro's number https://brainly.com/question/859564

#SPJ11

When a pure metal is mixed with another metal, the melting (freezing) temperature can change. This is because the mixture of the two metals creates an alloy, which can have different properties than the individual metals.

The region of the phase diagram that consists entirely of a single liquid phase is the liquid phase region. The region that consists of a single liquid phase and solid tin is the alpha phase region. The region that consists of a single liquid phase and solid bismuth is the beta phase region. The lowest melting temperature possible for any composition of bismuth and tin is the eutectic composition.

The best estimate for the composition that will give the lowest melting temperature is approximately 58% bismuth and 42% tin. When a eutectic composition is mixed with either one of the metal components, the melting (freezing) temperature remains the same. If a third metal were added to the composition, the melting (freezing) temperature could change depending on the properties of the third metal and its interaction with the other two metals in the alloy.

Overall, the melting (freezing) temperature of an alloy depends on the composition of the alloy and the properties of the individual metals that make it up.

For more about pure metal:

https://brainly.com/question/27736443

#SPJ11

There are multiple proteins that could be referred to as "XL αs," and the amino acid sequence would depend on the specific protein in question.

What is Amino Acid?

Amino acids are organic compounds that serve as the building blocks of proteins. They contain both amino (-NH2) and carboxyl (-COOH) functional groups, as well as a unique side chain group that determines the chemical and physical properties of each amino acid. There are 20 different types of amino acids commonly found in proteins, each with a different side chain.

Proteins are composed of amino acids that are linked together through peptide bonds to form a polypeptide chain. The sequence of amino acids in a protein determines its overall structure and function.

Learn more about Amino Acid from the given link

https://brainly.com/question/14351754

#SPJ1

The hydronium ion concentration (H3O+) is approximately 2.96 x 10^-13 M, and the hydroxide ion concentration (OH-) is 0.0338 M for the given NaOH solution.

To calculate the hydronium ion (H3O+) and hydroxide ion (OH-) concentrations for a 0.0338 M NaOH solution, we can use the fact that NaOH is a strong base and completely dissociates in water according to the following equation:
NaOH + H2O → Na+ + OH-
This means that for every mole of NaOH added to water, we get one mole of hydroxide ions. Therefore, the hydroxide ion concentration for a 0.0338 M NaOH solution would be:
[OH-] = 0.0338 M
Since water also dissociates to some extent, we can use the fact that Kw (the ion product constant for water) is equal to [H3O+][OH-] = 1.0 x 10^-14 at 25°C. This allows us to calculate the hydronium ion concentration as follows:
[H3O+] = Kw/[OH-] = (1.0 x 10^-14)/0.0338 M
[H3O+] = 2.96 x 10^-13 M
Therefore, the hydronium ion concentration for a 0.0338 M NaOH solution is 2.96 x 10^-13 M, and the hydroxide ion concentration is 0.0338 M.
To calculate the hydronium ion (H3O+) and hydroxide ion (OH-) concentrations for a 0.0338 M NaOH solution, we first need to recognize that NaOH is a strong base that dissociates completely in water. The dissociation equation for NaOH is:
NaOH → Na+ + OH-
Since the concentration of NaOH is 0.0338 M, the concentration of OH- will also be 0.0338 M, as they are produced in a 1:1 ratio. Now, to find the H3O+ concentration, we will use the ion product of water (Kw):
Kw = [H3O+] × [OH-] = 1.0 x 10^-14
We can rearrange the equation to solve for [H3O+]:
[H3O+] = Kw / [OH-]
Substitute the values:
[H3O+] = (1.0 x 10^-14) / 0.0338
[H3O+] ≈ 2.96 x 10^-13 M
So, the hydronium ion concentration (H3O+) is approximately 2.96 x 10^-13 M, and the hydroxide ion concentration (OH-) is 0.0338 M for the given NaOH solution.

To learn more about concentration, click here:

brainly.com/question/10725862

#SPJ11

The hydronium ion concentration (H3O+) is approximately 2.96 x 10^-13 M, and the hydroxide ion concentration (OH-) is 0.0338 M for the given NaOH solution.

To calculate the hydronium ion (H3O+) and hydroxide ion (OH-) concentrations for a 0.0338 M NaOH solution, we can use the fact that NaOH is a strong base and completely dissociates in water according to the following equation:
NaOH + H2O → Na+ + OH-
This means that for every mole of NaOH added to water, we get one mole of hydroxide ions. Therefore, the hydroxide ion concentration for a 0.0338 M NaOH solution would be:
[OH-] = 0.0338 M
Since water also dissociates to some extent, we can use the fact that Kw (the ion product constant for water) is equal to [H3O+][OH-] = 1.0 x 10^-14 at 25°C. This allows us to calculate the hydronium ion concentration as follows:
[H3O+] = Kw/[OH-] = (1.0 x 10^-14)/0.0338 M
[H3O+] = 2.96 x 10^-13 M
Therefore, the hydronium ion concentration for a 0.0338 M NaOH solution is 2.96 x 10^-13 M, and the hydroxide ion concentration is 0.0338 M.
To calculate the hydronium ion (H3O+) and hydroxide ion (OH-) concentrations for a 0.0338 M NaOH solution, we first need to recognize that NaOH is a strong base that dissociates completely in water. The dissociation equation for NaOH is:
NaOH → Na+ + OH-
Since the concentration of NaOH is 0.0338 M, the concentration of OH- will also be 0.0338 M, as they are produced in a 1:1 ratio. Now, to find the H3O+ concentration, we will use the ion product of water (Kw):
Kw = [H3O+] × [OH-] = 1.0 x 10^-14
We can rearrange the equation to solve for [H3O+]:
[H3O+] = Kw / [OH-]
Substitute the values:
[H3O+] = (1.0 x 10^-14) / 0.0338
[H3O+] ≈ 2.96 x 10^-13 M
So, the hydronium ion concentration (H3O+) is approximately 2.96 x 10^-13 M, and the hydroxide ion concentration (OH-) is 0.0338 M for the given NaOH solution.

To learn more about concentration, click here:

brainly.com/question/10725862

#SPJ11

No, The equilibrium pressure of H2 would be 3x, rounded to 1 significant digit.

the equilibrium pressure of H2 cannot be predicted using only the given data. Additional information about the initial concentrations of the reactants and/or the reaction conditions (such as volume or temperature changes) would be needed to calculate the equilibrium pressure of H2.
It seems like the chemical equation you provided has some typos. Based on the given information, I believe you meant the following equilibrium reaction:

CH4(g) ⇌ 3 H2(g) + C2H2(g)

You mentioned that the chemist fills a reaction vessel with 10 atm of methane gas (CH4) at a certain temperature and has an equilibrium constant Kp = 1.0 x 10^4.

To predict the equilibrium pressure of H2, we can set up an ICE (Initial, Change, Equilibrium) table to analyze the changes in pressure for each substance involved in the equilibrium reaction:

              CH4       3 H2         C2H2
Initial:       10.0      0             0
Change:       -x        +3x          +x
Equilibrium:  10.0-x    3x            x

Kp = (P_H2^3 * P_C2H2) / P_CH4^1

1.0 x 10^4 = ((3x)^3 * x) / (10.0 - x)

Unfortunately, this equation requires solving for x, which might not be possible using only ALEKS tools. However, you could potentially solve it using other mathematical tools or software.

If you were able to solve for x, the equilibrium pressure of H2 would be 3x, rounded to 1 significant digit.

To know more about equilibrium pressure click here:

brainly.com/question/17049019

#SPJ11

Reducing the intensity of light striking the pond's surface by 65% due to leaves growing on the elm tree in the spotted neck otter exhibit is likely to decrease the temperature of the exhibit water.

Other factors that can affect the temperature of exhibit water in a zoo include the ambient temperature, the water flow rate, and the presence of shade or cover over the exhibit.

Changes in exhibit water temperature can affect animal behavior and health by impacting their thermoregulation, metabolism, immune system, and stress levels. Extreme temperatures can also lead to heat or cold stress, dehydration, and other health problems.

Learn more about temperature here:

https://brainly.com/question/31055263

#SPJ1

The balanced chemical equation for the reaction between iron (Fe) and nitrogen (N) to form iron nitride (Fe2N) is: 6 Fe + N2 → 2 Fe2N

This equation is balanced because there are equal numbers of atoms of each element on both sides of the arrow, and the ratio of the reactants and products is 6:1 for Fe and N2, and 2:1 for Fe2N.

To balance the equation, we need to make sure that the number of atoms of each element is the same on both sides of the equation. Here's how we can do it:

On the LHS, we have 6 atoms of Fe and 2 atoms of N (since N2 consists of 2 nitrogen atoms bonded together).

On the RHS, we have 4 atoms of Fe (2 atoms in each Fe2N molecule) and 2 atoms of N (1 atom in each Fe2N molecule).

To balance the equation, we can multiply the reactants by 3 to get 6 Fe atoms and 6 N atoms:

6 Fe + 3 N2 → 2 Fe2N

Learn more about balanced reaction here: https://brainly.com/question/26694427

#SPJ1

Matter exists in three different physical states, namely solid, liquid and gaseous states. The three states of matter mainly differ in the arrangement of particles and the force of attraction among the constituent particles.

It has been observed that the matter exists in nature in different forms. Some substances are rigid and have a fixed shape, some substances can flow and can take the shape of the container whereas some other forms do not have any shape or size.

Here A represents Liquid to solid change, B represents Gas to liquid change and C represents Solid to gas change.

To know more about states of matter, visit;

https://brainly.com/question/9402776

#SPJ1

The angular speed of the stone is 3π rad/s (since 15 revolutions = 30π radians, and it takes 10 seconds to complete those revolutions). The linear speed of the stone is 90π/10 ft/s = 9π ft/s (since the distance traveled by the stone in 10 seconds is 90π feet).

In this problem, we are asked to find the angular and linear velocities of a stone that is being rotated in a sling. We are given that the sling is 3 feet long and that the stone completes 15 revolutions in 10 seconds. To find the angular velocity, we use the formula: angular speed = change in angle/time. Since the stone completes 15 revolutions, the change in angle is 152pi radians. Dividing by time, we get an angular speed of 3*pi radians per second.

To find the linear velocity, we need to find the distance traveled by the stone in 10 seconds. Since the sling is 3 feet long, the stone travels a distance of 2pi3 feet for every revolution. Multiplying by the number of revolutions in 10 seconds, we get a distance of 90 pi feet. Dividing by the time, we get a linear velocity of 9pi feet per second.

Therefore, the angular velocity of the stone is 3pi radians per second and the linear velocity is 9pi feet per second.

learn more about velocities here:

https://brainly.com/question/28710636

#SPJ11

a. In a 1.0 M ammonia solution, the species present are NH₃, NH₄⁺, OH⁻, and H₂O.

b. The pH of the ammonia solution is basic .

c. When a 1.0 M ammonia solution is added to a Cu²⁺ solution, the following reactions may occur: Cu²⁺ + 4NH₃ ⇌ [Cu(NH₃)₄]²⁺ and NH₃ + H₂O ⇌ NH₄⁺ + OH⁻.

d. If a solid precipitate is formed when 1.0 M ammonia is added to Cu²⁺, it indicates the formation of a Cu(OH)₂precipitate.

e. The addition of 15.0 M ammonia to the solution and precipitate from part d. dissolves the precipitate

a) The solution that are present in ammonia solution are NH₃, NH₄⁺, OH⁻, and H₂O which formed after dissociation and combination reactions.

b) Because ammonia is a weak base and its dissociation in water produces OH- ions, which increase the pH.

c)  The first reaction forms a complex ion and the second reaction contributes to the basicity of the solution.

d) This occurs because the addition of ammonia to the Cu²⁺ solution increases the OH- concentration, leading to the precipitation of Cu(OH)₂.

e) Because the excess ammonia shifts the equilibrium towards the formation of the Cu(NH₃)₄²⁺ complex ion, which is soluble in water. The 1.0 M ammonia solution was not enough to dissolve the precipitate because the equilibrium was not shifted enough towards the complex ion formation.

To know more about complex ion click on below link:

https://brainly.com/question/31418041#

#SPJ11

When solid sodium nitrite is put into water, it dissolves and dissociates into its ions. The balanced chemical equation for the reaction is:
[tex]NaNO_{2}  (s) + H_{2} O (l) = Na+ (aq) + NO_{2}^{-}  (aq) +  H_{2} O (l)[/tex]

In this equation, [tex]  NaNO_{2}[/tex]    is the solid compound in its solid state, and [tex]  H_{2} O [/tex]   is the water in its liquid state. [tex]Na^{+}[/tex]  and [tex]  NO_{2}^{-}[/tex]     are the ions that are formed when sodium nitrite dissolves in water, and they are in the aqueous state as they are dissolved in water. Since sodium nitrite fully dissociates in water, it is considered a strong electrolyte.

To know more about an electrolyte:

https://brainly.com/question/29771118

#SPJ11

The maximum resulting tenacity of a cotton fiber after wet conditioning can be calculated using the following formula:

Maximum resulting tenacity = Dry tenacity / (1 + moisture regain)

Moisture regain is the amount of moisture absorbed by the fiber when it is fully saturated. For cotton, the moisture regain is around 8.5%.

Therefore, using the given dry tenacity of 5 g/den and a moisture regain of 8.5%, we can calculate the maximum resulting tenacity as:

Maximum resulting tenacity = 5 / (1 + 0.085) = 4.58 g/den

Therefore, the closest option to this answer is (a) 3.55 g/den.
After wet conditioning, a cotton fiber's tenacity usually increases. Given that the dry tenacity is 5 g/den, the maximum resulting tenacity, in g/den, that this fiber would achieve is: c. 6.20 g/den.

Visit here to learn more about tenacity brainly.com/question/30672991

#SPJ11

Answer:

This is the combined gas law formula:

(P1V1)/(T1) = (P2V2)/(T2)

where P1 = 688 torr, V1 = 393 ml, T1 = 45°C + 273.15 = 318.15 K, P2 = unknown, V2 = 491 ml, and T2 = 62°C + 273.15 = 335.15 K.

Solving for P2:

P2 = (P1V1T2)/(V2T1)

= (688 torr * 393 ml * 335.15 K) / (491 ml * 318.15 K)

= 821.38 torr

Therefore, the air will exert a pressure of 821.38 torrs when expanded to 491 ml at 62°C.

The density of O₂ gas under these conditions is 1.16 g/L.

To calculate the density of O₂ gas, we'll use the formula:

density = (mass of O₂) / volume

1. First, find the mass of O₂ by multiplying the moles (0.278 mol) by its molar mass (32 g/mol):
mass = 0.278 mol * 32 g/mol = 8.896 g

2. Next, divide the mass of O₂ (8.896 g) by the volume of the flask (8.00 L):
density = 8.896 g / 8.00 L = 1.112 g/L

However, since the gas is at room temperature and pressure, we need to account for the ideal gas law (PV=nRT) to adjust the density for these conditions. Assuming the room temperature is 298 K and the pressure is 1 atm, we can calculate the adjusted density:

3. Use the ideal gas law to find the volume of O₂ at room temperature and pressure:
PV = nRT
(1 atm) * V = (0.278 mol) * (0.0821 L atm/mol K) * (298 K)
V = 6.796 L

4. Divide the mass of O₂ (8.896 g) by the adjusted volume (6.796 L) to find the density:
density = 8.896 g / 6.796 L = 1.16 g/L

To know more about ideal gas law click on below link:

https://brainly.com/question/28257995#

#SPJ11