A wrench with a diameter of 0.51 meter generates a torque of 155 Nm on a screw. Calculate the force applied in Newtons. (r = rF) 155 N 607.8 N 39.53 N 0 0.00165 N

The distance from the center of the central maximum to the first minimum is approximately 0.00357 m.

To find this distance, use the formula for the angular position of the first minimum in a double-slit interference pattern: θ = sin^(-1)(λ / (2 * d)), where λ is the wavelength (660 nm), and d is the slit separation (0.260 mm).

Convert the wavelength and slit separation to meters, and calculate the angle θ. Then, use the small angle approximation and the formula y = L * tan(θ), where L is the distance from the slits to the screen (0.990 m).

Calculate y, which represents the distance on the screen from the center of the central maximum to the first minimum.

To know more about central maximum click on below link:

https://brainly.com/question/30365113#

#SPJ11

The angular acceleration of the rotating turntable at t = 2.0 s is -10.16 rad/s².

To find the angular acceleration of the rotating turntable at t = 2.0 s, we need to first find the derivative of the given angular velocity function ω(t) = 4.5 + 0.64t - 2.7t².
Step 1: Differentiate the angular velocity function with respect to time t.
dω/dt = 0 + 0.64 - 5.4t
Step 2: Substitute t = 2.0 s into the derivative to find the angular acceleration.
α(t) = 0.64 - 5.4(2.0)
α(t) = 0.64 - 10.8
α(t) = -10.16 rad/s²
The angular acceleration of the rotating turntable at t = 2.0 s is -10.16 rad/s².

To learn more about angular velocity https://brainly.com/question/1452612

#SPJ11

a. The time constant (τ) for this RL circuit can be calculated using the formula τ = L/R, where L is the inductance and R is the resistance of the circuit. Plugging in the given values, we get τ = 18.0 mH / 4.33 Ω = 4.16 ms.

The time constant is a measure of how quickly the circuit reaches its steady state. It represents the time it takes for the current in the circuit to reach 63.2% of its final value after the switch is closed.

In other words, after a time equal to the time constant, the current in the circuit will have reached approximately 63.2% of its maximum value.

This means that if we wait for a time of about 5-time constants, the current in the circuit will have reached almost 100% of its final value, and the circuit will have effectively reached its steady state.

To know more about time constant refer here:

https://brainly.com/question/13860412#

#SPJ11

The sound level (in dB) of a hair dryer emitting a sound wave with an intensity of 4.65 µW/m² can be calculated using the following formula:

Sound level (dB) = 10 log (I/I0)

Where I is the sound wave intensity in question (4.65 µW/m²) and I0 is the reference intensity of 1 µW/m².

Substituting the values into the formula, we get:

Sound level (dB) = 10 log (4.65/1)

Sound level (dB) = 10 log (4.65)

Sound level (dB) = 57.6 dB (rounded to one decimal place)

Therefore, the sound level emitted by the hair dryer is 57.6 dB.
Hi! To calculate the sound level in decibels (dB) of a sound wave emitted by a hair dryer with an intensity of 4.65 µW/m², you can use the following formula:

Sound level (dB) = 10 × log10(I/I₀)

where I is the intensity of the sound wave (4.65 µW/m²) and I₀ is the reference intensity, which is 10^-12 W/m².

So, Sound level (dB) = 10 × log10(4.65 × 10^-6 W/m² / 10^-12 W/m²) = 73.68 dB

Therefore, the sound level of the hair dryer is approximately 73.68 dB.

Visit here to learn more about sound wave brainly.com/question/21995826

#SPJ11

As the object moves on the plane, its displacement from the unstretched position is x The work done by the object is mgsinθ.

Thus, The units of measurement for work, force, and displacement are joules, newtons, and meters, respectively.

When an object is moved across a specific distance by an external force, work is the quantity of energy that is transmitted to the object.

The quantity of energy transmitted to an object through work is referred to as the work done on the thing. Force on and displacement of the object are the two basic parts of work done on an object. For a force to exert its force along an object's path of motion, the object must be moved along that path.

Thus,  As the object moves on the plane, its displacement from the unstretched position is x . The work done by the object is mgsinθ.

Learn more about Work done, refer to the link:

https://brainly.com/question/3902440

#SPJ12

The movement of a bar magnet inside a coil is caused by the interaction between the magnetic field of the magnet and the current in the coil. When the magnet moves inside the coil, it induces a current in the coil, which creates a magnetic field that interacts with the field of the magnet.

This interaction causes the magnet to move towards the opposite side of the coil.
When the magnet reaches the other side of the coil, the direction of the current is reversed due to the change in magnetic field direction. This change in current direction then creates a magnetic field that opposes the field of the magnet, causing it to move back towards the other side of the coil. This cycle of movement and change in current direction continues until the magnet comes to a stop at the center of the coil.
The reason a bar magnet moves inside a coil from one side to the other and then changes the direction of the current is due to electromagnetic induction.

Step 1: When a bar magnet is moved inside a coil, it generates a magnetic field around the coil.
Step 2: As the magnet moves, the magnetic field around the coil changes. This change in the magnetic field induces an electromotive force (EMF) in the coil.
Step 3: The induced EMF causes a current to flow through the coil in a specific direction, according to Lenz's Law. This law states that the induced current will always flow in such a way that it opposes the change in the magnetic field that caused it.
Step 4: When the bar magnet passes through the center of the coil and starts moving towards the other side, the magnetic field changes direction.
Step 5: As a result of this change in the magnetic field, the induced EMF and current also change direction.
In summary, a bar magnet moves inside a coil from one side to the other and changes the direction of the current due to electromagnetic induction and Lenz's Law.

Visit here to learn more about magnetic field:

brainly.com/question/14848188

#SPJ11

Since UV light has greater energy photons than infrared light, indium is expected to exhibit the photoelectric effect with UV light but not with infrared light.

If indium is exposed to UV light, the photoelectric effect will manifest. When exposed to infrared light, it won't exhibit the photoelectric effect.

Certain metals, including zinc, cadmium, magnesium, etc., were found to only emit electrons from their surfaces when exposed to ultraviolet light with a short wavelength. Lithium, sodium, potassium, caesium, and rubidium are examples of alkali metals that can be sensitive to visible light.

To know more about UV light visit:-

https://brainly.com/question/30767013

#SPJ1

Tripling the tension in a guitar string will change its natural frequency by a factor of A. [tex]3^1^/^2[/tex]

The natural frequency of a vibrating string, like a guitar string, is determined by its tension, length, and mass per unit length. This relationship is given by the formula:

f = (1/2L) × √(T/μ)

where f is the natural frequency, L is the length of the string, T is the tension, and μ is the mass per unit length.

Now, let's consider the case when the tension is tripled. Let f₁ be the original frequency and f₂ be the new frequency after tripling the tension. We have:

f₁ = (1/2L) × √(T/μ)
f₂ = (1/2L) × √(3T/μ)

To find the factor by which the natural frequency changes, divide f₂ by f₁:

(f₂ / f₁) = [√(3T/μ)] / [√(T/μ)] = √(3T/μ)×√(μ/T) = √3

So, tripling the tension in a guitar string will change its natural frequency by a factor of √3, which corresponds to option A. [tex]3^1^/^2[/tex] .

To know more about natural frequency refer here :

https://brainly.com/question/12936127

#SPJ11

The vector that models the ship's movement in component form is ⟨38.71, 39.21⟩.

To find the vector in component form, we will follow these steps:
1. Convert the bearing of N47E to a standard angle.
2. Calculate the horizontal (x) and vertical (y) components of the vector using trigonometry.
Step 1: Convert N47E to a standard angle:
N47E means 47 degrees to the east of the north direction. To find the standard angle, measured counterclockwise from the positive x-axis, we subtract 47 degrees from 90 degrees: 90 - 47 = 43 degrees.
Step 2: Calculate the horizontal and vertical components:
Now that we have the standard angle, we can use trigonometry to find the x and y components of the vector. The ship travels 55 miles at an angle of 43 degrees. Using cosine and sine, we get:
x = 55 * cos(43°) ≈ 38.71
y = 55 * sin(43°) ≈ 39.21
Thus, the vector in component form is ⟨38.71, 39.21⟩.

Learn more about vector here:

https://brainly.com/question/29740341

#SPJ11

Hydrogen bonding does not occur in a pure sample of dimethyl ether.

A hydrogen bond is an interaction between a hydrogen atom bonded to an electron-rich region elsewhere in the same molecule or in a different molecule with a very electronegative atom (like O, N, or F), resulting in an attractive force. However, dimethyl ether contains only C and H atoms, which have low electronegativities and cannot participate in hydrogen bonding, resulting in a repulsive force. In dimethyl ether, hydrogen is bonded to a low electronegative atom (like C), which does not allow for hydrogen bonding to take place.

Learn more about Hydrogen bonding at  brainly.com/question/30885458

#SPJ11

The magnitude of the total linear acceleration at t = 0 for a point on the object 8.5 cm from the axis is 11.9 cm/s².

To find the linear acceleration, we first need to determine the angular acceleration (α) and angular velocity (ω) at t = 0.

1. Differentiate θ(t) with respect to time to find the angular velocity: ω(t) = d(θ(t))/dt = βθ0 * [tex]e^\beta^t[/tex]
2. Differentiate ω(t) to find the angular acceleration: α(t) = d(ω(t))/dt = β²θ₀ * [tex]e^\beta^t[/tex].
3. Plug in t = 0 into both equations: ω(0) = βθ₀ and α(0) = β²θ₀.
4. Calculate the radial (ar) and tangential (at) linear accelerations: ar = rω² and at = rα.
5. Add ar and at in quadrature to find the total linear acceleration: a_total = √(ar² + at²).

With the given values of β = 2 s⁻¹, θ₀ = 0.7 rad, and r = 8.5 cm, the total linear acceleration is 11.9 cm/s².

To know more about angular acceleration click on below link:

https://brainly.com/question/29428475#

#SPJ11

The big ideas needed to find the initial speed of a clay ball of mass are Newton's laws of motion, kinetic energy, and conservation of momentum.

To find the initial speed of a clay ball, you will need to understand Newton's laws of motion, which govern the movement of objects.

First, consider the forces acting on the clay ball and how they influence its acceleration. Then, apply the second law of motion, which states that the force acting on an object is equal to its mass times its acceleration (F=ma). Next, use the concept of kinetic energy, which is the energy an object possesses due to its motion.

The formula for kinetic energy is KE = (1/2)mv², where m is the mass and v is the velocity.

Finally, apply the principle of conservation of momentum, which states that the total momentum before a collision or interaction is equal to the total momentum after. By analyzing the situation using these concepts, you can solve for the initial speed of the clay ball of mass.

To know more about conservation of momentum click on below link:

https://brainly.com/question/25028535#

#SPJ11

To calculate the three-sigma control limits, we first need to find the mean and standard deviation of the sample.

The mean is:

μ = (4 + 12 + 16 + 8 + 9 + 6 + 5 + 12 + 15 + 7 + 6 + 4 + 2 + 11) / 14 = 8.071

The standard deviation is calculated using the standard deviation formula and is arrived at:

σ = 4.319

The three-sigma control limits are:

Upper control limit = μ + 3σ = 8.071 + (3 × 4.319) = 20.027

Lower control limit = μ - 3σ = 8.071 - (3 × 4.319) = -3.886

b. We can check if the process is in control by looking at whether any of the data points fall outside of the control limits.

From the given data, we can see that the maximum number of complaints is 16, which is well within the upper control limit of 20.027. The minimum number of complaints is 2, which is also well within the lower control limit of -3.886.

Therefore, based on the given data, we can conclude that the process is in control.

Learn more about mean and standard deviation here:

https://brainly.com/question/28108712

#SPJ1

The magnitude and direction of the magnetic force each exerts on the other is 0.006392 N towards each other.

To find the magnitude and direction of the magnetic force between the two power lines, we'll use Ampere's Law. The magnetic force between two parallel wires carrying current is given by:

F = (μ₀ * I₁ * I₂ * L) / (2 * π * d)

where F is the magnetic force, μ₀ is the permeability of free space (4π × 10⁻⁷ Tm/A), I₁ and I₂ are the currents in the wires, L is the length of the wires, and d is the distance between the wires.

In this case, I₁ = 140 A, I₂ = -140 A (since the currents are antiparallel), L = 280 m, and d = 0.35 m (converted from 35 cm).

F = (4π × 10⁻⁷ Tm/A * 140 A * -140 A * 280 m) / (2 * π * 0.35 m)

F ≈ -0.006392 N (negative sign indicates the force is attractive)

Since the forces are attractive, then the direction is towards each other. Hence, the magnetic force each powerline exerts on the other is 0.006392 N towards each other.

Learn more about Ampere's Law here: https://brainly.com/question/17070619

#SPJ11

If the plate area of a parallel plate capacitor is decreased while it is connected to a 9 volt battery, the electric field between the plates of the capacitor will increase.

This is because the capacitance of a parallel plate capacitor is inversely proportional to the distance between the plates. As the plate area decreases, the distance between the plates decreases, which increases the capacitance. The relationship between the voltage (V), electric field (E), and the plate separation (d) can be expressed as: V = E * d. Since the voltage across the capacitor remains constant, the increase in capacitance leads to an increase in the electric field between the plates. The dielectric constant of the dielectric material between the plates will also affect the capacitance, but it is not directly related to the increase in electric field due to the decrease in plate area.

To learn more about capacitor click here https://brainly.com/question/29301875

#SPJ11

As the Moon moves further away from Earth, the apparent size of the Moon will appear smaller from Earth.

This means that during a solar eclipse, the Moon may not be able to completely block out the Sun, resulting in what is called an annular eclipse. In an annular eclipse, the outer edges of the Sun will still be visible around the Moon, creating a "ring of fire" effect. So, in the distant future, solar eclipses may be more likely to be annular eclipses rather than total eclipses due to the increasing distance of the Moon from Earth. However, it is important to note that this process of the Moon moving further away from Earth is a slow one, taking place over millions of years.

To learn more about distance click here https://brainly.com/question/29769926

#SPJ11

The amount of energy delivered to the toaster is 43,876.8 joules.

This is the amount of electrical energy that is converted into heat energy to toast the bread.

To solve this problem, we need to use the formula for electrical energy:

Energy = Power x Time

where Power is the electrical power in watts and Time is the time in seconds.

We can find the electrical power using the formula:

Power = Voltage² / Resistance

where Voltage is the electrical potential difference in volts and Resistance is the electrical resistance in ohms.

In this case, we know the resistance of the toaster (13 ohms) and the voltage of the outlet (120 volts). Using the formula for power, we get:

Power = 120² / 13 = 1096.92 watts

Now we can use the formula for energy to calculate the total energy delivered to the toaster:

Energy = Power x Time = 1096.92 x 40 = 43,876.8 joules

To know more about electrical energy click on below link:

https://brainly.com/question/18739636#

#SPJ11

Heating the gas at constant volume allows for the most efficient transfer of heat energy to raise the temperature of the gas by a given amount, such as 10°C, and would require the least amount of heat energy.

You should heat the gas at a constant volume in order to use the least amount of heat energy to raise the temperature by 10°C.

When heat is added to a gas at constant volume, the entire amount of energy is used to increase the temperature of the gas. This is because at constant volume, no work is done by the gas to expand against external pressure, and all the heat energy goes towards increasing the internal energy of the gas, which results in a higher temperature.

On the other hand, when heat is added to a gas at constant pressure, some of the energy is used to do work against the external pressure as the gas expands. This means that less energy is available to increase the internal energy of the gas and raise its temperature by the same amount compared to heating at constant volume.

You can learn more about heat energy at: brainly.com/question/1495272

#SPJ11

The kinetic energy of a 0.135-kg baseball thrown at 40.0 m/s (90.0 mph)  is c. 108 J.

To find the kinetic energy of the baseball, you can use the following formula:

Kinetic energy (KE) = 0.5 × mass × velocity²

In this case, the mass of the baseball is 0.135 kg, and the velocity is 40.0 m/s. Plug these values into the formula:

KE = 0.5 × 0.135 kg × (40.0 m/s)²

Now, calculate the kinetic energy:

KE = 0.5 × 0.135 kg × 1600 m²/s²
KE = 0.0675 × 1600
KE = 108 J

So, the correct answer is c. 108 J.

Learn more about "kinetic energy": https://brainly.com/question/25959744

#SPJ11

Hi! I'd be happy to help you with your question.

To find the final temperature of the iron piece, we can use the formula:

q = mcΔT

where:
q = heat supplied (9.5 J)
m = mass of iron (10.0 g)
c = specific heat of iron (0.450 J/g·°C)
ΔT = change in temperature (final temperature - initial temperature)

First, we need to solve for ΔT:

9.5 J = (10.0 g) × (0.450 J/g·°C) × ΔT

To find ΔT, divide both sides by the product of mass and specific heat:

ΔT = 9.5 J / (10.0 g × 0.450 J/g·°C) = 2.11°C

Now, we can find the final temperature by adding the initial temperature to the change in temperature:

Final temperature = initial temperature + ΔT = 25°C + 2.11°C = 27.11°C

So, the final temperature of the 10.0 g piece of iron is 27.11°C when supplied with 9.5 J of heat.

To know more about temperature visit link :

https://brainly.com/question/15267055

#SPJ11

The longest wavelength in nanometers that will undergo destructive interference when shone on the oil can be determined by wavelength and destructive interference condition using the formula λ = (2 * Δ) / (2m + 1).

To determine the longest wavelength in nanometers that will undergo destructive interference when shone on the oil, we'll need to consider the following terms:

1. Wavelength: The distance between two consecutive points on a wave (e.g., from one crest to another). It is measured in nanometers (nm) for light waves.
2. Destructive interference: A phenomenon that occurs when two waves meet and their amplitudes cancel each other out, resulting in a reduced or zero-amplitude wave.

In order to provide a specific answer to your question, we would need additional information, such as the thickness of the oil layer and the angle of incidence of the light.

The constructive and destructive interference in thin films (like oil) is governed by the interference conditions based on the path difference between the light waves reflecting off the top and bottom surfaces of the film.

However, a general approach to find the longest wavelength (λ) that undergoes destructive interference is as follows:

Step 1: Determine the oil layer thickness (d) and the angle of incidence (θ).

Step 2: Calculate the optical path difference (Δ) using the formula Δ = 2d * cos(θ).

Step 3: Use the destructive interference condition,

Δ = (m + 1/2)λ, where m is an integer.

Step 4: Rearrange the formula and solve for λ:

λ = (2 * Δ) / (2m + 1).

Step 5: Find the largest integer value for m that satisfies the given conditions, and calculate the longest wavelength that undergoes destructive interference.

Learn more about wavelength:

https://brainly.com/question/10750459

#SPJ11

The volume and shape of the spherical cavity inside the solid metal ball will remain the same when the ball is heated. The correct option is c. remain unaffected.

When a solid ball of metal is heated, it expands due to the increase in temperature. However, the spherical cavity inside the ball does not expand as it is already a fixed size. This means that the space occupied by the cavity remains the same, while the metal ball around it expands.

As a result, the volume of the cavity inside the metal ball remains unaffected when the ball is heated. The shape of the cavity will also remain the same as it is a fixed shape that cannot change due to temperature changes.

It is important to note that the type of metal the ball is made of will affect how much it expands when heated. Some metals have a higher coefficient of thermal expansion, meaning they will expand more than others when heated. However, this expansion will only affect the outer surface of the metal ball and not the cavity inside it.
Here you can learn more about spherical cavity

https://brainly.com/question/29307418#

#SPJ11  

According to the question the orbital speed of the satellite is 3300 m/s.

Orbital speed is the speed at which an object orbits, or revolves around, another object. It is the speed of an object in a circular orbit around a central body, such as a star, a planet, or a moon. The speed of an object in an elliptical orbit is not constant, however, it changes as the object moves closer to, or further away from, the central body.

T = 2π√(a3/μ)
Plugging these values into the equation above, we get:
T = 2π√(2.1x107 m3/3.986x1014 m3/s2)
T = 2.5x104 s
The orbital period of the satellite is 2.5x104 s, or 6.9 hours.
v = 2πa/T
Plugging in the values for a and T, we get:
v = 2π(2.1x107 m)/(2.5x104 s)
v = 3300 m/s
The orbital speed of the satellite is 3300 m/s.

To learn more about orbital speed
https://brainly.com/question/7260440
#SPJ1

The cars' accelerations ranked from largest to smallest are, Car 3, Car 1, Car 4, Car 2.

To rank the cars' accelerations from largest to smallest, we first need to calculate their centripetal accelerations. Centripetal acceleration is the acceleration experienced by an object moving in a circular path and is given by the formula:

a = v² / r

where a is the centripetal acceleration, v is the speed of the car, and r is the radius of the circular track. Since the distances given in the table correspond to the positions of the cars on the track, we can assume that the track is a circle with a radius of 5 meters (half the difference between the distances of each car). Using this radius, we can calculate the centripetal acceleration for each car:

Car 1: a = (40 m/s)² / 5 m = 320 m/s²

Car 2: a = (40 m/s)² / 10 m = 160 m/s²

Car 3: a = (50 m/s)² / 5 m = 500 m/s²

Car 4: a = (50 m/s)² / 10 m = 250 m/s²

Therefore, the cars' accelerations ranked from largest to smallest are:

Car 3 (500 m/s²)

Car 1 (320 m/s²)

Car 4 (250 m/s²)

Car 2 (160 m/s²)

To know more about acceleration, here

brainly.com/question/12550364

#SPJ4

--The complete question is, Part C Four racecars are driving at constant speeds around a circular racetrack. The data table gives the speed of each car and each car's distance at that instant.

Speed (m/s) 40 40 50 50

Position (m) 20 25 20 25

Rank the cars' accelerations from largest to smallest.--

The value of the constant A in the given equation is 2.97 × 10⁻⁴ C.

To find the value of A, we need to use the initial conditions given in the problem. At t=0, the current is zero and the initial charge on the capacitor is 2.80 × 10⁻⁴ C.
Using the equation for charge in an L-R-C series circuit, we can write:
q = q(max) * sin(ωt + ϕ)
where q(max) is the maximum charge on the capacitor, ω is the angular frequency, and ϕ is the phase angle.
We can find the values of ω and ϕ using the given values of L, C, and R:
ω = 1 / √(LC) = 5000 rad/s
ϕ = arctan((1/RC) - (ωL/R)) = 1.392 rad
Now we can rewrite the equation for charge in terms of the given equation:
q = Ae^(-R/2L)t * cos(√(1/LC - R²/4L²)t + ϕ)
At t=0, we know that q=2.80 × 10⁻⁴ C. Plugging this in and solving for A, we get:
2.80 × 10⁻⁴ = A * cos(ϕ)
A = 2.80 × 10⁻⁴ / cos(ϕ)
A = 2.80 × 10⁻⁴ / cos(1.392)
A = 2.97 × 10⁻⁴ C
Therefore, the value of the constant A in the given equation is 2.97 × 10⁻⁴ C.

Learn more about "capacitor" at:https://brainly.com/question/30874471

#SPJ11

The magnitude of the charge on each plate is 54.6 × 10⁻¹² C when a 5.2 pf parallel plate capacitor is connected to a 10.5 v battery.

To find the magnitude of the charge on each plate of a parallel-plate capacitor, you can use the formula:

Q = C × V

where Q is the charge on each plate, C is the capacitance of the capacitor, and V is the voltage across the capacitor.

Given the values in the question:

V = 10.5 V (voltage)
C = 5.2 pF (capacitance, in picofarads)

First, we need to convert the capacitance from picofarads (pF) to farads (F):

1 pF = 1 × 10⁻¹² F

So, C = 5.2 × 10⁻¹² F

Now, we can use the formula to find the charge:

Q = C × V
Q = (5.2 × 10⁻¹² F) × (10.5 V)
Q = 54.6 × 10⁻¹² C

The magnitude of the charge on each plate is 54.6 pC (pico coulombs) or 54.6 × 10⁻¹² C.

Learn more about parallel-plate capacitor:

https://brainly.com/question/30312803

#SPJ11

COP of the air conditioning unit is 7.596, and the rate at which heat is rejected to the ambient from the air conditioner condenser is 21.49 kW.

To determine the Coefficient of Performance (COP) of the 18,000 Btu/h split air conditioner and the rate at which heat is rejected to the ambient from the air conditioner condenser, follow these steps:

1. Convert the air conditioner capacity from Btu/h to kW:
18,000 Btu/h * (1,055 kJ / 1 Btu) * (1 kW / 1,000 kJ) = 18,990 W = 18.99 kW

2. Calculate the COP:
COP = Cooling Capacity (kW) / Power Input (kW)
COP = 18.99 kW / 2.5 kW = 7.596

3. Calculate the heat rejected to the ambient:
Heat Rejected = Cooling Capacity + Power Input
Heat Rejected = 18.99 kW + 2.5 kW = 21.49 kW

So, the COP of the air conditioning unit is 7.596, and the rate at which heat is rejected to the ambient from the air conditioner condenser is 21.49 kW.

Know more about Heat Rejection here:

https://brainly.com/question/29498231

#SPJ11

With respect to the earth, the boat is moving at a speed of 4.07 m/s while angled 60.3 degrees to the west of north.

To determine the area in ft2, multiply the stream's average depth by its width. To calculate the stream's velocity in feet per second, divide the distance travelled by the average transit time.

The water's velocity in the x-direction is 2.0 m/s slower than that of the ground. (since the water is flowing to the east). So, the following formula can be used to determine the boat's velocity in relation to the ground:

v_ground = v_water + v_boat

where v_water = (-2.0 m/s, 0) and v_boat = (0, 3.5 m/s)

v_ground = (-2.0 m/s, 0) + (0, 3.5 m/s) = (-2.0 m/s, 3.5 m/s)

the Pythagorean theorem and the inverse tangent function are used to determine the velocity's magnitude and direction:

|v_ground| = sqrt((-2.0 m/s)² + (3.5 m/s)²) = 4.07 m/s

θ = atan(3.5 m/s / (-2.0 m/s)) = -60.3° (measured counterclockwise from the positive x-axis)

To know more about speed visit:-

https://brainly.com/question/28224010

#SPJ1

The automobile stops and moves in the opposite direction of its starting velocity, as indicated by the negative sign. The length of the car's skid marks is around 136.05 metres.

Calculation-

the equation of motion

[tex]v^2 = u^2 + 2a s[/tex]

Given:

Mass of the car (m) = 1000 kg

Initial velocity (u) = 40 m/s

Final velocity (v) = 0 m/s

Coefficient of friction (f) = 0.60

The friction force (F) acting on the car

[tex]F = f * m * g[/tex]

the acceleration due to gravity (9.8 m/s^2).

Plugging in the values:

[tex]f = 0.60m = 1000 kgg = 9.8 m/s^2F = 0.60 * 1000 kg * 9.8 m/s^2F = 5880 N[/tex]

The acceleration (a) of the car

[tex]F = m * aPlugging in the values:F = 5880 Nm = 1000 kg5880 N = 1000 kg * aa = 5880 N / 1000 kga = 5.88 m/s^2[/tex]

the equation of motion to calculate the distance (s)

[tex]v^2 = u^2 + 2a s0 = (40 m/s)^2 + 2 * 5.88 m/s^2 * s0 = 1600 m^2/s^2 + 11.76 m/s^2 * s11.76 m/s^2 * s = -1600 m^2/s^2s = (-1600 m^2/s^2) / (11.76 m/s^2)s = -136.05 m[/tex]

To know more about travelling at a speed here:

brainly.com/question/29951715

#SPJ1

A battery has an internal resistance if 0.4 ohm and an e.m.f. of 6 volts. It really is connected to an SPST (single pole, single throw) switch, which is connected to the a 2.6 ohm resistor.

Answer. The formula for a battery's emf is V + I r, where V denotes the battery's terminal voltage, r denotes the battery's internal resistance, and I is the current flowing through the circuit.

The electromotive force (EMF) formula can be written as e = IR + Ir or e = V + Ir, where e is just the electromotive force (in volts), I is the current (in amps), R is the load resistance, and r is the reactance of the cell, measured in ohms.

To know more about battery visit:

https://brainly.com/question/21152182

#SPJ1