How are conclusions and recommendations drawn in a study? In your response, 1.1 relate to the findings 1.2 Relate to the literature review 미 [2] [3]

Answers

Answer 1

Conclusions and recommendations are significant aspects of a research study that are typically drawn from the findings and literature review.

Conclusions and recommendations are significant components of a research study.

The findings and literature review serve as critical sources in developing conclusions and recommendations.

Let's examine the process of drawing conclusions and recommendations in a research study.

Relating conclusions to the findingsThe conclusion is a final interpretation of the study's results based on the findings.

The findings section should demonstrate the variables under analysis, whether hypotheses were accepted or rejected, and any significant results obtained.

It should emphasize the implications of the findings in light of the study's original purpose or research questions.

A well-written conclusion should also provide any explanations for findings that weren't anticipated and why they are crucial.

A summary of the key points and a brief discussion of how the study contributes to the knowledge base and the research field are two other components of an effective conclusion.

Relating recommendations to the literature reviewRecommendations are the actions that researchers suggest based on the study's findings.

The researcher should tie the recommendation to the literature review in the study's final section.

The review of related literature provides the context for the study and the literature gaps that the study aims to address.

A well-written recommendation should make explicit the specific actions that stakeholders should take to apply the study's findings.

The researcher must also describe the potential benefits of implementing the recommendations and the rationale for the recommended actions.

To summarize, conclusions and recommendations are significant aspects of a research study that are typically drawn from the findings and literature review.

The researcher should provide a comprehensive summary of the study's outcomes and implications in the conclusion section.

Recommendations should be closely related to the literature review and describe the appropriate actions that stakeholders should take to apply the findings of the study.

For more questions on literature

https://brainly.com/question/32141343

#SPJ8


Related Questions

You have an order for an 8-gallon aquarium that is 20 in long and 10.5 in wide. How deep should the aquarium be?

Answers

Answer:

8.8

Step-by-step explanation:

What is the answer to this question?

Answers

Answer:

what should i answer?

Step-by-step explanation:

Write a negative integer and a positive integer whose sum is –5.

Answers

Answer:

-18+ 13

-6 + 1

-20 + 15

-7 + 2

Step-by-step explanation:

sound travels at 320.29 meters per second at sea level. how many miles will sound travel at sea level in 7 seconds?

round off the answer to the nearest thousandths

thx in advance

Answers

Answer:

1.393 miles

Explanation:

320.29 × 7 = 2,242.03 m = 1.39313285413187 miles ≈ 1.393

plzzzz help me plzzzzz z z z zz z !!!!!!!!!

Answers

Answer:

circle: ( 1, 0.5 )

square: ( 4.5, 3.5 )

triangle: ( 0, 2.5 )

Step-by-step explanation:

Tossing of a fair coin infinitely many times. Define (1, if head shows, X(t)= for nT

Answers

Tossing of a fair coin infinitely many times. The process X(t) can be defined as follows:

- X(t) = 1 if a head shows up at time t, where t = nT for some positive integer n.

- X(t) = 0 if a tail shows up at time t.

In the given scenario, we are considering the tossing of a fair coin infinitely many times. We want to define a process X(t) that represents the outcome of each toss at different time points.

The process X(t) is defined as 1 when a head shows up at time t, where t is a multiple of T (the fixed time interval between tosses). In other words, X(t) takes the value 1 when t is of the form nT, where n is a positive integer.

Conversely, X(t) is defined as 0 when a tail shows up at time t. This includes all time points that are not of the form nT.

The process X(t) is a representation of the outcome of the coin tosses over time. It takes the value 1 when a head shows up at time t = nT for some positive integer n, and 0 when a tail shows up. This process allows us to track the occurrences of heads at specific time intervals in the infinite sequence of coin tosses.

To know more about Tossing , visit

https://brainly.com/question/31393235

#SPJ11

T=21and u =4 what is \sqrt(t+U)

Answers

Answer: 5

Step-by-step explanation: 21 + 4 = 25

square root of 25  = 5

Answer and Step-by-step explanation:

T = 21

U = 4

[tex]\sqrt{ 21 + 4} \\\\\\\sqrt{25} \\\\\\5[/tex]

5 is the answer to the expression.

#teamtrees #PAW (Plant And Water)

nCk means the number of ways we can choose k objects from n objects

Find:

∑10k=010Ck

Answers

The sum of the binomial coefficients nCk, where n ranges from 0 to 10 and k varies from 0 to 10, is equal to [tex]2^10[/tex], which is 1024.

The expression ∑10k=010Ck represents the sum of the binomial coefficients for all possible values of k from 0 to 10. The binomial coefficient nCk, also known as "n choose k," represents the number of ways we can choose k objects from a set of n objects.

In this case, we are summing up the binomial coefficients for n ranging from 0 to 10. For each value of n, we calculate the binomial coefficient nCk for k values ranging from 0 to 10. The formula to calculate the binomial coefficient is n! / (k!(n-k)!), where "!" denotes the factorial operation.

When we substitute the values into the formula, we find that all the binomial coefficients are 1, except when k equals 0 or n. In these cases, the binomial coefficient is equal to 1, as there is only one way to choose 0 objects or all n objects from a set.

Since there are 11 values of n (0 to 10), and for each n there is one non-zero binomial coefficient, the sum of all the binomial coefficients from 0 to 10 is equal to 11. Therefore, the expression simplifies to ∑10k=010Ck = 11.

So, the sum of all the binomial coefficients ∑10k=010Ck is equal to 11, which means we have 11 ways to choose k objects from a set of 10 objects. Another way to interpret this is that the sum of the binomial coefficients represents the number of subsets of a set with 10 elements, which is 11. However, if we are considering the case of choosing 0 to 10 objects, the sum becomes 2^10, which is equal to 1024.

Learn more about binomial coefficients here:

https://brainly.com/question/29960733

#SPJ11

A half-century ago, the mean height of women in a particular country in their 20s was 62.9 inches. Assume that the heights of today's women in their 20s are approximately normally distributed with a standard deviation of 2.87 inches.
If the mean height today is the same as that of a half-century ago, what percentage of all samples of 21 of today's women in their 20s have mean heights of at least 64.76 inches?
About _____ % of all samples have mean heights of at least 64.76 inches.

Answers

Approximately 0.11 percent of all samples have mean heights of at least 64.76 inches.

Given: 50 years prior, the mean level of ladies in a specific country in their 20s was 62.9 inches. With a standard deviation of 2.87 inches, women in their 20s today have heights that are roughly typical. We must determine the proportion of all 21 samples that have mean heights of at least 64.76 inches among today's women in their 20s. Bit by bit clarification:

Let μ be the mean level of ladies in this day and age and allow n to be the example size. We can find the likelihood of an example mean being more prominent than or equivalent to 64.76 inches utilizing the z-score recipe, as follows: z = (x - μ)/(σ/√n) = (64.76 - 62.9)/(2.87/√21) = 3.06The likelihood that an example of 21 ladies will have a mean level more noteworthy than or equivalent to 64.76 inches is equivalent to the likelihood that a typical irregular variable Z is more noteworthy than or equivalent to 3.06.

This probability is approximately 0.0011, or 0.11 percent, according to a typical normal table or calculator. This means that approximately 0.11 percent of all samples have mean heights of at least 64.76 inches.

To know more about standard deviation  refer to

https://brainly.com/question/29115611

#SPJ11

Which of the following is true?

Answers

Answer:

option B should be correct

A sample of data with n = 66 observations is used to run a multiple regression with 7 independent variables.
If this data set has SST = 2326.9523 and SSR = 1632.8843, what is the value of the F-statistic for the test of overall significance of this regression relationship?

Answers

The value of the F-statistic for the test of overall significance of this regression relationship is approximately 11.245.

Given:SST = 2326.9523 SSR = 1632.8843 Independent variables = 7

Observations = 66Formula used:F = (SSR/K) / (SSE / (n-K-1))

Where SSR = Regression sum of squares SSE = Error sum of squaresK = Number of independent variables n = Number of observations

To calculate the F-statistic, we first need to calculate SSE which is given by:SSE = SST - SSR = 2326.9523 - 1632.8843 = 693.068

The degrees of freedom for the regression are K and the degrees of freedom for the error term are n - K - 1 = 66 - 7 - 1 = 58

The value of the F-statistic is given by:F = (SSR/K) / (SSE / (n-K-1))= (1632.8843/7) / (693.068 / 58)= 11.245

Therefore, the value of the F-statistic for the test of overall significance of this regression relationship is approximately 11.245.

Know more about F-statistic here,

https://brainly.com/question/32237714

#SPJ11

At LaGuardia Airport for a certain nightly flight, the probability that it will rain is
0.09 and the probability that the flight will be delayed is 0.18. The probability that it
will rain and the flight will be delayed is 0.04. What is the probability that the flight
would be delayed when it is not raining? Round your answer to the nearest
thousandth.

Answers

Answer:

A, The probability that it will rain is 0.09 and the probability that the flight will be delayed is 0.18.

Step-by-step explanation:

Answer: 0.154

Step-by-step explanation:

Yoshi is a basketball player who likes to practice by attempting the same three-point shot until he makes the shot. His past performance indicates that he has a 30 % 30%30, percent chance of making one of these shots. Let X XX represent the number of attempts it takes Yoshi to make the shot, and assume the results of each attempt are independent. Is X XX a binomial variable? Why or why not?

Answers

Answer:

There is no fixed number of trials, so X is not a binomial variable

Step-by-step explanation:

mama

There is no fixed number of trials, so X is not a binomial variable.

What is a binomial variable in statistics?

This is a specific kind of discrete random variable. A binomial random variable counts how regularly a specific event occurs in a fixed variety of attempts or trials.

What is a binomial data example?

The binomial is a form of distribution that has possible effects (the prefix “bi” method two, or twice). as an example, a coin toss has only viable effects: heads or tails, and taking a check may want to have viable outcomes: pass or fail. A Binomial Distribution indicates both success and failure.

Learn more about Binomial Distribution here: https://brainly.com/question/24756209

#SPJ2

A horse runs three races. The first is 2 miles, the second is 1,300 yards, and the last is 850 yards. How many yards does the horse run in all

Answers

Answer:

5670 yards

Step-by-step explanation:

Length of first race = 2 miles

Since, 1 mile = 1760 yards

Therefore, 2 miles = 1760 × 2

                               = 3520 yards

Length of second race = 1300 yards

Length of third race = 850 yards

Total distance to be run by the horse = 3520 + 1300 + 850

                                                              = 5670 yards

Compare lengths. Select >, <, or = .
900 cm _ 9 m

Answers

Answer:

900 cm = 9 m

Step-by-step explanation:

9 m = 900 cm

Therefore, 9 m equals 900 cm.

Point E is located at (-8,7). Point F is located at (9,7).
What is the distance, in units, between point E and point F?

Answers

Answer:

18 units to the right.

Step-by-step explanation:

Hope this helps!

A five-year project that will require $3,200,000 for new fixed assets will be depreciated straight-line to a zero book value over six years. At the end of the project, the fixed assets can be sold for $640,000. The tax rate is 32% and the required rate of return is 13.30%. What is the amount of the aftertax salvage value?

Answers

As per the given values, the after-tax salvage value is $435,200.

Amount required = $3,200,000

Time = 6 years

Calculating the accumulated depreciation -

Amount/ Number of years

=  $3,200,000 / 6

= $533,333.3.

Calculating the accumulated depreciation at project end -

= 6 x $533,333.33

= $3,200,000.

Calculating the book value of the fixed assets -

Book value = Cost of fixed assets - Accumulated depreciation

= $3,200,000 - $3,200,000

= $0

Calculating the taxable gain or loss on the sale of the fixed assets -

Taxable gain/loss = Selling price - Book value

= $640,000 - $0

= $640,000

Calculating the tax liability -

Tax liability = Tax rate x Taxable gain

= 0.32 x $640,000

= $204,800

Calculating the after-tax salvage value -

After-tax salvage value = Selling price - Tax liability

= $640,000 - $204,800

= $435,200

Read more about salvage value on:

https://brainly.com/question/31441389

#SPJ4

A system of linear equations is graphed.
Which ordered pair is the best estimate for the solution to the system?
(−4, 2 1/2)
(0, −2)
(−4 1/2, 2 1/2)
(0, 7)

Answers

The best estimate for the solution to the system of linear equations among the given ordered pairs is (-4, 2 1/2).

In the context of a system of linear equations, the solution represents the values of the variables that satisfy all the equations simultaneously. To determine the best estimate for the solution, we need to evaluate each ordered pair and see which one satisfies the given system.

By substituting the values of the ordered pairs into the equations of the system, we can determine if they satisfy the equations or not. Among the given options, when substituting (-4, 2 1/2) into the system of linear equations, it is likely to result in a solution that satisfies all the equations.  Therefore, it is important to consider the specific equations and the context of the problem to determine the best estimate for the solution.

Learn more about ordered pairs here:

https://brainly.com/question/28874341

#SPJ11

Pre-image ABCD was dilated to produce image A'B'C'D' What is the scale factor from the pre-image to the image?

Answers

Answer:

The answer is 3/4

Step-by-step explanation:

Integrate the function y = f(x) between x = 2.0 to x = 2.8, using Simpson's 1/3 rule with 6 strips. Assume a = 1.2, b = -0.587
y = ax2/(b+ x2)

Answers

Using Simpson's [tex]\frac{1}{3}[/tex] rule with 6 strips, the approximate value of the integral ∫[2.0, 2.8] f(x) dx is -3.8492.

To integrate the function [tex]\begin{equation}y = f(x) = \frac{ax^2}{b + x^2}[/tex] using Simpson's 1/3 rule, we need to divide the interval [2.0, 2.8] into an even number of strips (in this case, 6 strips). The formula for approximating the integral using Simpson's 1/3 rule is as follows:

[tex]\begin{equation}\int_a^b f(x) dx \approx \frac{h}{3} \left[ f(x_0) + 4f(x_1) + 2f(x_2) + 4f(x_3) + ... + 2f(x_{n-2}) + 4f(x_{n-1}) + f(x_n) \right][/tex]

Where:

h is the width of each strip ([tex]\begin{equation}h = \frac{b - a}{n}[/tex], where n is the number of strips)

[tex]x_0[/tex] is the lower limit (2.0)

[tex]x_n[/tex] is the upper limit (2.8)

f(xi) represents the function evaluated at each strip's midpoint

Given the values of a = 1.2 and b = -0.587, we can proceed with the calculations.

Step 1: Calculate the width of each strip (h):

[tex]\begin{equation}h = \frac{b - a}{n} = \frac{-0.587 - 1.2}{6} = \frac{-1.787}{6} \approx -0.2978[/tex]

Step 2: Calculate the function values at each strip's midpoint:

x₀ = 2.0

x₁ = x₀ + h = 2.0 + (-0.2978) = 1.7022

x₂ = x₁ + h = 1.7022 + (-0.2978) = 1.4044

x₃ = x₂ + h = 1.4044 + (-0.2978) = 1.1066

x₄ = x₃ + h = 1.1066 + (-0.2978) = 0.8088

x₅ = x₄ + h = 0.8088 + (-0.2978) = 0.511

x₆ = x₅ + h = 0.511 + (-0.2978) = 0.2132

xₙ = 2.8

Step 3: Evaluate the function at each midpoint:

[tex]f(x_0) = \frac{1.2 \times 2^2}{-0.587 + 2^2} = \frac{4.8}{3.413} \approx 1.406 \\\\f(x_1) = \frac{1.2 \times 1.7022^2}{-0.587 + 1.7022^2} \approx 2.445 \\\\f(x_2) = \frac{1.2 \times 1.4044^2}{-0.587 + 1.4044^2} \approx 2.784 \\\\f(x_3) = \frac{1.2 \times 1.1066^2}{-0.587 + 1.1066^2} \approx 2.853 \\\\[/tex]

[tex]f(x_4) = \frac{1.2 \times 0.8088^2}{-0.587 + 0.8088^2} \approx 2.455 \\f(x_5) = \frac{1.2 \times 0.511^2}{-0.587 + 0.511^2} \approx 1.316 \\f(x_6) = \frac{1.2 \times 0.2132^2}{-0.587 + 0.2132^2} \approx 0.29[/tex]

Step 4: Apply Simpson's 1/3 rule formula:

[tex]\begin{equation}\int_{2.0}^{2.8} f(x) dx \approx \frac{h}{3} \left[ f(x_0) + 4f(x_1) + 2f(x_2) + 4f(x_3) + 2f(x_4) + 4f(x_5) + f(x_6) \right][/tex]

[tex]\begin{equation}\approx \frac{-0.2978}{3} \left[ 1.406 + 4(2.445) + 2(2.784) + 4(2.853) + 2(2.455) + 4(1.316) + 0.29 \right][/tex]

[tex]\begin{equation}= \frac{-0.2978}{3} \left[ 1.406 + 9.78 + 5.568 + 11.412 + 4.91 + 5.264 + 0.29 \right][/tex]

≈ (-0.09926) * 38.63

≈ -3.8492

Therefore, the approximate value of the integral ∫[2.0, 2.8] f(x) dx using Simpson's 1/3 rule with 6 strips is approximately -3.8492.

To know more about the Simpson's 1/3 rule refer here :

https://brainly.com/question/30639632#

#SPJ11








Q2 Solve the following initial value problem 1 y" + 4y = r - sin 3x y(0) = 1, (0) by using method of undetermined coefficients. (10 marks)

Answers

The given initial value problem using the method of undetermined coefficients. The final solution to the initial value problem is y = cos(2x) + x - (1/9)*sin(3x).

To solve the given initial value problem, we begin by finding the general solution to the associated homogeneous equation. The homogeneous equation is given by y'' + 4y = 0. The characteristic equation is obtained by substituting y = e^(mx) into the equation, resulting in the quadratic equation m^2 + 4 = 0. Solving this equation yields two distinct roots: m_1 = 2i and m_2 = -2i. Thus, the general solution to the homogeneous equation is y_h = c_1cos(2x) + c_2sin(2x), where c_1 and c_2 are arbitrary constants.

Next, we assume a particular solution in the form of y_p = Ax + B + Csin(3x) + Dcos(3x), where A, B, C, and D are undetermined coefficients. We substitute this particular solution into the given differential equation and solve for the coefficients. Comparing the coefficients of like terms, we find A = 0, B = 1, C = -1/9, and D = 0.

The particular solution is y_p = x - (1/9)*sin(3x), and the complete solution is obtained by adding the particular solution to the homogeneous solution: y = y_h + y_p. Applying the initial condition y(0) = 1, we find that c_1 = 1 and c_2 = 0. Therefore, the final solution to the initial value problem is y = cos(2x) + x - (1/9)*sin(3x).

Learn more about coefficient here:

https://brainly.com/question/29993529

#SPJ11

30 POINTS!!! HELP!!!!

Answers

I think its f(0) = 3
Thats the only one that sounds true but not sureee

Find the total amount owed, to the nearest cent, for the following simple interest loans.
(Step-by-step explanation)

a. $525 loan at 9.9% interest for 6 months

b. $12,460 loan at 5.6% interest for 30 months

Answers

a. The total amount owed for the $525 loan at 9.9% interest for 6 months is approximately $556.19 when rounded to the nearest cent.

b. The total amount owed for the $12,460 loan at 5.6% interest for 30 months is approximately $33,504.80 when rounded to the nearest cent.

a. To calculate the total amount owed for the $525 loan at 9.9% interest for 6 months, we can use the formula for simple interest:

Total amount owed = Principal + (Principal × Interest Rate × Time)

Given:

Principal (P) = $525

Interest Rate (R) = 9.9% = 0.099 (converted to decimal)

Time (T) = 6 months

Plugging these values into the formula, we get:

Total amount owed = $525 + ($525 × 0.099 × 6)

Simplifying the equation:

Total amount owed = $525 + ($31.185)

Total amount owed = $556.185

Therefore, the total amount owed for the $525 loan at 9.9% interest for 6 months is approximately $556.19 when rounded to the nearest cent.

b. To calculate the total amount owed for the $12,460 loan at 5.6% interest for 30 months, we'll follow the same formula for simple interest:

Total amount owed = Principal + (Principal * Interest Rate * Time)

Given:

Principal (P) = $12,460

Interest Rate (R) = 5.6% = 0.056 (converted to decimal)

Time (T) = 30 months

Plugging these values into the formula, we get:

Total amount owed = $12,460 + ($12,460 * 0.056 * 30)

Simplifying the equation:

Total amount owed = $12,460 + ($21,044.8)

Total amount owed = $33,504.8

Therefore, the total amount owed for the $12,460 loan at 5.6% interest for 30 months is approximately $33,504.80 when rounded to the nearest cent.

for such more question on total amount

https://brainly.com/question/25109150

#SPJ8

If Θˆ 1 and Θˆ 2 are unbiased estimators of the same parameter θ, what condition must be imposed on the constants k1 and k2 so that k1Θˆ 1 + k2Θˆ 2 is also an unbiased estimator of θ?

Answers

The condition imposed on the constants k₁ and k₂ for k₁Θ⁻₁ + k₂Θ⁻₂ to be an unbiased estimator of θ is that their sum must equal 1.

For k₁Θ⁻₁ + k₂Θ⁻₂ to be an unbiased estimator of θ, its expected value should be equal to θ. In other words, we want to find the conditions on k₁ and k₂ such that E(k₁Θ⁻₁ + k₂Θ⁻₂) = θ.

Given that Θ⁻₁ and Θ⁻₂ are unbiased estimators of θ, we have:

E(Θ⁻₁) = θ

E(Θ⁻₂) = θ

Now, let's calculate the expected value of k₁Θ⁻₁ + k₂Θ⁻₂:

E(k₁Θ⁻₁ + k₂Θ⁻₂) = k₁E(Θ⁻₁) + k₂E(Θ⁻₂)

Since E(Θ⁻₁) = θ and E(Θ⁻₂) = θ, we can substitute these values into the equation:

E(k₁Θ⁻₁ + k₂Θ⁻₂) = k₁θ + k₂θ

To make sure this expression is equal to θ, we need:

k₁θ + k₂θ = θ

This implies that k₁ + k₂ = 1. Therefore, the condition imposed on the constants k₁ and k₂ for k₁Θ⁻₁+ k₂Θ⁻₂ to be an unbiased estimator of θ is that their sum must equal 1.

Learn more about Unbiased Estimator of θ at

brainly.com/question/31471516

#SPJ4

What is the difference between 3/4 and one

Answers

Answer:

3/4 is 0.75 and 1 is 1

Step-by-step explanation:

:\

Show explicitly that the following functions: (a) (x+at)², (b) 2e-(x-at) ², 7 satisfy the wave equation J²u(x, t) Ət² = (c) 5 sin[3 (x - at)] + (x + at). ₂d²u(x, t) dx²

Answers

Each satisfies the wave equation.

We are given the functions as follows:

(a) (x+at)², (b) 2e-(x-at) ², 7 satisfy the wave equation J²u(x, t) Ət² = (c) 5 sin[3 (x - at)] + (x + at).

₂d²u(x, t) dx²

Let us prove that they satisfy the wave equation using the formula of the wave equation. Wave equation is given by;

J²u(x, t) Ət² = ₂d²u(x, t) dx²

Applying the partial derivative to

(a) with respect to time, t, we obtain:

2a(x+at)

The second partial derivative with respect to x is as follows:

2a

By substituting these results into the wave equation, we have:

J²u(x, t) Ət² = ₂d²u(x, t) dx²

(2a(x+at)) = 2aJ²u(x, t) Ət² = 2a

Ət² = 1/J².

Thus, (a) satisfies the wave equation.  

For part (b), let us begin by taking the partial derivative of the function with respect to time, t. This is given by:

-4a e^-(x-at) ²

By taking the second partial derivative with respect to x, we get:4a e^-(x-at) ²

Similar to above, we substitute these results into the wave equation as follows:

J²u(x, t) Ət² = ₂d²u(x, t) dx²

-4a e^-(x-at) ² = 4aJ²u(x, t) Ət² = -4a e^-(x-at) ²/J²

Ət² = -1/J²e^-(x-at) ².

Thus, (b) satisfies the wave equation.

For part (c), let us calculate the partial derivative with respect to t as follows:

5a cos[3(x-at)] + a

The second partial derivative with respect to x is given by:-

15a sin[3(x-at)]

By substituting these results into the wave equation, we have:

J²u(x, t) Ət² = ₂d²u(x, t) dx²

(5a cos[3(x-at)] + a) = -15a

sin[3(x-at)]J²u(x, t) Ət² = -15a

sin[3(x-at)]/(5a cos[3(x-at)] + a)

Ət² = -3 sin[3(x-at)]/(cos[3(x-at)] + 1/5).

Thus, (c) satisfies the wave equation.

Learn more about wave equation here:

https://brainly.com/question/17013458

#SPJ11

Put all equations into y= and see which have matching graphs.

Answers

Answer:

I don't see any equations.

Plz help been stuck for a while now

Answers

13.5 is the answer !

Describe how to find the sale price of an item that has been discounted 15%.

Multiply the original price by
% to find the sale price.

Answers

Multiply the discount percent to the marked price and subtract from the marked price.

What will be the selling price?

As we know that the discount is always given on the marked price of the product.

We will take one example to understand it supposes the marked price of any object is MP= 100 and the discount =15% so to find the SP

First, find the discount amount

[tex]MP\times Discout \ percent =100\times \dfrac{15}{100} =15[/tex]

Now to find the SP subtract the discount from the MP

[tex]SP=MP-Discount[/tex]

[tex]SP=100-15=75[/tex]

So for finding SP multiply the discount percent to the marked price and subtract from the marked price.

To know more about profit and loss follow

https://brainly.com/question/19104371

help-

1. half a number, less 3, is 8
2. the area decreased by 7 is 14

Answers

Answer:

. the area decreased by 7 is 14

Other Questions
fx=x-2, state the domain and range for the function and its inverse. Write each step. How does American literature reflect and influence American society? Please no links, and the answer doesn't have to be perfect, just whatever you think. Well, I mean, it doesn't have to be PERFECT, but it shouldn't be like "Hi my name is Little Timmy, I like dogs" or something. Keep it shut, Little Timmy! (_") lol how is monarchy different from a patriarchy What allele pairs will result from this combination of alleles MmQq? ( use the 13,14,23,24 strategy).A). All of these are correctB). MQ, Mq, mQ, mqC). Mq, mQ, mq, MqD). MM, mm, QQ, qq Landon is going to invest in an account paying an interest rate of 4.3%compounded continuously. How much would Landon need to invest, to thenearest hundred dollars, for the value of the account to reach $11,300 in 14years? What is the IQR of the data set below?15, 13, 25, 18, 15, 12, 10, 35, 30, 52, You have invested $2,500 in stocks. The stock increases at a rate of 5% and is compounded monthly.a.) Write a compound interest function to model the situation.b.) How much will the stock be worth in 3 years? Gavyn was thinking of a number. Gavyn doubles it, then adds 14 to get an answer of 17.2. What was the original number? briefly explain 5 software which is either free or fee Three of these fractions are equivalent: B. 12 C . 21 D. 74 30 A. . 70 Which one is the odd one out? QUESTION 3A 10 kg cement block is pulled across the floor with a force of 50 N at an angle of 30 with thehorizontal The block accelerates at 1,5 m s?3010 kg(2)31Define the term normal force3.2Draw a FORCE DIAGRAM showing ALL the forces acting on the object.3.3Calculate the magnitude of the(3)3.3.1 Normal force(5)3.3.2 Frictional force which acts on the crate(4)3.3.3 Coefficient of kinetic friction[18] PLZZ HELP DUE 7:00 Reward brainliest What is the value of A when we rewrite 3^x as A^5x the major laboratory abnormality noted in patients with pneumonia is Which of the following is true?a. All products will have higher costs under ABC than traditional costingb. High volume products will have higher costs under ABCc. High volume products will have lower costs under ABCd. Low volume products will have lower costs under ABCe. None of the above Pls quickly brainliest to the first to anwser An independent regulatory agency write statement telling something that is always true of an informational text Which action would be most appropriate for a neonate whose hemoglobin is 16 g/dl (160 g/l) immediately after birth? please help me out thank u