Answer two questions below:

The energy of a photon that has a frequency of 2.3 x 10¹⁴ Hz is 1.524 × 10-¹⁹J

HOW TO CALCULATE ENERGY OF A PHOTON:

E = hf

Where;

E = energy of photon (J)

h = Planck's constant (6.626 × 10-³⁴J)

f = frequency of photon (Hz)

E = 6.626 × 10-³⁴ × 2.3 × 10¹⁴

E = 15.24 × 10-³⁴+¹⁴

E = 15.24 × 10-²⁰J

E = 1.524 × 10-¹⁹J

Learn more at: https://brainly.com/question/23180082?referrer=searchResults

Answer:

false

Explanation:

hope this helps you

Answer:

False, if the flask becomes colder it's endothermic. I hope this helps! :)

When you rub an inflated balloon on your head and it makes your hair stand up, the force that makes the hair stand up is known as static electricity.

When the balloon is rubbed on the head, electrons from the hair atoms move into the balloon, thus making the balloon to be negatively charged and the hair positively charged due to loss of electrons.

Unlike charges attracts. Thus, when you try to pull the balloon away slowly, the positively charged hair and the negatively charged balloon will attract each other and this is usually what makes the hair stand up.

More on static electricity can be found here: https://brainly.com/question/24160155

Answer:

static electricity

Explanation:

this is because there is an imbalance between negative and positive charges

when you keep on rubbing, a negative charge is created which is carried by electrons.

when you pull the balloon away slowly, the opposite charges attract to each other which makes your hair attract to the balloon

Answer:

a

Explanation:

i took test

Answer:22.4 L methane reacts with 44.8 L of oxygen to give 22.4 L of CO  

2  and 44.8 L of water.

Explanation:

Answer:

Explanation:

a. NaCl+ AgNO3-----> NaNO3+ AgCl

b. Số mol của NaCl= 0,2*0,5= 0,1 (mol)

------> Số mol của kết tủa AgCl tạo thành= 0,1 mol (dựa vào phương trình hóa học)

-----> Khối lượng của kết tủa AgCl tạo thành= 0,1*143,5=14,35(g)

c. Số mol của AgNO3= số mol của NaCl= 0,1 (mol)

------> Nồng độ mol của dd AgNO3 đã tham gia phản ứng= [tex]\frac{0,1}{0,4}[/tex]=0,25(M)

Answer:

46.2 amu

Explanation:

The average atomic mass of an element can be determined using the percentage abundance and mass of its isotopes. The average atomic mass of the hypothetical element Jovian is 46.2 amu.

Most of the elements have two or more isotopes in nature with different percentage abundance and mass. The average atomic mass of the element is then calculated using the formula written below:

Average atomic mass = % abundance /100 × mass of isotope 1  +  % abundance /100 × mass of isotope 2 + .....

Given the mass % abundance of Jovian -44 = 22.4 %

Jovian- 46 = 44 %

Jovian -48 = (100 - (44 + 22.4)) = 33.6 %

Average atomic mass of Jovian  =  ( 22.4 /100 × 44 ) +  ( 44 /100 × 46) +  ( 33.6  /100 × 48 ) = 46.2 amu

Therefore, the average atomic mass of the hypothetical element is 46.2 amu.

To find more on isotopic mass, refer here:

https://brainly.com/question/18387647

#SPJ2

Answer: 1. (0.5 to 1)

              2. (Fluorine)

              3. (KNO3

              4. (Polar covalent bonds share electrons unequally, while nonpolar covalent bonds share electrons equally.)

              5. (Fe and S have a covalent bond, and S and O have covalent bonds, too.)

Explanation:

Ye, have great day.

The periodic table is an arrangement of elements according to their periodic properties.

Polar covalent bonds are those compounds in which unsymmetrical electron distribution in bonds leads to polarity in the molecule. Examples of such compounds include; HCl, CHCl3, etc. A polar covalent bond occurs when the electronegativity differences between atoms lies within the range of 0.5 to 1.

Since electronegativity increases across the period and we also know that highly electropositive metals(having very low electronegativity) and highly electronegative nonmetals(having high electronegativity)  form a strong ionic bond, it follows that fluorine (F) and cesium (Cs) will form a strong ionic bond.

A poly atomic ion is an ion that contains more than one atom. Given the options listed NH4^+ is an example of a polyatomic ion.

The difference between polar and nonpolar covalent bonds is that polar covalent bonds share electrons unequally, while nonpolar covalent bonds share electrons equally.

In FeSO4, Fe and S have an ionic bond, while S and O have covalent bonds.

Learn more: https://brainly.com/question/9328418

Answer:

Explanation:

Building Vocabulary

Match each term with its definition by writing the letter of the correct definition on

the line beside the term in the left column.

5. nucleus   b

6. proton     f

7. neutron   h

8. electron  d

9. atomic number    g

10. isotopes              c

11. mass number      a

12. energy level       e

a. the sum of protons and neutrons in the nucleus of an

atom

b. the very small center core of an atom

c. atoms of the same element that differ in the number

of neutrons, but have the same number of protons

d. the particle of an atom that moves rapidly in the

space outside the nucleus

e. a specific amount of energy related to the movement

of electrons in atoms

f. the particle of an atom with a positive charge

g. the number of protons in the nucleus of every atom

of an element

h. the particle of an atom that is neutral

-. mass number  a.

12. energy level    e

A non-covalent interactions between  molecules are van der Waal's forces and hydrogen bonds.

Non-covalent interaction is an interaction which does not involve sharing of electrons and in this aspect it differs from covalent bond.It rather involves dispersed variations  of electromagnetic interactions  which are present between the molecules or within the molecule.

The energy released during the formation of these interactions  is of the order of 1-5 kcal .They are classified as electrostatic, pi effects , van der waals forces  and hydrophobic effects.

They are important in maintaining the three dimensional structure of large molecules such as proteins ,nucleic acids ,etc.They are also involved in biological processes . They heavily influence drug design process and design of materials.

Learn more about non-covalent interactions,here:

https://brainly.com/question/10736477

#SPJ2

Answer:

c) The natural home or environment of an animal, plant, or other organism

Explanation:

Please note that in order to post questions in Science, you must post in Science section, but not in History. You are asking a wrong question in the wrong section.

Thank You! Please Mark Brainliest! :)

Here we need to see the differences between a liquid and a gas, and how that affects the volume and effects of pressure on them.

The correct option is:

Gases are more readily compressed than liquids are because there is more space  between the particles in a gas than in a liquid.

So we have two syringes, one with air and the other with water.

The student applies the same amount of pressure to both of them, but as water is denser than air, in a given change dV of volume in the syringe, the mass of water is larger than the mass of air.

This means that for the same pressure, we should expect the change in volume to be smaller in the syringe with water.

Why this happens?

Gases are more readily compressed than liquids are because there is more space  between the particles in a gas than in a liquid.

This means that for the air is easier to be compressed (the distance between particles is larger, so the same pressure compresses more a gas than a liquid) and exit the syringe than for the water, and this translates to the change in volume per unit of pressure applied, which is larger for gases than liquids.

If you want to learn more, you can read:

https://brainly.com/question/1898264

Answer:

Here's it.

Explanation:

Concentrated acids are very corrosive and dangerous chemicals that are commonly encountered in the laboratory. ... Concentrated acids may be fatal if inhaled; and can cause severe eye and skin burns, severe respiratory and digestive tract burns. Contact with other materials may cause a fire.

Answer:

The more concentrated acid something is the more strength it has.

Explanation:

If it is very strong it could melt a spoon, and burn human flesh, I don't think this needs further explanation.

It is appropriate to form double or triple bonds in a Lewis structure when four or six electrons are shared.

A Lewis structure is a representation of a molecule using dots to show the valence electrons in the molecule. This dots are shown around the symbols of the elements.

However, in instances where four or six electrons are shared between bonding atoms, a double or triple bond is used. A double bond means that four electrons are shared. A triple bond means that six electrons are shared.

Learn more: https://brainly.com/question/1527403

Answer:

A catalytic converter

Explanation:

Diesel filters are used to clean fuel not emissions, engine injection puts fuel directly into the engine and a transmission clutch changes the cars transmission.

Answer:

carbon monoxide and nitrogen oxide are needed to be properly maintained

Answer:

D) C2H6

Explanation:

All the other molecules contain double (or triple) bonds except for C2H6.

Answer:

iiiiiiddddiiilllooeiuehe

Answer:

Random errors will shift each measurement from its true value by a random amount and in a random direction. These will affect reliability (since they're random) but may not affect the overall accuracy of a result.

Answer:

Map scale refers to the relationship (or ratio) between distance on a map and the corresponding distance on the ground.

Explanation:

For example, on a 1:100000 scale map, 1cm on the map equals 1km on the ground.

Answer:

Which line represents travel at the fastest speed? Justify your answer.__

b. Describe the line that should be added for an object that is not moving with respect to the chosen reference point.__

Answer the question using 5 complete sentences and the vocabulary terms; velocity, position, and distance

Which line represents travel at the fastest speed? Justify your answer.__

b. Describe the line that should be added for an object that is not moving with respect to the chosen reference point.__

Answer the question using 5 complete sentences and the vocabulary terms; velocity, position, and distance

Explanation:

Answer: D. Potassium

Explanation:

A. Salad- a mixture of vegetables or fruits❌

B. Sugar- a compound made up of many elemnts❌

C. Water-  a molecule made up of two elements (water and hydrogen)❌

D. Potassium- the only pure element of the options provided.✅

Answer:

D, potassium

Explanation: took test ! btw

THE ANSWER IS ON THE PICTURE HOPE IT HELPS

Answer:

A.3

Three primary amines

Ba amin chính

Answer:

Chromatography involves solvent separation on a solid medium. Distillation takes advantage of differences in boiling points. Evaporation removes a liquid from a solution to leave a solid material. Filtration separates solids of different sizes.

Explanation:

give brainliest

Hope you could get an idea from here.

Doubt clarification - use comment section.