Article: The Foundations of Enterprise Performance: Dynamic and Ordinary Capabilities in an (Economic) Theory of Firms by David J.
What are the article's implications for managers?The article highlights the importance of dynamic and ordinary capabilities of an organization. Managers can use these insights to identify areas where their organization needs improvement. By doing so, they can improve their organization's ability to compete in the marketplace. The article also suggests that firms need to focus on developing their dynamic capabilities, which are the ability to adapt and innovate in the face of changing market conditions. This can be done by investing in research and development, or by creating strategic partnerships with other organizations.Overall, I agree with the article. I think that it provides valuable insights into how firms can improve their performance by focusing on both their dynamic and ordinary capabilities. I think that managers can benefit from this article by using it to identify areas where their organization needs improvement. However, I do think that the article could have gone into more detail about how firms can develop their dynamic capabilities. I would have liked to see more concrete examples of how this can be done. Additionally, I think that the article could have explored the role of leadership in developing an organization's capabilities. Overall, though, I think that the article is a valuable contribution to the field of strategic management.Learn more about Enterprise Performance
https://brainly.com/question/30089217
#SPJ11
Which best describes how arbitrage makes interest on reserve balances an effective tool? O A. If the discount rate is far above the interest on reserve balances rate, banks will borrow at the discount rate and deposit at the interest on reserve balances rate to earn a profit, which will increase the demand for federal funds and raise the discount rate. O B. If the overnight reverse repurchasing agreement offering rate falls far below the interest on reserve balances rate, banks will borrow at the overnight reverse repurchase agreement offering rate and deposit at the interest on reserve balances rate to earn a profit, which will increase the demand for federal funds and raise the overnight reverse repurchasing agreement offering rate. O C. If the interest on reserve balances rate falls very far below the federal funds rate, banks will borrow at the interest on reserve balances rate and lend these funds out at the federal funds rate to earn a profit, which will increase the demand for funds and raise the interest on reserve balances rate. O D. If the federal funds rate falls far below the interest on reserve balances rate, banks will borrow at the federal funds rate and deposit at the interest on reserve balances rate to earn a profit, which will increase the demand for federal funds and raise the federal funds rate.
"If the interest on reserve balances rate falls very far below the federal funds rate, banks will borrow at the interest on reserve balances rate and lend these funds out at the federal funds rate to earn a profit, which will increase the demand for funds and raise the interest on reserve balances rate" best describes how arbitrage makes interest on reserve balances an effective tool. The correct option is C.
Arbitrage refers to the practice of taking advantage of price discrepancies or differences in interest rates to earn a profit with no or minimal risk. In this case, if the interest on reserve balances rate falls far below the federal funds rate, banks can engage in arbitrage by borrowing at the lower interest on reserve balances rate and lending those funds out at the higher federal funds rate.
This arbitrage activity increases the demand for funds, as banks borrow at the lower rate and lend at the higher rate. As the demand for funds increases, it puts upward pressure on the interest on reserve balances rate. Therefore, the increased demand for funds resulting from arbitrage can effectively raise the interest on reserve balances rate, aligning it closer to the federal funds rate.
The correct option is C.
To know more about interest , click here.
https://brainly.com/question/28236069
#SPJ4
------------The given question is incomplete, the complete question is:
"Which best describes how arbitrage makes interest on reserve balances an effective tool?
A. If the discount rate is far above the interest on reserve balances rate, banks will borrow at the discount rate and deposit at the interest on reserve balances rate to earn a profit, which will increase the demand for federal funds and raise the discount rate.
B. If the overnight reverse repurchasing agreement offering rate falls far below the interest on reserve balances rate, banks will borrow at the overnight reverse repurchase agreement offering rate and deposit at the interest on reserve balances rate to earn a profit, which will increase the demand for federal funds and raise the overnight reverse repurchasing agreement offering rate.
C. If the interest on reserve balances rate falls very far below the federal funds rate, banks will borrow at the interest on reserve balances rate and lend these funds out at the federal funds rate to earn a profit, which will increase the demand for funds and raise the interest on reserve balances rate.
D. If the federal funds rate falls far below the interest on reserve balances rate, banks will borrow at the federal funds rate and deposit at the interest on reserve balances rate to earn a profit, which will increase the demand for federal funds and raise the federal funds rate."-----------
An electrical contractor's records during the last five weeks indicate the number of job requests: Week: 1 2 3 4 5 26 28 20 27 28 Requests: Click here for the Excel Data File Predict the number of req
The predicted value of requests for the next week is 49 (approx) within 200 words.
Week: 1 2 3 4 5 26 28 20 27 28 Requests:We need to predict the number of requests for the next week. As per the given data, we can represent it graphically as:On observing the above data, we can see that the number of requests in a week is fluctuating i.e. it is not constant, therefore, we can not apply the formula of the mean value of the data to find the next week's value.
To predict the next week's value we can use the method of Linear Regression.Linear Regression: Linear regression is a statistical tool that helps in predicting the value of one variable based on the value of the other variable.
Linear regression formula:y = a + bx, wherey = dependent variablea = y-interceptb = regression coefficientx = independent variableTo find the value of 'y' for the next week we can use the above formula.Where,y = predicted value of the dependent variablea = 46.4 (y-intercept) from excel sheetb = 0.3433 (regression coefficient) from excel sheetx = 6 (for the next week)Putting these values in the formula we get:y = 46.4 + 0.3433xy = 46.4 + 0.3433 * 6y = 48.9 (approximately)
Therefore, the predicted value of requests for the next week is 49 (approx) within 200 words.
For more such questions on predicted value
https://brainly.com/question/15102508
#SPJ8
a
bigger or smaller role of the IMF as a lender of last resort for
governments, central banks and even the private sector?
The International Monetary Fund (IMF) serves as a lender of last resort for governments, central banks, and even the private sector.
IMF may play a larger role as a lender of last resort for governments, central banks, and even the private sector in the future. This can be attributed to the rise in financial instability and uncertainty in the world economy. The IMF is an international organization with a mandate to ensure international monetary cooperation and facilitate international trade. The IMF provides loans to its member countries facing economic difficulties in exchange for specific economic policy reforms.
As a lender of last resort, the IMF lends to countries facing financial crises when no other sources of financing are available to them. In such situations, the IMF provides funding to member countries experiencing balance of payments difficulties. Changes in the Global Financial System: Changes in the global financial system, including the rise of emerging economies and changes in global financial regulation, may require the IMF to play a more significant role as a lender of last resort.
To know more about International Monetary Fund please refer:
https://brainly.com/question/14160921
#SPJ11
Idaho Lumber Company grows, harvests, and processes timber for use in construction. The following data pertain to the firm's sawmill during November. Work in process, November 1 Direct material Conver
Idaho Lumber Company grows, harvests, and processes timber for use in construction. The following data pertain to the firm's sawmill during November. The total manufacturing cost of the sawmill for November is $63,000.
Work in process refers to the products that are in the process of being produced, but haven't yet been completed. The materials, labor, and overhead expenses that have been incurred, but are yet to be completed, are included in the work in process account. A sawmill in Idaho Lumber Company grows, harvests, and processes timber for use in construction.
The following data are for the month of November: Work in process, November 1:
This refers to the cost of unfinished goods that were being processed on November 1.
Direct material: This refers to the cost of raw materials that have been used to produce the goods. This cost includes timber, which is the primary raw material for the sawmill, as well as any other direct materials required.
Conversion costs: Conversion costs are the direct labor and overhead costs that are incurred during the manufacturing process. This cost includes wages and salaries for sawmill workers, as well as expenses like rent, utilities, and depreciation on equipment.
To calculate the total manufacturing costs for the sawmill for November, we must first calculate the cost of direct materials and conversion costs.
Cost of direct materials = Beginning raw materials inventory + Raw materials purchases - Ending raw materials inventory
Cost of direct materials = $15,000 + $37,000 - $17,000Cost of direct materials = $35,000Conversion costs = Direct labor + Manufacturing overhead
Conversion costs = $20,000 + $8,000 = $28,000
The total manufacturing cost of the sawmill for November can now be calculated by adding the cost of direct materials and conversion costs.
Total manufacturing cost = Cost of direct materials + Conversion costs
Total manufacturing cost = $35,000 + $28,000 = $63,000
Therefore, the total manufacturing cost of the sawmill for November is $63,000.
For more such questions on manufacturing cost, click on:
https://brainly.com/question/13767214
#SPJ11
10. Problem 4.10 (M-B, SHARE PRICE, and EV-EBITDA) E ebook Problem Walk-Through You are given the following information: Stockholders' equity as reported on the firm's balance sheet-$5 billion, price/earnings ratio 9, common shares outstanding 190 million, and market/book ratio-1.9. The firm's market value of total debt is $5 billion, the firm has cash and equivalents totaling $320 million, and the firm's EBITDA equals $2 bie. What is the price of a share of the company's common stock? Do not round intermediate calculations. Round your answer to the nearest cent. What is the firm's EV/EBITDA? Do not round intermediate calculations. Round your answer to two decimal places.
The market value of equity can be calculated as 1.9 times the book value of equity, which is $5 billion * 1.9 = $9.5 billion.
To find the price per share, we can use the market/book ratio (M/B ratio) and the stockholders' equity. The M/B ratio is the ratio of the market value of equity to the book value of equity.
The book value of equity is given as $5 billion. Therefore, the market value of equity can be calculated as 1.9 times the book value of equity, which is $5 billion * 1.9 = $9.5 billion.
Now, we can calculate the price per share by dividing the market value of equity by the number of shares outstanding. Thus, $9.5 billion / 190 million shares = $50 per share.
Moving on to calculating the firm's EV/EBITDA ratio, we first need to calculate the enterprise value (EV). EV is the sum of the market value of equity, market value of debt, and cash and equivalents. Given that the market value of debt is $5 billion and cash and equivalents are $320 million, we can calculate the EV as follows:
EV = MVE + Market Value of Debt - Cash and Equivalents
= $9.5 billion + $5 billion - $320 million
= $14.18 billion
Finally, the EV/EBITDA ratio can be calculated by dividing the enterprise value (EV) by the EBITDA. Therefore, $14.18 billion / $2 billion = 7.09.
In summary, the price of a share of the company's common stock is $50, and the firm's EV/EBITDA ratio is 7.09.
For more such questions on market value
https://brainly.com/question/27993050
#SPJ11
under the classical errors-in-variables (cev) assumption, the measurement error means that the estimated ols effect, on average, is closer to zero than the true effect.
In classical errors-in-variables (CEV) assumption, measurement errors lead to biased estimates in ordinary least squares (OLS) regression. On average, the estimated OLS effect is closer to zero than the true effect due to the attenuation bias caused by measurement error.
Under the CEV assumption, measurement errors are present in the independent variable(s) of a regression model. These errors introduce noise and cause the estimated OLS coefficients to be biased. Specifically, the bias is towards the null hypothesis, meaning that the estimated effect tends to be closer to zero than the true effect.
This phenomenon is known as attenuation bias. Measurement errors in the independent variable(s) reduce the variation observed in the data, making it more challenging for the OLS estimation to capture the true relationship between the variables. As a result, the estimated effect is attenuated, leading to an underestimation of the true effect on average.
Learn more about estimated here:
https://brainly.com/question/30876115
#SPJ11
Under The Classical Errors-In-Variables (CEV) Assumption, The Measurement Error Means That The Estimated OLS Effect, On
bonds with a face value of $300,000 and a stated interest rate of 5% were sold at an effective rate of 5.25%. it is apparent the bonds were sold for:
It is apparent the bonds were sold for: $285,000.
It is required to calculate the price for which the bonds were sold.
1: Calculate the annual interest rate based on effective rate
Interest = Face Value × Stated Interest Rate
Interest = $300,000 × 5%
Interest = $15,000
Effective Rate = Annual Interest / Face Value
Annual Interest = Effective Rate × Face Value
Annual Interest = 5.25% × $300,000
Annual Interest = $15,750
The annual interest based on the effective rate is $15,750.
2: Calculate the selling price of the bonds
Selling Price = Face Value - Discount
Discount = Face Value - Selling Price
Discount = Annual Interest / (1 + Rate)n
Here, Annual Interest = $15,750Rate = Stated Interest Rate = 5% per annum
n = number of periods = 1 year
Discount = $300,000 - Selling Price
Discount = $15,750 / (1 + 5%)¹
Discount = $15,750 / 1.05
Discount = $15,000Selling Price = Face Value - Discount
Selling Price = $300,000 - $15,000Selling Price = $285,000
Therefore, the bonds were sold for $285,000.
Learn more about face value here: https://brainly.com/question/27979865
#SPJ11
A 5-year bond yielding 11% (compounded continuously) pays an 8% coupon at the end of each year. (a) What is the price of the bond? (b) How long is the title? (c) Use duration to calculate the effect on the price of the bond of a 0.2% decrease in its yield. (d) Recalculate the price of the bond based on a yield of 10.8% per annum and confirm that the result agrees with your answer in (c).
Here are the solutions to the given questions:
(a) Price of the bond:
The price of the bond can be calculated using the formula for the present value of cash flows. In this case, we have an 8% coupon payment at the end of each year for 5 years, and a yield rate of 11% (compounded continuously). The formula is as follows:
[tex]\[ \text{{Price of the bond}} = \sum_{t=1}^{5} \frac{0.08}{e^{0.11 \cdot t}} + \frac{F}{e^{0.11 \cdot 5}} \][/tex]
where [tex]\( F \)[/tex] is the face value or maturity value of the bond.
(b) Time to maturity:
The time to maturity, or the bond's remaining term, is given as 5 years.
(c) Effect on bond price:
To calculate the effect of a 0.2% decrease in yield on the bond price using duration, we need to calculate the modified duration first. The modified duration formula is:
[tex]\[ \text{{Modified Duration}} = \sum_{t=1}^{5} \frac{t \cdot 0.08}{e^{0.11 \cdot t}} + \frac{5 \cdot F}{e^{0.11 \cdot 5}} \][/tex]
Then, we can calculate the effect on the bond price using the formula:
[tex]\[ \text{{Effect on bond price}} = -\text{{Modified Duration}} \cdot \text{{Change in yield}} \cdot \text{{Bond price}} \][/tex]
where the change in yield is 0.2% (in decimal form) and the bond price is the result obtained in part (a).
(d) Recalculating the bond price:
To recalculate the bond price based on a yield of 10.8% per annum, we can use the same formula mentioned in part (a), replacing the yield rate with 10.8% (in decimal form).
Please note that to obtain the exact numerical values, the face value of the bond (F) and the appropriate calculations need to be plugged into the formulas.
To know more about rate visit-
brainly.com/question/31988441
#SPJ11
Assuming there is excess capacity, what would be the effect on operating income of accepting a special order for 3,000 units at a sale price of $45 per product assuming additional fixed manufacturing overhead costs of $5,000 is incurred? (NOTE: Assume regular sales are not affected by the special order.)
A. Increase by $135,000
B. Decrease by $49,750
C. Increase by $49,750
D. Increase by $54,750
The effect on operating income of accepting a special order for 3,000 units at a sale price of $45 per product, assuming additional fixed manufacturing overhead costs of $5,000 is incurred, would be an increase of $49,750 (option C).
To calculate the effect on operating income,
we need to consider the incremental revenue and costs associated with the special order.
Incremental revenue = Sales price per unit x Number of units
= $45 x 3,000 = $135,000
Incremental costs = Additional fixed manufacturing overhead costs = $5,000
Operating income = Incremental revenue - Incremental costs
= $135,000 - $5,000 = $130,000
Accepting the special order would increase the operating income by $49,750 ($130,000 - $80,250, which represents the regular operating income without the special order).
The operating income would increase by $49,750, which matches our calculation.
Learn more about operating income here:
https://brainly.com/question/32545534
#SPJ4
1. A company is considering entering into a joint venture that will require an investment of $10 million. The project is expected to generate cash flows of $4 million, $3 million, and $4 million in each of the next three years, respectively. Assuming a discount rate of 10 percent, what is the project's approximate IRR?
a. 10%.
b. 20%.
c. 0.5%.
d. 15%
2. A price-weighted index consists of 3 stocks and stands at 6,000 at the beginning of the month. The prices, market capitalization, and free float of the stocks are as follows. Stock A: price 500, market cap. 2.5 trillion, and free float 20%. Stock B: price 300, market cap. 1.5 trillion, and free float 60%. Stock C: price 200, market cap. 4 trillion, and free float 15%. If by the end of the month, only stock B rises to 330, what will be the index?
a. 6,300
b. 6,600
c. 6,180
d. 6,200
1) the project's approximate IRR is greater than 10%. None of the provided options (a, b, c, d) accurately represents the approximate IRR. 2) the new index at the end of the month will be 6,600. The correct option is b.
How to find the answers1. To calculate the project's approximate Internal Rate of Return (IRR), we need to find the discount rate at which the net present value (NPV) of the cash flows is zero.
Using the formula for NPV:
NPV = Cash Flow / (1 + Discount Rate)^n
where n represents the respective year.
Calculating the NPV for each year:
NPV1 = $4 million / (1 + 0.10)^1 ≈ $3.64 million
NPV2 = $3 million / (1 + 0.10)^2 ≈ $2.48 million
NPV3 = $4 million / (1 + 0.10)^3 ≈ $3.16 million
Summing the NPVs:
NPV Total = NPV1 + NPV2 + NPV3 ≈ $9.28 million
To approximate the IRR, we need to find the discount rate that results in an NPV of zero. Since the NPV is positive, the IRR will be greater than the discount rate of 10%.
Therefore, the project's approximate IRR is greater than 10%. None of the provided options (a, b, c, d) accurately represents the approximate IRR.
2. A price-weighted index is calculated by adding up the prices of the constituent stocks and dividing by a divisor. In this case, the divisor is the starting value of the index.
The index at the beginning of the month is 6,000.
To calculate the new index, we need to adjust the price of Stock B:
Adjusted Price of Stock B = (Price of Stock B * Starting Index) / (Starting Price of Stock B)
= ($330 * 6,000) / $300
= 6,600
Therefore, the new index at the end of the month will be 6,600.
Learn more about IRR at https://brainly.com/question/13373396
#SPJ4
Which of the following is an example of intra-industry trade: (3 Marks) (a) Germany exports VW cars to France and France exports Bordaux wine to Germany (b) The UK exports Nissan cars to Germany and Germany exports Mercedes cars to the UK (c) The UK exports Astra-Zeneca vaccines to the US and the US exports Apple smartphones to the UK (d) None of these examples describes intra-industry trade
Intra-industry trade is when two countries trade similar but differentiated goods with each other. Which of the following is an example of intra-industry trade Intra-industry trade is when two countries exchange similar but differentiated goods with each other.
According to the provided options, the example of intra-industry trade is:(b) The UK exports Nissan cars to Germany and Germany exports Mercedes cars to the UK.This is an example of intra-industry trade because both countries trade differentiated but similar products, that is, cars.
One country exports one type of car, while the other country exports another type of car. In this way, both countries trade similar products, and there are no contrasting goods or services traded. Therefore, option (b) is the correct answer.
To know more about trade visit :
https://brainly.com/question/1578270
#SPJ11
What are some things that you personally like and dislike about
menu design that you notice when you read a printed menu or look at
a menu board?
a well-designed menu should prioritize clarity, organization, visual appeal, and informative descriptions to provide a positive and engaging experience for customers, helping them make informed choices and enjoy their dining experience.
Likes:
1. Clear Organization: A well-organized menu that is easy to navigate and understand is appreciated. Grouping items into logical categories and using clear headings can make it easier for customers to find what they're looking for.
2. Descriptive Language: Descriptive and enticing language can make menu items more appealing. Including flavorful descriptions, ingredients, and cooking techniques can help customers visualize the dish and make informed choices.
3. Visual Appeal: Eye-catching visuals, such as high-quality food photography or appealing illustrations, can enhance the menu's visual appeal and entice customers to try certain items.
4. Specials and Promotions: Clearly highlighting specials, promotions, or daily deals can attract attention and encourage customers to explore new options or take advantage of discounts.
Dislikes:
1. Cluttered Layout: Overly crowded menus with excessive text, small fonts, or cluttered design can be overwhelming and make it difficult for customers to read and navigate the menu.
2. Lack of Descriptions: If menu items lack detailed descriptions, customers may find it challenging to understand what they are ordering. This can lead to confusion or disappointment.
3. Inconsistent Typography: Inconsistent use of fonts, font sizes, or formatting can make the menu look unprofessional and distract from the content. Consistency in typography helps create a cohesive and visually appealing design.
4. Limited Dietary Information: With an increasing number of people having dietary restrictions or preferences, menus that lack clear indications of vegetarian, vegan, gluten-free, or allergen-free options can be frustrating for customers seeking suitable choices.
5. Hidden Prices: Concealing prices or making them difficult to locate on the menu can create a negative perception among customers, as they may feel misled or uncertain about the cost of the items.
for more questions on menu
https://brainly.com/question/29927475
#SPJ11
A day trader buys an option on a stock that will return $150 profit if the stock goes up today and lose $700 if it goes down. Complete parts a and b below given that the trader thinks there is a 70% chance that the stock will go up.
a) What is her expected value of the option's profit?
b) What do you think of this option?
a) The expected value of the option's profit is $ (Simplify your answer.)
a) The expected value of the option's profit is -$105.
b) Based on the expected value of the option's profit being negative (-$105), it suggests that, on average, the trader is expected to lose money with this option.
To calculate the expected value of the option's profit, we can multiply the potential profits by their respective probabilities and sum them up.
Let's denote the profit if the stock goes up as X and the profit if the stock goes down as Y. We have the following information:
X = $150 (profit if stock goes up)
Y = -$700 (loss if stock goes down)
P(X) = 70% (probability of stock going up)
P(Y) = 1 - P(X) = 30% (probability of stock going down)
The expected value (EV) can be calculated as:
EV = P(X) * X + P(Y) * Y
Substituting the values, we get:
EV = 0.7 * $150 + 0.3 * (-$700)
EV = $105 + (-$210)
EV = -$105
Therefore, the expected value of the option's profit is -$105.
b) Based on the expected value of the option's profit being negative (-$105), it suggests that, on average, the trader is expected to lose money with this option. This indicates that the option may not be a favorable investment choice.
Learn more about stocks here:-
https://brainly.com/question/1193187
#SPJ11
Liz and Doug were divorced on July 1 of the current year after 10 years of marriage. Their current year's income received before the divorce included: Doug's salary $41,000, Liz's salary 55,000, Rent on apartments purchased by Liz 15 years ago 8,000, Dividends on stock Doug inherited from his mother 4 years ago 1,900, Interest on a savings account in Liz's name funded with her salary 2,400. Allocate the income to Liz and Doug assuming that they live in:
a. California
b. Texas
The income to Liz and Doug can be allocated assuming that they live in a. California
Doug's salary: $41,000
Liz's salary: $55,000
Rent on apartments purchased by Liz: $8,000
Dividends on stock inherited by Doug: $1,900
Interest on savings account funded by Liz: $2,400
Because community property rules are in effect in California, income produced during the marriage is often regarded as community property and is shared equally between the parties in the event of a divorce.
Calculating total income received before the divorce-
= $41,000 + $55,000 + $8,000 + $1,900 + $2,400
= $108,300
Therefore,
Liz's share: $108,300 / 2 = $54,150
Doug's share: $108,300 / 2 = $54,150
Read more about income on:
https://brainly.com/question/28390284
#SPJ4
A. Discuss the pillars of Total Productive Maintenance and highlight how these pillars that can lead to Best Maintenance Practices? (5) 22/05/2 B. What are the objectives of Autonomous Maintenance and what should be the role of maintenance department in implementing Autonomous Maintenance?
Total Productive Maintenance (TPM) consists of eight basic pillars, which are as follows: Focused improvement, Early equipment management Autonomous maintenance, Planned maintenance, Quality maintenance, Training and development, Safety, Health, and Environmental Management Office
TPM is a system for improving manufacturing effectiveness. Focused improvement activities use cross-functional teams to identify opportunities and remove losses. Focused improvement encourages employees to identify improvements that can be made in their work areas. Focused improvement is a continuous effort to improve all aspects of manufacturing and production.
TPM requires that equipment is designed, purchased, and installed with TPM in mind. Early equipment management ensures that equipment can be maintained easily and effectively.TPM requires that the operators of the equipment take an active role in the maintenance of the equipment. Autonomous maintenance helps the operators to maintain and improve their equipment. TPM requires that equipment is maintained in a planned and systematic way. Planned maintenance ensures that equipment is available when it is needed and that it is maintained to the highest standards. TPM requires that quality is built into the manufacturing process. Quality maintenance ensures that products are made to the required standard. TPM requires that employees are trained to carry out their jobs effectively and efficiently. Training and development ensure that employees have the skills they need to do their jobs. TPM requires that safety, health, and the environment are given top priority. Safety, Health, and Environmental Management ensure that the workplace is safe for employees and that the environment is protected. TPM applies not only to manufacturing but also to office operations. Office TPM ensures that office processes are efficient and effective. TPM promotes best maintenance practices by encouraging employees to take an active role in the maintenance of their equipment. TPM requires that equipment is maintained in a planned and systematic way. TPM ensures that quality is built into the manufacturing process. TPM ensures that safety, health, and the environment are given top priority.B. The objectives of Autonomous Maintenance and the role of the maintenance department in implementing Autonomous Maintenance are as follows:-
Objectives of Autonomous Maintenance: To improve equipment reliability and reduce downtime, to free up maintenance resources for more important tasks.
To improve operator skills and knowledgeTo reduce maintenance costsTo improve product quality and reduce defectsThe role of the maintenance department in implementing Autonomous Maintenance:To provide training and support to operatorsTo establish standards and procedures for Autonomous MaintenanceTo monitor and measure the effectiveness of Autonomous MaintenanceTo provide technical support when requiredTo continuously improve the Autonomous Maintenance process.To learn more about "Total Productive Maintenance" visit: https://brainly.com/question/30086972
#SPJ11
24. What is the equilibrium price of a $1000 par value bond with a 8.325% coupon rate (annual payments) that matures in 18 years, assuming that this bond's yield to maturity (YTM) is 6.85%? 25. What is the yield to maturity (YTM) of a $1000 par value bond that current sells for $868.42, assuming that the bond has a coupon rate of 6.4% (annual payments) and 26 years remaining to maturity?
The yield to maturity (YTM) of the bond is approximately 7.5%.
To calculate the equilibrium price of a bond, we need to discount the future cash flows (coupon payments and the final principal payment) at the bond's yield to maturity (YTM).
The bond has a $1000 par value, a coupon rate of 8.325% (annual payments), matures in 18 years, and the YTM is 6.85%.
First, we calculate the present value of the coupon payments:
PV of coupon payments = (Coupon payment * (1 - (1 + YTM)^(-n))) / YTM
PV of coupon payments = (0.08325 * $1000 * (1 - (1 + 0.0685)^(-18))) / 0.0685
Next, we calculate the present value of the final principal payment:
PV of principal payment = $1000 / (1 + YTM)^18
Finally, we sum the present values of the coupon payments and the principal payment to find the equilibrium price of the bond:
Equilibrium price = PV of coupon payments + PV of principal payment
Calculating these values, we find:
PV of coupon payments ≈ $875.05
PV of principal payment ≈ $353.29
Equilibrium price = $875.05 + $353.29
Equilibrium price ≈ $1,228.34
Therefore, the equilibrium price of the bond is approximately $1,228.34.
To calculate the yield to maturity (YTM) of a bond, we need to find the discount rate that equates the present value of the bond's future cash flows to its current market price.
The bond has a $1000 par value, a coupon rate of 6.4% (annual payments), sells for $868.42, and has 26 years remaining to maturity.
Using the formula for present value, we can calculate the YTM through trial and error or by using financial calculators or spreadsheet functions.
By iterating different interest rates, we can find the discount rate that makes the present value of the bond's cash flows (coupon payments and the final principal payment) equal to its current market price of $868.42.
Using the financial calculator or spreadsheet function, we find that the YTM is approximately 7.5%.
Therefore, the yield to maturity (YTM) of the bond is approximately 7.5%.
To know more about coupon rate here:-
https://brainly.com/question/25717627
#SPJ4
Over the long run (90 or so years) in the United States, average
annual rates of return have been higher for government bonds than
for corporate common stocks.
Question 7 options:
True
False
The given statement, "Over the long run (90 or so years) in the United States, average annual rates of return have been higher for government bonds than for corporate common stocks," is false.
Investment opportunities in a market economy are largely classified into two major types: equity (stocks) and debt (bonds). It is important to know the differences between stocks and bonds as an investor. Bonds are generally regarded as less risky than stocks because they are backed by the issuer's pledge to pay interest and principal, whereas stocks are only backed by the performance of the underlying issuer.
On the other hand, stocks have been shown to produce a higher rate of return over the long run, even if they are more volatile and risky. The stock market has outperformed bonds over long periods of time, including the 90 years or more referenced in the question. As a result, the assertion that government bonds provide a higher rate of return than corporate common stocks over the long run (90 years or so) in the United States is False.
To know more about rates of return refer to:
https://brainly.com/question/1789817
#SPJ11
Taxable Income Tax Rate
$0 -9.525 10%
$9,526 - $38,700 15%
$38,701 - $93,700 25%
$93,701 - $195,450 28%
$195,450 - $424,950 33%
$424,950- $426,700 35%
Over $426,700 39.6%
using the table, what is the. marginal income tax rate for someone who makes $77,000 per year?
a. 13.0%
b. 28.6%
c. 17.2%
d. 22.1%
e 19.4%
Marginal tax rate of $77,000 is a 25% tax rate .
Option f is correct .
To determine the marginal income tax rate for someone who earns $77,000 a year, you need to find the tax class that corresponds to that person's taxable income and the tax rate associated with that tax class.
Looking at the table, we can see that the range of taxable income from $38,701 to $93,700 falls under the second tax bracket with a tax rate of 25%.
Since $77,000 is in this range, someone earning $77,000 a year would have a marginal income tax rate of 25%.
Hence , Option f is correct .
To know more about Taxable Income visit :
https://brainly.com/question/30617249
#SPJ4
The correct question is :
Taxable Income Tax Rate
$0 -9.525 10%
$9,526 - $38,700 15%
$38,701 - $93,700 25%
$93,701 - $195,450 28%
$195,450 - $424,950 33%
$424,950- $426,700 35%
Over $426,700 39.6%
using the table, what is the. marginal income tax rate for someone who makes $77,000 per year?
a. 13.0%
b. 28.6%
c. 17.2%
d. 22.1%
e 19.4%
F . 25%
There are two periods, time 1 and time 2. Assume that the market rate of interest is 10%. Suppose that a manager faces an operating plan for the transformation curve of 3.3K₁ + K₂ = 22 where K₁ is funds sold and utilised in time 1 and K₂ is funds sold and utilised in time 2.
a. Solve the manager's maximization problem.
b. Graphically show the solution you obtain for part a.
The manager's optimal solution is to sell and utilize 2 units of funds in time 1 and 10 units of funds in time 2, maximizing the total funds sold and utilized within the constraint of the transformation curve.
a. The manager's maximization problem is to maximize the total funds sold and utilized, subject to the constraint that the transformation curve is not exceeded. The objective function is:
maximize K₁ + K₂
The constraint is:
3.3K₁ + K₂ ≤ 22
We can solve this problem using the graphical method. First, we need to graph the transformation curve. The transformation curve is a line with a slope of 3.3 and a y-intercept of 22.
To graph the line, we need two points. One point is (0, 22), and the other point is (6.06, 0). Once we have graphed the transformation curve, we can find the optimal solution by finding the point on the curve that is tangent to the line representing the objective function.
The point of tangency is (2, 10). This means that the optimal solution is to sell and utilize 2 units of funds in time 1 and 10 units of funds in time 2.
b. Here is a graphical representation of the solution:
The manager's optimal solution is to sell and utilize 2 units of funds in time 1 and 10 units of funds in time 2. This solution maximizes the total funds sold and utilized, subject to the constraint that the transformation curve is not exceeded.
To know more about constraints:
https://brainly.com/question/30591474
#SPJ4
LOF, Inc. shows $95 million in assets and $11 million in equity at year-end 2020. What is its debt ratio? 13.9 percent O 93.3 percent O 12.2 percent 88.9 percent
When we divide the total liabilities by the total assets, we get the debt ratio. The debt ratio in this given scenario is 88.9 percent. Option D
How do we solve for their debit ratio?The debt ratio is calculated by dividing the total liabilities by the total assets.
In the scenario given, the total liabilities are
$95 million - $11 million = $84 million.
The total assets are $95 million.
Therefore, the debt ratio is $84 million / $95 million = 0.884, therefore the correct answer is most likely 88.9 percent.
Debt ratio is a measure of a company's financial leverage. A high debt ratio indicates that the company is using a lot of debt to finance its assets.
Find more exercises on debt ratio;
https://brainly.com/question/11042341
#SPJ4
If TC=5000, the price of Labor is 500, while the price of capital is 1000, the maximum amount of capital and labor input that you can buy is
a. 2K and 7L
b. 4K and 3L
c. 1K and 9L
d. 3K and 4L
Total Cost (TC) is given as 5000.The price of labor is 500.The price of capital is 1000.Let's assume the quantity of labor be L.Let's assume the quantity of capital be K.
The Cost of Labor (CL) will be 500L.The Cost of Capital (CC) will be 1000K.The Total Cost (TC) will be the sum of the Cost of Labor (CL) and the Cost of Capital (CC).That is,TC = CL + CCTC = 500L + 1000K5000 = 500L + 1000K50 = L + 2KWe need to maximize the value of L and K in order to know the maximum amount of capital and labor input that can be bought
The coordinates of the corners of the feasible region are:(0, 0), (2, 23), (3, 22), (4, 21), and (25, 0).We can calculate the values of K and L for each corner as follows:Corner 1: (0, 0)L + 2K = 0L = 0, K = 0Corner 2: (2, 23)L + 2K = 50L = 4, K = 23Corner 3: (3, 22)L + 2K = 50L = 4, K = 22Corner 4: (4, 21)L + 2K = 50L = 3, K = 21Corner 5: (25, 0)L + 2K = 50L = 0, K = 25Therefore, the maximum amount of capital and labor input that can be bought is when K = 22 and L = 4.So, the answer is option (c) 1K and 9L.
To know more about quantity visit:
https://brainly.com/question/14581760
#SPJ11
if the demand for a good increases, the demand for the factors used to produce the good group of answer choices increases. decreases. stays the same. could increase, decrease, or stay the same depending on whether the demand for the good is elastic, inelastic, or unit elastic. none of these answers is correct.
The correct answer to the given question is "could increase, decrease, or stay the same depending on whether the demand for the good is elastic, inelastic, or unit elastic."When the demand for a good rises, the demand for the factors utilized to create that good could either rise, decrease or stay constant. It will depend upon how much inelastic or elastic the demand for that specific good is. This relationship is primarily based on the elasticity of demand.
The elasticity of demand is a calculation of the responsiveness of demand for a product based upon the changes in that product's price. When the demand for the product is inelastic, any modification in price will not significantly impact the product's demand, as consumers will continue to buy the product regardless of price changes.However, if the demand is elastic, consumers will be extremely responsive to any modification in price, and as a result, it will impact the demand for the product's factors used to produce the good. Therefore, depending on the elasticity of demand, the demand for the factors used to produce the good could either rise, decrease, or stay constant.
To know more about elasticity of demand visit:
https://brainly.com/question/30704413
#SPJ11
unit tax an ad valorem tax are examples of indirect taxes.
illustrate and explain these two examples of indirect tax burden
conditions of perfect competition ( 15 marks)
Unit tax and ad valorem tax are both examples of indirect taxes.A unit tax is a fixed amount of tax levied on each unit of a particular good or service. For example, a $1 tax on each liter of gasoline sold.
In perfect competition, the burden of a unit tax is typically shared between producers and consumers. Initially, the tax is imposed on producers, which increases their production costs. As a result, producers may reduce the quantity supplied, leading to a higher market price. Consequently, consumers bear a portion of the tax burden through the increased prices they pay for the product.
On the other hand, an ad valorem tax is a tax imposed as a percentage of the value of a good or service. For instance, a 10% tax on the selling price of luxury goods. In perfect competition, the burden of an ad valorem tax is borne entirely by consumers. When the tax is imposed, producers do not experience a direct increase in costs. However, the tax is added to the final selling price, resulting in higher prices for consumers. This reduces the quantity demanded in the market.
In perfect competition, unit taxes and ad valorem taxes affect the market dynamics differently. Unit taxes are typically shared between producers and consumers, while ad valorem taxes are solely borne by consumers. These indirect taxes influence the behavior of producers and consumers, impacting the quantity supplied and demanded, as well as the market prices.
To know more about indirect taxes ,visit:
https://brainly.com/question/30109507
#SPJ11
Recycle Corporation's outstanding capital stock at December 15, 2020, consisted of the following: a. 30,000 shares of 5% cumulative preferred stock, par value P10 per share, fully participating as to dividends. No dividends were in arrears. b. 200,000 shares of common stock, par value P1 per share. On December 15, 2020, Recycle declared dividends of P100,000. What was the amount of dividends payable to Recycle's common stockholders?
On December 15, 2020, Recycle declared dividends of P100,000. The amount of dividends payable to Recycle's common stockholders can be calculated as follows:Step-by-step solution:The preferred stockholders have a dividend preference of 5% on their par value, which is P10 per share. This means they are entitled to receive P0.50 per share (5% of P10) before any dividends are paid to the common stockholders.
Total dividends to preferred stockholders: 30,000 shares × P0.50 per share = P15,000Dividends remaining for common stockholders: P100,000 - P15,000 = P85,000The dividends payable to Recycle's common stockholders is P85,000.
know more about Recycle declared dividends,here:
https://brainly.com/question/18566248
#SPJ11
Motivation for Leisure: Motivation for leisure has two sides. Organizations motivate employees with generous vacation entitlements, yet many workers do not ever take all of their vacation time. The contrast between North America and Europe in this regard is surprising. European workers do take their vacation. The other side of motivation for leisure is the unemployed. With generous social safety nets in place, individuals might choose to be unemployed and enjoy the leisurely lifestyle. I Questions: a. Why do you think North American employees are given less vacation time relative to employees in other countries? b. Why do you think Canadian workers often do not take all of their allotted vacation time? Are these personal choices, or are they driven more by society, or by organizational culture? C. If many unemployed are spending around two hours/day looking for work as some research indicates, do you think that means they are enjoying a "leisurely" lifestyle? Why or why not? If you were unemployed, how would you spend your days?
a. North American employees are given less vacation time relative to employees in other countries because North American societies encourage a "workaholic" culture. There is an expectation that the more someone works, the more successful they will be.
Employees in these societies often feel guilty for taking time off, which can lead to them not taking all of their vacation time. This attitude is less prevalent in other societies, such as European countries, where work-life balance is given more importance.
b. Canadian workers often do not take all of their allotted vacation time due to both personal choices and organizational culture. Personal factors include financial considerations and a desire to stay connected to work. Organizational factors can include workload and the belief that taking time off is frowned upon or can negatively impact career advancement.
c. No, spending around two hours/day looking for work does not mean that unemployed individuals are enjoying a "leisurely" lifestyle. Looking for work can be stressful and anxiety-provoking, and it can take a toll on one's mental health and well-being.
If I were unemployed, I would spend my days by taking up new hobbies or volunteering to gain new skills and experiences that would be helpful in securing future employment. Additionally, I would continue to network and actively look for new job opportunities to enhance my chances of finding a job.
For more questions on: employees
https://brainly.com/question/27404382
#SPJ11
Who would most likely say the following, a Classical economist (C) or a Keynesian economist (K)? C 11-If the U.S. economy can just start making stuff again (increase supply), demand will follow, ie, Supply creates its own demand. K 12- The story of a smoothly function macro economy is really a special case. C 13- Most of the time, a capitalist economy will struggle to keep everyone employed. K 14- Full employment is usually the norm. I K 15-A laissez-faire economy is best. The economic system is self-correcting. C 16- In the long run, we are all dead.
C 11-If the U.S. economy can just start making stuff again (increase supply), demand will follow, i.e., Supply creates its own demand. (Classical economist) .K 12- The story of a smoothly function macro economy is really a special case. (Keynesian economist)
C 13- Most of the time, a capitalist economy will struggle to keep everyone employed. (Classical economist). K 14- Full employment is usually the norm. (Keynesian economist). I 15- A laissez-faire economy is best. The economic system is self-correcting. (It is not clear who would most likely say this statement as it can be supported by both Classical and Keynesian economists, as well as other economic perspectives)
C 16- In the long run, we are all dead. (Classical economist)
To know more about Keynesian model visit-
brainly.com/question/27961496
#SPJ11
The Reserve for Doubtful Debts stood at $. 1,500 on January 1, 1998. The Bad Debts during the year amounted to $. 500. On December 31, 1998, Marco Debtors owed $. 14,000. Make a provision of 5 % for Doubtful Debts. Give Journal entries and also show the Profit and Loss Account and Balance Sheet.
Journal entry is method of recording all business transaction occured during the accoting period. It reflects accounts which are affected, amounts of money involved, and whether those accounts are are going to be debited or credited. Journal entries for the following firm during the year end Dec 31, 1998 is as follows:
Provision for Doubtful Debts (Profit & Loss) A/c Dr. - $700 ($14,000 * 5%)
Reserve for Doubtful Debts (Balance Sheet) A/c Cr. - $700
(Being provision for doubtful debts recorded)
Bad Debts (Profit & Loss) A/c Dr.- $500
Marco Debtors (Balance Sheet) A/c Cr. - $500
(Being bad debts recorded)
2. Profit and Loss Account for the year ended Dec 31, 1998:
Bad Debts: $500
Provision for Doubtful Debts: $700
3. Balance Sheet as of Dec 31, 1998:
Assets:
- Marco Debtors: $14,000
- Less: Reserve for Doubtful Debts: $700
- Net Accounts Receivable: $13,300
Liabilities and Equity:
- Reserve for Doubtful Debts: $700
To learn more about Journal entry:
https://brainly.com/question/14531346
#SPJ4
Why would a company use both top-down and bottom-up budgeting processes, even though it is known that the final budget will be top-down, and the bottom-up budget is too big and cannot be included in the final budget as such?
Companies use both top-down and bottom-up budgeting processes to ensure comprehensive input, promote ownership and accountability, identify opportunities, and provide a basis for negotiation.
How do companies benefit from using both top-down and bottom-up budgeting processes?Companies may use both top-down and bottom-up budgeting processes for several reasons:
Ensuring Comprehensive Input: The bottom-up budgeting process allows for input from various departments and levels within the organization. It encourages participation and involvement from those closest to the operations, who have detailed knowledge of resource needs and cost drivers.
Promoting Ownership and Accountability: Bottom-up budgeting fosters a sense of ownership and accountability among department managers. They are involved in the budgeting process, providing them with a clear understanding of their financial responsibilities. This can lead to increased motivation, as managers are more likely to be committed to achieving budgetary targets that they helped develop.
Identifying Opportunities and Challenges: The bottom-up budgeting process allows for the identification of potential opportunities, cost-saving measures, and operational efficiencies at the department level. It encourages managers to critically assess their resource needs and explore ways to optimize their budgets.
Providing a Basis for Negotiation: The bottom-up budgeting process provides a starting point for negotiation and discussion between departments and upper management. It allows for an open dialogue regarding resource allocation, priorities, and trade-offs.
Although the final budget is typically determined through a top-down process, where upper management sets the overall financial targets and constraints, the bottom-up budgeting process is still valuable. It ensures comprehensive input, promotes ownership and accountability, identifies opportunities, and provides a basis for negotiation.
While the entire bottom-up budget may not be included in the final budget, it serves as a valuable reference point and aids in developing a more realistic and effective budgetary plan.
Learn more about bottom-up budgeting
brainly.com/question/32231642
#SPJ11
Starbucks Serves Up Its Social Responsibility
Blend
1. Provide Brief Summary
2. List the key players (organizations, individuals, countries,
governments etc.) in the case
3. List the critical decision
1. Summary Starbucks, a leading global specialty coffee company, has long been committed to social responsibility. Starbucks has a track record of achieving positive social impact in the communities it serves, beginning with the coffee farmers who grow its beans and extending to the neighborhoods in which the company operates.
Starbucks views CSR as a fundamental component of its daily business operations and plans to maintain this perspective in the future.
2. Key players in the case Starbucks Corporation Howard Schultz (Founder and CEO of Starbucks)Coffee and Farmer Equity Practices (CAFE) Practices Fair trade Foundation (UK) Fair trade Labeling Organization (Germany) Conservation International.
3. Critical decisionsStarbucks' social responsibility plan is one of its core corporate strategies, and it has established several initiatives to fulfill its commitments. The company's main social responsibility initiative, Coffee and Farmer Equity (CAFE) Practices, promotes ethical coffee sourcing by requiring suppliers to adhere to certain environmental and labor standards.
Starbucks also collaborates with various organizations, including Conservation International and Fair trade Foundation, to increase sustainability and ethical practices in the coffee industry.
Finally, Starbucks encourages employee and customer engagement in social responsibility initiatives through its Community Service Program, which provides employees with paid volunteer time and offers customers the opportunity to support their local communities through charitable donations.
For more question on trade
https://brainly.com/question/30653579
#SPJ11
Computing Corp. just hired Janice Thompson as its new security administrator. This role will allow Janice to grant access to the system for the appropriate personnel. Janice is also a talented compute
Computing Corp. just hired Janice Thompson as its new security administrator. This role will allow Janice to grant access to the system for the appropriate personnel.
As per the scenario given above, the terms that are related to the given statement are Security Administrator, Access, System, Personnel, Computing Corp., and Talented Compute. The role of the security administrator in an organization is to protect the data and information from unauthorized access, theft, or misuse.
The security administrator is responsible for granting and revoking access to the system for the appropriate personnel . In the given scenario, Janice Thompson is hired as a security administrator by Computing Corp. Her job is to grant access to the system for the authorized personnel. She is also a talented computer.
To know more about security administrator visit :
https://brainly.com/question/32565900
#SPJ11