The time required for light to travel vertically from the surface of the ice to the bottom of the pond is approximately 0.0024 seconds.
To calculate this, we first need to find the distance the light has to travel through the ice and water. This can be found by subtracting the thickness of the ice from the total depth of the pond:
distance = total depth - thickness of ice
distance = 2.60 m - 0.36 m
distance = 2.24 m
Next, we can use the formula for the speed of light in a vacuum (c) and the index of refraction of water (n) to calculate the speed of light in water (v):
v = c/n
v = 3.00 x 10⁸ m/s / 1.33
v = 2.26 x 10⁸ m/s
Finally, we can divide the distance by the speed of light in water to find the time required for light to travel from the surface of the ice to the bottom of the pond:
time = distance / speed
time = 2.24 m / 2.26 x 10⁸ m/s
time = 0.0024 seconds
Therefore, it would take approximately 0.0024 seconds for light to travel vertically from the surface of the ice to the bottom of the pond.
To know more about speed of light click on below link:
https://brainly.com/question/1555553#
#SPJ11
you buy a gold crown at a flea market. when you get home, you use your physics knowledge to check whether the crown is pure gold. you hang it form a scale and find its weigh to be 7.84 N. them you weigh the crown when it is completely in water, now the scale reads 6.84 N. The density of gold is 19300 kgm^-3. density of water is 1000kgm^-3. what is the buoyant force on the crown?
To determine the buoyant force on the crown, we can use the principle of buoyancy, which states that the buoyant force on an object immersed in a fluid is equal to the weight of the fluid displaced by the object.
First, we need to calculate the volume of the crown. We can use the fact that the density of gold is 19300 kg/m^3, and the weight of the crown is 7.84 N, to find the volume of the crown:
Density = Mass/Volume
Volume = Mass/Density
Volume = 7.84 N / (19300 kg/m^3)
Volume = 4.06 x 10^-4 m^3
Next, we need to determine the weight of the water displaced by the crown when it is submerged in water. We can use the fact that the weight of the crown in water is 6.84 N, to find the weight of the water displaced by the crown:
Weight of water displaced = Weight of crown - Weight of crown in water
Weight of water displaced = 7.84 N - 6.84 N
Weight of water displaced = 1 N
Since the density of water is 1000 kg/m^3, we can use the weight of the water displaced to find the volume of water displaced:
Density = Mass/Volume
Volume = Mass/Density
Volume = 1 N / (1000 kg/m^3)
Volume = 1 x 10^-3 m^3
Since the volume of water displaced is equal to the volume of the crown, we can conclude that the crown is made of pure gold, since its density is the same as that of gold.
Therefore, the buoyant force on the crown is equal to the weight of the water displaced, which is 1 N.
To know more about buoyant force :
https://brainly.com/question/21990136
#SPJ11
A hobbyist builds a circuit in which an AC power supply with an rms voltage of 115 V is connected to a 1.86 kΩ resistor. (a) What is the maximum potential difference across the resistor (in V)? ____ V
(b) What is the maximum current through the resistor (in A)? ___ A (c) What is the rms current through the resistor (in A)? ___ A (d) What is the average power dissipated by the resistor (in W)? ____ W
If the RMS voltage across the 1.86 kΩ resistor is 115 V then:
(a) The potential difference across the resistor is 162.6 V.
(b) The maximum current through the resistor is 0.087 A.
(c) The RMS current through the resistor is 0.062 A.
(d) The average power dissipated by the resistor is 7.13 W.
(a) The maximum potential difference across the resistor can be found using the formula Vmax = Vrms x √2, where Vrms is the RMS voltage.
Plugging in the values, we get Vmax = 115 x √2 = 162.6 V.
Therefore, the maximum potential difference across the resistor is 162.6 V.
(b) The maximum current through the resistor can be found using Ohm's Law, which states that I = V/R, where V is the potential difference and R is the resistance.
Plugging in the values, we get I = 162.6/1860 = 0.087 A.
Therefore, the maximum current through the resistor is 0.087 A.
(c) The RMS current through the resistor is equal to the maximum current divided by √2.
Therefore, Irms = 0.087/√2 = 0.062 A.
(d) The average power dissipated by the resistor can be found using the formula Pavg = Vrms x Irms x cos(θ), where cos(θ) is the power factor.
For a purely resistive circuit like this one, the power factor is 1.
Plugging in the values, we get Pavg = 115 x 0.062 x 1 = 7.13 W.
Therefore, the average power dissipated by the resistor is 7.13 W.
Learn more about RMS voltage:
https://brainly.com/question/31389253
#SPJ11
Find the tension in an elevator cable if the 1,000kg elevator is descending with an acceleration of 1.8 m/s2, downward.a. 16,000 Nb. 8,000 Nc. 12,000 Nd. 20,000 N
The tension in the elevator cable if the 1,000kg elevator is descending with an acceleration of 1.8 m/s2, downward is 8,000 N. The correct option is b.
To find the tension in the elevator cable, we need to use the formula: Tension (T) = m(g - a), where m is the mass of the elevator (1,000 kg), g is the acceleration due to gravity (9.8 m/s²), and a is the acceleration of the descending elevator (1.8 m/s²).
T = 1,000 kg * (9.8 m/s² - 1.8 m/s²)
T = 1,000 kg * 8 m/s²
T = 8,000 N
Therefore, the tension in the elevator cable is 8,000 N (option b).
For more such questions on Tension.
https://brainly.com/question/18649440#
#SPJ11
A series of small machine components being moved by a conveyor belt pass over a 120-mm-radius idler pulley. At the instant shown, the velocity of point A is 300 mm/s to the left and its acceleration is 180 mm/s^2 to the right. Determine (a) the angular velocity and angular acceleration of the idler pulley, (b) the total acceleration of the machine component at B.
(a) The angular velocity is 2.5 rad/s and angular acceleration is 1.5 rad/s²
(b) The total acceleration of the machine component at B is 360 mm/s² to the right.
(a) To find the angular velocity of the idler pulley, we can use the formula:
ω = v / r
where v is the velocity of point A and r is the radius of the pulley. Thus, we have:
ω = 300 mm/s / 120 mm = 2.5 rad/s
To find the angular acceleration of the pulley, we can use the formula:
α = a / r
where a is the acceleration of point A and r is the radius of the pulley. Thus, we have:
α = 180 mm/s² / 120 mm = 1.5 rad/s²
(b) To find the total acceleration of the machine component at B, we can use the formula:
aB = aA + α × r
where aA is the acceleration of point A and α is the angular acceleration of the pulley. We know that aA = 180 mm/s² to the right, and from part (a) we found that α = 1.5 rad/s². The radius of the pulley is 120 mm. Thus, we have:
aB = 180 mm/s² + (1.5 rad/s²) × 120 mm
aB = 360 mm/s² to the right
To know more about angular acceleration click on below link:
https://brainly.com/question/29428475#
#SPJ11
by what percentage is the maximum range of a 0.850 kgkg ball reduced if fwindfwindf_wind == 0.900 nn ? express your answer as a percentage. view available hint(s)
the maximum range of the 0.850 kg ball is reduced by approximately 10.8% due to the 0.900 N wind force.we need to find the percentage by which the maximum range of the 0.850 kg ball is reduced due to the 0.900 N wind force.
Step 1: Calculate the force due to gravity acting on the ball
Force = mass × acceleration due to gravity
F_gravity = 0.850 kg × 9.81 m/s²
F_gravity = 8.3385 N
Step 2: Calculate the net force acting on the ball
Net force = F_gravity - F_wind
Net force = 8.3385 N - 0.900 N
Net force = 7.4385 N
Step 3: Calculate the percentage reduction in force
Percentage reduction = [(F_gravity - Net force) / F_gravity] × 100
Percentage reduction = [(8.3385 N - 7.4385 N) / 8.3385 N] × 100
Percentage reduction ≈ (0.9 N / 8.3385 N) × 100
Percentage reduction ≈ 10.8%
So, the maximum range of the 0.850 kg ball is reduced by approximately 10.8% due to the 0.900 N wind force.
Learn more about force here
https://brainly.com/question/3160109
#SPJ11
Solved Least Mass Problem A regular hexagon pivoted
The equilateral triangle will come to rest in a stable equilibrium position when released from the initial position. The square has the smallest moment of inertia about the pivot point.
This is because the center of mass of the equilateral triangle is directly above the pivot point, while for the square and hexagon, the center of mass is off to one side. To determine which shape has the smallest moment of inertia about the pivot point, we can use the formula for the moment of inertia of a polygon about its centroid:
I = (n/12) * s² * h² * (1 + cos(2*pi/n))
where n is the number of sides, s is the length of each side, and h is the distance from the centroid to a side. For a regular polygon, the centroid is also the center of mass, so we can use the side length as the distance from the pivot point.
Plugging in the values for each shape,
Square: I = (4/12) * 1² * (1/2)² * (1 + cos(pi/2)) = 1/12
Hexagon: I = (6/12) * 2² * (√(3)/2)² * (1 + cos(pi/3)) = 2√(3)/3
Equilateral triangle: I = (3/12) * 3² * (√(3)/3)² * (1 + cos(2*pi/3)) = 9sqrt(3)/4
To know more about square, here
brainly.com/question/28776767
#SPJ4
--The complete question is, A square, a regular hexagon, and an equilateral triangle are pivoted about one of their vertices such that they can freely rotate in the plane. The sides of the shapes have lengths 1, 2, and 3 units, respectively. Which shape will come to rest in a stable equilibrium position when released from the initial position? Which shape has the smallest moment of inertia about the pivot point?--
In Eq. (5), show that vpi = Ro √g/2h Why was R0 used to calculate this velocity?
this is the equation (5) its refering to in question number 3
po = mp vpi
po = mp (Ro/t)
R0 is used to calculate this velocity because it represents a distance related to the particle's motion. By incorporating it into the equation, we can determine the initial velocity (vpi) based on the distance (Ro) and the height (h) under the influence of gravity (g).
In the given equation, po represents the force exerted on the fluid by the piston, mp represents the mass of the piston and vpi represents the velocity of the piston.
To calculate vpi, we can rearrange the equation as:
vpi = po/mp
We know that the force exerted on the fluid by the piston is equal to the weight of the column of fluid above it. Therefore, we can substitute po with ρghA, where ρ is the density of the fluid, g is the acceleration due to gravity, h is the height of the fluid column above the piston and A is the cross-sectional area of the piston.
vpi = (ρghA)/mp
We can simplify this equation further by substituting A with πR0^2, where R0 is the radius of the piston.
vpi = (ρghπR0^2)/mp
Now, we can substitute mp with ρπR0^2t, where t is the thickness of the piston.
vpi = (ρghπR0^2)/(ρπR0^2t)
Simplifying further, we get:
vpi = gh/2t
Finally, we can substitute t with R0/2 to get:
vpi = Ro√g/2h
Therefore, R0 was used in the calculation of vpi because it is the radius of the piston, which determines the cross-sectional area of the piston and hence the force exerted on the fluid.
Learn more about velocity here:
https://brainly.com/question/17127206
#SPJ11
If the elements in two arrays are related by their subscripts, the arrays are called arrays.
a. associated
b. coupled
c. dynamic
d. parallel
If the elements in two arrays are related by their subscripts, the arrays are called : d. parallel
A collection of parallel arrays, commonly referred to as a structure of arrays (SoA), is a type of implicit data structure used in computing to represent a single array of records using many arrays. Each field of the record is maintained as a distinct, homogenous data array with an equal amount of items.
In parallel arrays, a collection of data is represented by two or more arrays, where each corresponding array index represents a field that matches a particular record. The array items at names[2] and ages[2] would describe the name and age of the third individual, for instance, if there were two arrays, one for names and the other for ages. The elements in two arrays are related by their subscripts.
To know more about arrays visit https://brainly.com/question/30757831
#SPJ11
a mixture of 10.0 g of ne and 10.0 g ar have a total pressure of 1.60 atm. what is the partial pressure of ar? 1.07 atm 0.400 atm 0.537 atm 0.800 atm 1.32 atm
The partial pressure of Ar in the mixture is 0.537 atm.
To find the partial pressure of Ar in a mixture of 10.0 g of Ne and 10.0 g Ar with a total pressure of 1.60 atm, you can use Dalton's Law of Partial Pressures.
Here are the steps:
1. Calculate the moles of each gas using their molar masses (Ne: 20.18 g/mol, Ar: 39.95 g/mol):
Moles of Ne = 10.0 g / 20.18 g/mol = 0.495 moles
Moles of Ar = 10.0 g / 39.95 g/mol = 0.250 moles
2. Calculate the mole fractions of each gas:
Mole fraction of Ne = moles of Ne / (moles of Ne + moles of Ar) = 0.495 / (0.495 + 0.250) = 0.664
Mole fraction of Ar = moles of Ar / (moles of Ne + moles of Ar) = 0.250 / (0.495 + 0.250) = 0.336
3. Use Dalton's Law to find the partial pressure of Ar:
Partial pressure of Ar = mole fraction of Ar * total pressure = 0.336 * 1.60 atm = 0.537 atm
Learn more about pressure:
https://brainly.com/question/28012687
#SPJ11
the intensity of the sun on a cloudy day is i = 300 w/m2, a) what is the electric field strength of the em wave? b) what is the magnetic field strength of the em wave?
Therefore, the magnetic field strength of the EM wave is [tex]3.54 * 10^{-8}[/tex] T.
a) The electric field strength of the electromagnetic (EM) wave, we can use the equation:
I = [tex]ce_oE^2/2[/tex]
Here I is the intensity, c is the speed of light, ε0 is the permittivity of free space, and E is the electric field strength.
Rearranging this equation to solve for E, we get:
E = [tex]\sqrt{(2I/(ce_0))}[/tex]
Substituting the given values, we get:
E = [tex]\sqrt{(2 * 300 / (3 * 10^8 * 8.85 * 10^{-12}))}[/tex] = 102.6 V/m
Therefore, the electric field strength of the EM wave is 102.6 V/m.
b) The magnetic field strength of the EM wave, we can use the equation:
B = [tex]\sqrt{(u_0e_0)E}[/tex]
Here B is the magnetic field strength, μ0 is the permeability of free space, and E is the electric field strength.
Substituting the given values, we get:
B = [tex]\sqrt{4 * pi * 10^{-7} * 8.85 * 10^{-12)} * 102.6 }[/tex]
= [tex]3.54 x 10^{-8[/tex] T
Learn more about magnetic field visit: brainly.com/question/14411049
#SPJ4
A 3.53 k-Ohm resistor is connected to a generator with a maximum voltage of 121V. Find the average power delivered to this circuit. Find the maximum power delivered to this circuit.
The average power delivered to the circuit is 4.12 W.
The maximum power delivered to the circuit is 4.13 W.
To find the average power delivered to the circuit, we can use the formula P = V^2/R, where P is power, V is voltage, and R is resistance (in Ohms).
Using the given values, we have:
P = \farc{(121V)^{2}{ 3.53 k-Ohm }
P = 4,119 mW or 4.12 W (rounded to two decimal places)
Therefore, the average power delivered to the circuit is 4.12 W.
To find the maximum power delivered to the circuit, we know that it occurs when the resistance is equal to the generator's internal resistance (which we don't know). However, we can use the formula P = V^2 / (4R), where R is the total resistance in the circuit (the 3.53 k-Ohm resistor and the generator's internal resistance).
Assuming the internal resistance of the generator is negligible compared to the 3.53 k-Ohm resistor, we have:
R = 3.53 k-Ohm + 0 Ohm (generator internal resistance)
R = 3.53 k-Ohm
P = \frac{(121V)^{2 }{ (4 * 3.53 k-Ohm)}
P = 4,133 m W or 4.13 W (rounded to two decimal places)
learn more about resistance Refer: https://brainly.com/question/9605409
#SPJ11
Johnny, Susie, and Joe are working together to push a 65 kg filing cabinet across the floor to the right Johnny pushes with a force of 85 N, Susie pushes with a force of 85 N, and Joe pushes with a force of 50 N. The cabinet moves at a constant speed. what is closest to the weight of the filing cabinet
The weight of the filing cabinet is closest to 638 N.
How to solve for the weightSince the cabinet is moving at a constant speed, we know that the net force acting on it is zero (otherwise it would be accelerating).
Therefore, the force of friction acting on the cabinet must be equal in magnitude and opposite in direction to the total force applied by Johnny, Susie, and Joe.
The total force applied is:
85 N + 85 N + 50 N = 220 N
Therefore, the force of friction is also 220 N.
The weight of the cabinet can be calculated using the formula:
weight = mass x gravity
where mass is given as 65 kg and gravity is approximately 9.81 m/s^2.
weight = 65 kg x 9.81 m/s^2 = 637.65 N
So the weight of the filing cabinet is closest to 638 N.
Read more on weight here:https://brainly.com/question/25973294
#SPJ1
A ferry boat is sailing at 12 km 30 degrees W of N with respect to a river that is flowing at 6.0 km/h E. As observed from the shore, what direction is the ferry boat sailing?
The ferry boat is sailing in a direction of 0 degrees (due North) at a speed of 10.39 km/h. To determine the direction of the ferry boat as observed from the shore, we must consider both the ferry boat's velocity and the river's velocity. The ferry boat is sailing at 12 km/h 30 degrees W of N, and the river is flowing at 6.0 km/h E.
Step 1: Break the ferry boat's velocity into its components:
- Northward component: 12 km/h * cos(30°) = 10.39 km/h
- Westward component: 12 km/h * sin(30°) = 6 km/h
Step 2: Add the river's velocity to the ferry boat's components:
- Northward component: 10.39 km/h (unchanged)
- Eastward component: 6.0 km/h (from the river) - 6 km/h (from ferry boat) = 0 km/h
Step 3: Determine the resultant velocity's magnitude and direction:
- Magnitude: √(10.39^2 + 0^2) = 10.39 km/h
- Direction: tan^-1(0/10.39) = 0° (N).
To know more about ferry boat refer here:
https://brainly.com/question/30583317#
#SPJ11
A cart is moving on a horizontal track. A heavy bag falls off the cart and moves straight down relative to the cart. Describe what happens to the speed of the cart. Represent your answer with the impulse-momentum bar chart.
When a heavy bag falls off a moving cart on a horizontal track, the speed of the cart will be affected due to the conservation of linear momentum.
As the bag falls straight down, an equal and opposite impulse acts on the cart, causing it to increase in speed. In an impulse-momentum bar chart, the initial momentum (mass x initial velocity) of the cart-bag system is represented by a bar. After the bag falls, the final momentum is split into two separate bars: one for the cart and one for the bag. The cart's momentum bar will be larger than its initial momentum, indicating an increase in its speed, while the bag's momentum bar will represent its downward momentum. The sum of the final momentum bars will be equal to the initial momentum bar, conserving the total linear momentum of the system.
Learn more about momentum :
https://brainly.com/question/30677308
#SPJ11
When a heavy bag falls off a moving cart on a horizontal track, the speed of the cart will be affected due to the conservation of linear momentum.
As the bag falls straight down, an equal and opposite impulse acts on the cart, causing it to increase in speed. In an impulse-momentum bar chart, the initial momentum (mass x initial velocity) of the cart-bag system is represented by a bar. After the bag falls, the final momentum is split into two separate bars: one for the cart and one for the bag. The cart's momentum bar will be larger than its initial momentum, indicating an increase in its speed, while the bag's momentum bar will represent its downward momentum. The sum of the final momentum bars will be equal to the initial momentum bar, conserving the total linear momentum of the system.
Learn more about momentum :
https://brainly.com/question/30677308
#SPJ11
An interference pattern is produced by light with a wavelength 600 nm from a distant source incident on two identical parallel slits separated by a distance (between centers) of 0.490 mm .
Part A
If the slits are very narrow, what would be the angular position of the first-order, two-slit, interference maxima?
Part B
What would be the angular position of the second-order, two-slit, interference maxima in this case?
Part C
Let the slits have a width 0.330 mm . In terms of the intensity I0 at the center of the central maximum, what is the intensity at the angular position of ?1?
Part D
What is the intensity at the angular position of ?2?
The intensity at the angular position of the second minimum is equal to the intensity at the center of the central maximum (I0).
Part A:
The angular position of the first-order, two-slit, interference maxima can be found using the formula:
sinθ = mλ/d
where θ is the angular position of the maxima, m is the order of the maxima (m=1 for first-order maxima), λ is the wavelength of light, and d is the distance between the centers of the two slits.
Plugging in the given values, we get:
sinθ = (1)(600 nm)/(0.490 mm) = 0.244
θ = [tex]sin^(-1)( 0.244) = 14.1°[/tex]
Therefore, the angular position of the first-order, two-slit, interference maxima is 14.1°.
Part B:
The angular position of the second-order, two-slit, interference maxima can be found using the same formula as in Part A, but with m=2:
[tex]sinθ = (2)(600 nm)/(0.490 mm) = 0.488\\θ = sin^(-1)(0.488) = 29.0°[/tex]
Therefore, the angular position of the second-order, two-slit, interference maxima is 29.0°.
Part C:
The intensity of the interference pattern at the angular position of the first minimum (not the first maximum) is given by:
[tex]I = I0(cos(πw sinθ/λ)[/tex][tex])^2[/tex]
where I0 is the intensity at the center of the central maximum, w is the width of the slit, λ is the wavelength of light, and θ is the angular position of the minimum.
For the first minimum, m=1 and sinθ = λ/w. Plugging in the given values, we get:
sinθ = λ/w = 600 nm/0.330 mm = 0.182
[tex]I = I0(cos(πw sinθ/λ))^2 = I0(cos(π/2))^2 = I0(0) = 0[/tex]
Therefore, the intensity at the angular position of the first minimum is zero.
Part D:
The intensity of the interference pattern at the angular position of the second minimum is also given by the same formula as in Part C, but with m=2:
[tex]I = I0(cos(2πw sinθ/λ))[/tex][tex]^2[/tex]
For the second minimum, sinθ = 2λ/w. Plugging in the given values, we get:
[tex]sinθ = 2λ/w = 2(600 nm)/0.330 mm = 0.364\\I = I0(cos(2πw sinθ/λ))^2 = I0(cos(2π))^2 = I0(1)^2 = I0[/tex]
learn more abouT interference pattern here:
https://brainly.com/question/30217637
#SPJ4
A 62 kg sprinter, starting from rest, runs 51 m in 7.0 s at constant acceleration. What is the magnitude of the horizontal force acting on the sprinter? What is the sprinter's power output at 2.0 s, 4.0 s, and 6.0 s? Express your answers using two significant figures separated by commas.
The magnitude of the horizontal force acting on the sprinter is 76 N, and the sprinter's power output at 2.0 s, 4.0 s, and 6.0 s is 684 W, 342 W, and 228 W, respectively.
The first step is to find the sprinter's acceleration using the equation:
distance = (initial velocity x time) + (1/2 x acceleration x [tex]time^2[/tex])
Rearranging this equation gives us:
acceleration = 2 x (distance - initial velocity x time) / [tex]time^2[/tex])
Plugging in the given values, we get:
acceleration = 2 x (51 m - 0 m/s x 7.0 s) / [tex](7.0 s)^2[/tex] = [tex]1.22 m/s^2[/tex]
Next, we can use Newton's second law of motion, F = ma, to find the magnitude of the horizontal force acting on the sprinter:
force = mass x acceleration = 62 kg x [tex]1.22 m/s^2[/tex] = 76 N
To find the sprinter's power output at 2.0 s, 4.0 s, and 6.0 s, we can use the equation for power:
power = work/time
The work done by the sprinter is equal to the force exerted multiplied by the distance traveled, since the force and displacement are in the same direction. Therefore, we can use the equation:
work = force x distance
Plugging in the values, we get:
work = 76 N x (2 m + 4 m + 6 m) = 1368 J
Using the given times, we can calculate the power output at each time:
power at 2.0 s = work done in 2.0 s / 2.0 s = 684 J/s = 684 W
power at 4.0 s = work done in 4.0 s / 4.0 s = 342 J/s = 342 W
power at 6.0 s = work done in 6.0 s / 6.0 s = 228 J/s = 228 W
To know more about power output, refer to the link below:
https://brainly.com/question/31479681#
#SPJ11
Application 2 Consider an object (A) which moves in a uniform rectilinear motion in the negative direction of the x-axis. The speed of (A) is 15 m/s, and its initial abscissa is XoA 30 m. 1. a. Determine the time equation of the motion of (A). b. Draw the (V-1) graph of (A). 2. Another particle (B), whose time equation is XB = 101-70 (S.1), is moving on the same axis. We start timing for (A) and (B) simultaneously. a. Determine the instant at which (A) and (B) meet as well as the position at where they meet. b. Determine the distance separating (A) and (B) at t = 8 s. B- Acceleration rectilinear motion : ARM
1. For an object (A) moving uniformly in the negative direction of the x-axis with a speed of 15 m/s and initial abscissa of 30 m, the time equation of its motion is X = 30 - 15*t, and its (V-1) graph is a straight line with a slope of -15 and a y-intercept of 30, and 2. When another particle (B) with a time equation of XB = 101-70 (S.1) moves on the same axis, (A) and (B) meet at time t = 2.13 s and position X = -32.7 m. The distance separating (A) and (B) at t = 8 s is 369 m.
1.a. The time equation of the motion of (A) is given by:
X = XoA + Vt
where X is the position of (A) at time t, XoA is the initial position of (A), V is the velocity of (A) and t is the time elapsed since the start of the motion.
Plugging in the given values, we get:
X = 30 - 15t
b. The (V-1) graph of (A) is a straight line with a slope of -15 (since the velocity is constant and negative) and a y-intercept of 30 (since the initial position is 30). The graph looks like this:( below)
2a. To determine the instant at which (A) and (B) meet, we need to find the time t at which their positions are equal. Equating the time equations of (A) and (B), we get:
30 - 15t = 101 - 70t
Solving for t, we get:
t = 2.13 s
To find the position at which they meet, we can plug this value of t into either of the time equations and get:
X = 101 - 70*2.13 = -32.7 m
So (A) and (B) meet at time t = 2.13 s and position X = -32.7 m.
b. To determine the distance separating (A) and (B) at t = 8 s, we need to find their positions at that time. Using the time equation of (A), we get:
Xa = 30 - 158 = -90 m
Using the time equation of (B), we get:
Xb = 101 - 708 = -459 m
The distance separating (A) and (B) at t = 8 s is:
|Xb - Xa| = |-459 - (-90)| = 369 m.
Hence, Two particles moving on the same axis, where one is uniformly moving with an initial abscissa of 30 m and a speed of 15 m/s, and the other is moving with a time equation of XB = 101-70 (S.1), meet at time t = 2.13 s and position X = -32.7 m, while the distance separating them at t = 8 s is 369 m.
To learn more about Velocity _time graph click:
https://brainly.com/question/11290682
#SPJ1
An airplane passenger has 120 cm3 of air in his stomach just before the plane takes off from a sea-level airport. What volume, in cubic centimeters, will the air have at cruising altitude at the same temperature (body temperature) if cabin pressure drops to 7.50 × 104 Pa and no air leaves their stomach?
The volume will the air have at cruising altitude at the same temperature (body temperature) if cabin pressure drops to 7.50 × 10⁴ Pa and no air leaves their stomach is 162 cm³.
To determine the volume of air in the passenger's stomach at cruising altitude, we need to consider the initial and final pressure. The initial volume is 120 cm³ and the cabin pressure at cruising altitude is 7.50 × 10⁴ Pa. We can use Boyle's law, which states that the product of pressure and volume remains constant when temperature is constant: P₁V₁ = P₂V₂.
However, we first need to determine the initial pressure at sea level. Standard atmospheric pressure at sea level is approximately 1.013 × 10⁵ Pa. Now we can use Boyle's law:
(1.013 × 10⁵ Pa)(120 cm³) = (7.50 × 10⁴ Pa)(V₂)
To solve for V₂, the final volume at cruising altitude:
V₂ = (1.013 × 10⁵ Pa)(120 cm³) / (7.50 × 10⁴ Pa)
≈ 162 cm³
So, the volume of air in the passenger's stomach at cruising altitude at the same temperature will be approximately 162 cm³.
Learn more about air volume: https://brainly.com/question/14602582
#SPJ11
A large plate subjected to pure shear σxy=S at remote boundaries contains a rigid circular inclusion in the region r
A rigid circular inclusion in a large plate subjected to pure shear at remote boundaries creates stress concentrations around the inclusion, which increase with decreasing shear modulus of the inclusion.
When a plate is subjected to pure shear stress, the stress distribution is uniform throughout the plate, except near the boundaries. However, the presence of a rigid circular inclusion within the plate creates stress concentrations around the inclusion due to the mismatch in stiffness between the inclusion and the surrounding matrix.
These stress concentrations increase with decreasing shear modulus of the inclusion. This phenomenon is important in understanding the behavior of composite materials, where the presence of inclusions of different materials affects the overall mechanical properties of the composite.
To know more about shear modulus, here
brainly.com/question/13261401
#SPJ4
--The complete question is, What is the effect of a rigid circular inclusion on the stress distribution of a large plate subjected to pure shear at remote boundaries? How does the value of the shear modulus of the inclusion affect the stress concentration around the inclusion?--
a solenoid that is 85.0cm long has a radius of 1.50 cm and a winding of 1500 turns; it carries a current of 4.60a. calculate the magnitude of the magnetic field inside the solenoid. (4 pt)
A solenoid that is 85.0cm long has a radius of 1.50 cm and a winding of 1500 turns; it carries a current of 4.60a, then the magnitude of the magnetic field inside the solenoid is approximately [tex]1.65 \times 10^{-2}[/tex] T.
To calculate the magnitude of the magnetic field inside the solenoid, we can use the formula B = μ₀ * n * I, where B is the magnetic field, μ₀ is the permeability of free space, n is the number of turns per unit length, and I is the current.
Here's a step-by-step explanation:
1. First, we need to find the number of turns per unit length (n). We're given that the solenoid has a length of 85.0 cm and a winding of 1500 turns. Convert the length to meters: 85.0 cm = 0.85 m.
n =( number of turns) /( length) = 1500 turns /[tex]\frac{1500 turns}{ 0.85 m}[/tex] = 1764.71 turns/m.
2. Next, we're given that the solenoid carries a current (I) of 4.60 A.
3. Now, we need to find the permeability of free space (μ₀). This is a constant value: μ₀ = [tex]4\pi \times 10^{-7}[/tex]T·m/A.
4. Finally, we can calculate the magnetic field (B) using the formula: B = μ₀ * n * I.
[tex]B = (4\pi \times 10^{-7} T \frac{m}{A} ) * (1764.71 turns/m) * (4.60 A).[/tex]
5. Solving the equation, we get:
[tex]B \approx 1.65 \times 10^{-2} T.[/tex]
So, the magnitude of the magnetic field inside the solenoid is approximately [tex]1.65 \times 10^{-2}[/tex] T.
To know more about solenoid refer here:
https://brainly.com/question/15576393#
#SPJ11
1. To use the measured d, we assume the current flows along the central axes of Rod CD and Rod AB. Because of the repulsive forces, the conduction electrons in each rod however tend to move as far away from the other rod as possible. Considering this effect, should the actual μ0 value be higher or lower than the measured μ0 value? Why?
7*10^-7 = μ0*L/2*pi*d*g
L = 0.296
d = 0.011
g = 9.8
μ0 = 1.76*10^-6
2. If the length of Rod AB is doubled while the length of Rod CD remains the same, will the result change?
The actual μ₀ value should be higher than the measured μ₀ value and doubling the length of the rod will not affect the μ₀ value.
Detailed explanation of the answer is given below:
1. If we consider the effect of repulsive forces causing the conduction electrons in each rod to move as far away from the other rod as possible, the actual μ₀ value should be higher than the measured μ₀ value.
The reason for this is that the effective distance between the centers of the rods would be slightly larger due to the repulsion, causing the denominator in the equation to increase, and thus requiring a higher μ₀ value to maintain the equality.
2. If the length of Rod AB is doubled while the length of Rod CD remains the same, the result will not change.
In the given equation, 7*10^-7 = μ0*L/2*pi*d*g, the length of the rods does not directly affect μ₀. The equation only depends on the distance (d) between the rods and the gravitational constant (g), so doubling the length of Rod AB will not affect the μ0 value.
Learn more about gravitational constant:
https://brainly.com/question/27943482
#SPJ11
an image formed when the light rays do not actually pass through the image location, and wouldnot appear on paper or film placed at that location is referred to as a
An image formed when light rays do not actually pass through the image location and would not appear on paper or film placed at that location is referred to as a "virtual image".
Virtual images are formed by the apparent intersection of light rays, which cannot be projected onto a surface, unlike real images. A virtual image is formed when the light rays appear to be coming from a particular location, but they do not actually converge at that location. Instead, they diverge or appear to be coming from a different location, creating the illusion of an image that would not be visible on paper or film placed at the location where the virtual image appears.
This phenomenon can be observed in mirrors, lenses, and other optical devices that reflect or refract light.
To know more about virtual image, visit:
https://brainly.com/question/12538517
#SPJ11
two parallel 3.0-cm-diameter flat aluminum electrodes are spaced 0.50 mm apart. the electrodes are connected to a 50 v battery.A) What is the capacitance?B) What is the magnitude of the charge on each electrode?
The capacitance (A) is 3.54 pF, and the magnitude of the charge (B) on each electrode is 177 pC.
To calculate the capacitance (A), use the formula C = ε₀ * A / d, where ε₀ is the vacuum permittivity (8.85 * 10⁻¹² F/m), A is the area of the electrode, and d is the distance between the electrodes. First, find the area of the electrode by using A = π * r², with r = 1.5 cm. Then, plug the values into the capacitance formula and solve.
To find the magnitude of the charge (B) on each electrode, use Q = C * V, where Q is the charge, C is the capacitance, and V is the voltage. Plug in the calculated capacitance and the given voltage (50 V) and solve for the charge.
To know more about capacitance click on below link:
https://brainly.com/question/28445252#
#SPJ11
What type of energy is used to crush dried corn
bauons
with a mortar and pestle?
The energy is used to crush dried corn with a mortar and pestle is mechanical energy.
The advantage of using a mortar and pestle, is that the substance is crushed with little force, preventing it from warming up.
Traditional mortar and pestle grinding for carrying out mechanochemical reactions is subject to changeable influences, both human and environmental, despite its widespread use and simplicity of operation. The amount of manual force used, which unavoidably varies between people and over time, affects how a person grinds. The results obtained by using a mortar and pestle are frequently unpredictable because of these difficult-to-control variables.
To learn more about mechanical energy, click:
https://brainly.com/question/20030300
#SPJ1
a wire of 1.0 mm diameter and 2.0 m length and 50 mω is melted and redrawn a 0.2 mm diameter wire. find new resistance of wire.
The resistance of the 0.2 mm diameter wire redrawn from a melted wire of 1.0 mm diameter is approximately 3125 mΩ.
To find the new resistance of the wire, we will first calculate the volume of the original wire and then find the new length using the given diameter. Lastly, we will apply the formula for resistance.
1. Volume of the original wire:
V = πr²h
V = π(0.5mm)²(2000mm) = 1570.8 mm³ (approx)
2. Find the new length (L₂):
V = πr²h
1570.8 = π(0.1mm)²(L₂)
L₂ = 50000 mm (50 m)
3. Calculate new resistance using the formula:
R = ρ(L/A)
Where ρ (rho) is the resistivity, L is the length, and A is the cross-sectional area.
First, find the resistivity (ρ) using the original resistance:
50 mΩ = ρ(2000mm) / (π(0.5mm)²)
ρ = 19.63 µΩm (approx)
Now, calculate the new resistance (R₂):
R₂ = 19.63 µΩm * (50000 mm) / (π(0.1mm)²)
R₂ ≈ 3125 mΩ (approx)
The new resistance of the 0.2 mm diameter wire is approximately 3125 mΩ.
Learn more about resistance here: https://brainly.com/question/28135236
#SPJ11
The resistance of the 0.2 mm diameter wire redrawn from a melted wire of 1.0 mm diameter is approximately 3125 mΩ.
To find the new resistance of the wire, we will first calculate the volume of the original wire and then find the new length using the given diameter. Lastly, we will apply the formula for resistance.
1. Volume of the original wire:
V = πr²h
V = π(0.5mm)²(2000mm) = 1570.8 mm³ (approx)
2. Find the new length (L₂):
V = πr²h
1570.8 = π(0.1mm)²(L₂)
L₂ = 50000 mm (50 m)
3. Calculate new resistance using the formula:
R = ρ(L/A)
Where ρ (rho) is the resistivity, L is the length, and A is the cross-sectional area.
First, find the resistivity (ρ) using the original resistance:
50 mΩ = ρ(2000mm) / (π(0.5mm)²)
ρ = 19.63 µΩm (approx)
Now, calculate the new resistance (R₂):
R₂ = 19.63 µΩm * (50000 mm) / (π(0.1mm)²)
R₂ ≈ 3125 mΩ (approx)
The new resistance of the 0.2 mm diameter wire is approximately 3125 mΩ.
Learn more about resistance here: https://brainly.com/question/28135236
#SPJ11
What is the definition of velocity and acceleration?
The definition of velocity is vector quantity that represents the rate of change of an object's position with respect to time. The definition of acceleration another vector quantity that represents the rate of change of an object's velocity with respect to time
Velocity has both magnitude (speed) and direction, making it different from speed, which is a scalar quantity with only magnitude. In simple terms, velocity indicates how fast an object is moving and in which direction. The formula for velocity is v = Δx/Δt, where v is velocity, Δx is the change in position, and Δt is the change in time.
Acceleration indicates how quickly an object is speeding up or slowing down, as well as changing its direction. The formula for acceleration is a = Δv/Δt, where a is acceleration, Δv is the change in velocity, and Δt is the change in time. Both velocity and acceleration are crucial concepts in physics, particularly in the study of motion. Understanding these terms helps us analyze and predict the behavior of moving objects in various situations, from everyday experiences to complex scientific phenomena.
Learn more about velocity at:
https://brainly.com/question/19979064
#SPJ11
A sound wave with wavelength λ0 and frequency f0 moves into a new medium in which the speed of sound is v1=2v0.
What is the new wavelength λ1?
Express your answer in terms of λ0.
What is the new frequency f1?
Express your answer in terms of f0.
The new frequency f1 is half of the original frequency f0.
When a sound wave moves into a new medium, its wavelength changes while its frequency remains constant. The new wavelength can be found using the equation:
λ1 = λ0 * (v0 / v1)
where λ0 is the wavelength in the original medium, v0 is the speed of sound in the original medium, and v1 is the speed of sound in the new medium.
Substituting the given values, we get:
λ1 = λ0 * (v0 / 2v0)
λ1 = λ0 / 2
Therefore, the new wavelength λ1 is half of the original wavelength λ0.
The new frequency f1 can be found using the equation:
f1 = f0 * (v0 / v1)
where f0 is the frequency in the original medium.
Substituting the given values, we get:
f1 = f0 * (v0 / 2v0)
f1 = f0 / 2
To learn more about Frequency & Wavelength : https://brainly.com/question/6576757
#SPJ11
what is the heat change when a 225 g sample of olive oil (c = 1.79 j/g c) is cooled from 95.8°c to 52.1°c?a. 1.76x104) b. 1.76x10 c. -9,83 x 10 d. 9.83 x 10) e. not enough information given
The solidification of olive oil is a slow and gradual process that takes the consistency from a liquid to a soft state to a solid state. The cooling process begins at 40-50°F. This means that the temperature of this oil will start to solidify.
To find the heat change when a 225g sample of olive oil (c = 1.79 J/g°C) is cooled from 95.8°C to 52.1°C, this formula can be used:
q = mcΔT
where:
q = heat change
m = mass of the sample (225 g)
c = specific heat capacity of olive oil (1.79 J/g°C)
ΔT = change in temperature (final temperature - initial temperature)
Step 1: Calculate ΔT
ΔT = 52.1°C - 95.8°C = -43.7°C
Step 2: Plug the values into the formula
q = (225 g)(1.79 J/g°C)(-43.7°C)
Step 3: Calculate q
q = -17637.975 J
Since the answer should be expressed in scientific notation, you can round it to two significant figures:
q ≈ -1.76 x 10^4 J
The heat change when the 225 g sample of olive oil is cooled from 95.8°C to 52.1°C is approximately -1.76 x 10^4 J.
So, the correct answer is (a.)
Know more about heat change and olive oil:
https://brainly.com/question/15675521
#SPJ11
a box of mass 4 kg is accelerated from rest across a floor at a rate of 4 m/s for 4 s. Find the net work done on the box.
The net work done is equal to the change in kinetic energy, the net work done on the box is 512 Joules.
To find the net work done on the box, we will use the work-energy theorem, which states that the net work done on an object is equal to its change in kinetic energy.
First, let's find the final velocity of the box after 4 seconds of acceleration. We can use the formula:
v = u + at
where v is the final velocity, u is the initial velocity (0 m/s since it starts from rest), a is the acceleration (4 m/s²), and t is the time (4 s). Plugging in the values, we get:
v = 0 + (4 m/s²)(4 s) = 16 m/s
Now, we can find the change in kinetic energy using the formula:
ΔKE = 0.5 * m * (v² - u²)
where ΔKE is the change in kinetic energy, m is the mass (4 kg), v is the final velocity (16 m/s), and u is the initial velocity (0 m/s). Plugging in the values, we get:
ΔKE = 0.5 * 4 kg * (16 m/s)² - 0 = 512 J
Since the net work done is equal to the change in kinetic energy, the net work done on the box is 512 Joules.
Learn more about kinetic energy :
https://brainly.com/question/26472013
#SPJ11
Antonina throws a coin straight up from a height of 1.2m above the water surface in a fountain. The coin strikes the water 1.3s later. We want to know the vertical velocity of the coin at the moment it strikes the water. We can ignore air resistance.
Which kinematic formula would be most useful to solve for the target unknown?
Answer: v=1,56(m/s)
Explanation: Called: g(Gravity acceleration) =10[tex]m/s^{2} \\[/tex](or 9,8[tex]m/s^{2}[/tex])
h=1,2m ; t=1,3s
Because the coin fell freely, the velocity is calculated by the formula:
v=[tex]\sqrt{2gh}[/tex] (1)
besides, you have time to touch the bottom of the water is 1,3s:
t=[tex]\sqrt\frac{2g}{h} }[/tex] (2)
(1) and (2) => v=1,56 (m/s)