fx=x-2, state the domain and range for the function and its inverse. Write each step.

Answer:

17

Step-by-step explanation:

Hello There!

Once again we are going to use the distance formula to find the answer

[tex]d=\sqrt{(x_2-x_1)^2+(y_2-y_1)^2}[/tex]

This time we need to find the distance between the points (4,10) and (4,-7)

*we plug in the values into the formula)

[tex]d=\sqrt{(4-4)^2+(-7-10)^2} \\4-4=0\\-7-10=17\\d=\sqrt{0^2+(-17)^2} \\0^2=0\\-17^2=289\\\sqrt{289} =17[/tex]

so we can conclude that the distance between the points (4,10) and (4,-7) is 17 units

Answer:

3 AND 6 - 2 AND 5!

Step-by-step explanation:

hope i helped!

So I'll walk through the first 2. Then please try the other ones and let me know if you run into more problems.

5m-6

If m is equal to 7, then replace m with 7.

5(7)-6

5x7=35 so the expression is now 35-6. Solve.

35-6=29

So that was the first one.

4m+t

We just do what we do with the first problem.

4(7)+(2)

4x7=28 so the expression is 28+2.

28+2=28

---

hope it helps

p.s. When there is subtraction, add. When there is division, multiply to cancel that out. When there is multiplication, divide to cancel. etc.

Answer:

1,5(7)-6=29

2,4(7)+2=30

3,8/2=4

4,7*2=14

5,5(2)+2(7)=24

6,8*7=56

7,3(7)-5(2)=11

8,7*8/2=28

Answer:

Step-by-step explanation:0.828282 = 0.828282/1 = 8.28282/10 = 82.8282/100 = 828.282/1000 = 8282.82/10000 = 82828.2/100000 = 828282/1000000

And finally we have:

0.828282 as a fraction equals 828282/1000000

Answer:

hi

Step-by-step explanation:

Answer:

12/13

Step-by-step explanation:

Given that MN = 5, NO = 12, and MO = 13, find cos O.

Since the reference angle is P, hence;

MN is the opposite = 5

MO is the hypotenuse = 13 (longest side)

NO is the adjacent = 12

Cos O = adj/hyp

Substitute the given values

Cos O = 12/13

Hence the value of Cos O is 12/13

Answer:

75.4

Step-by-step explanation:

Hello There!

We can easily solve for the volume of the cone using this formula

[tex]V=\pi r^2\frac{h}{3}[/tex]

where r = radius and h = height

we are given that the radius had a length of 3 ft and the height has a length of 8 ft

Because we know the values all we have to do is plug them into the formula

so

[tex]V=\pi 3^2\frac{8}{3}\\3^2=9\\9\pi =28.27433388\\28.27433388*\frac{8}{3} =75.39822369[/tex]

so we can conclude that the volume of the cone is 75.39822369 ft³

Finally we round to the nearest hundredth and get that the answer is 75.4

Answer:

∠ B = 48°

Step-by-step explanation:

The sum of the 3 angles in a triangle = 180°

Subtract the sum of the 2 given angles from 180° for ∠ B

∠ B = 180° - (90 + 42)° = 180° - 132° = 48°

Given:

Three line segments have measures of 4 units, 6 units, and 8 units.

To find:

Will the segments form a triangle?

Solution:

We know that three line segments can form a triangle if the sum of two smaller sides is greater than the largest side.

Three line segments have measures of 4 units, 6 units, and 8 units. Here, the measure of the largest sides is 8 units.

The sum of two smaller sides is

[tex]4+6=10[/tex]

[tex]4+6>8[/tex]

Since the sum of two smaller sides is greater than the largest side, therefore the segments will form a triangle.

Answer:

(a) Similar polygons; scale factor is 2

(b) Similar polygons; scale factor is 1.5

Step-by-step explanation:

Given

See attachment for polygons

Required

Determine if they are similar or not

Solving (a): The triangle

The angles in both triangles show that the triangles are similar

To calculate the scale factor (k), we simply take corresponding sides.

i.e.

[tex]k = \frac{DF}{BA} = \frac{FE}{AC} = \frac{DE}{BC}[/tex]

[tex]k = \frac{6}{3} = \frac{8}{4} = \frac{10}{5}[/tex]

[tex]k = 2=2=2[/tex]

[tex]k = 2[/tex]

The scale factor is 2

Solving (b): The trapezium

The angles in both trapeziums show that the trapeziums are similar

To calculate the scale factor (k), we simply take corresponding sides.

i.e.

[tex]k = \frac{KN}{GJ}[/tex]

[tex]k = \frac{6}{4}[/tex]

[tex]k = 1.5[/tex]

The scale factor is 1.5

Solution:

Outfit         Shirt       Slacks        Tie

Outfit 1      Blue        Black         Red

Outfit 2     Blue        Grey          Red

Outfit 3    White       Black         Red

Outfit 4    White       Grey          Red

Outfit 5    Black       Black         Red

Outfit 6    Black       Grey         Red

We take the outfits 1, 2 , 5  and 6 as a subset of the sample space.

So these 1, 2, 5 and 6 consists either a blue shirt or a black shirt.

The subset consists of all the outfits that do not have a white shirt.

So the correct options are :

1. (Choice A)

The subset consists of all the outfits that do not have a white shirt.

2. (Choice C)

The subset consists of all the outfits that have a black shirt.

Hypotheses are always statements about the d. population parameters

Hypotheses are assertions or claims concerning population characteristics stated in statistics. An attribute or value of a population, such the population mean or percentage, is referred to as a population parameter. Based on sample data, hypothese are developed to draw conclusions or inferences about these population attributes.

The hypothesis can be expressed as comparisons of population metrics or as statements of equality or inequality. They serve as a basis for statistical studies and are used to examine certain assertions or research hypotheses. Finding pertinent solutions to the scientific inquiry is the main goal of the hypothesis. It is supported by a few evidences, and experimental methods are used to test the whole statement of the hypothesis.

Read more about Hypotheses on:

https://brainly.com/question/4232174

#SPJ4

Complete Question:

Hypotheses are always statements about which of the following?  choose the correct answer below.

a. sample statistics

b. sample size

c. estimators

d. population parameters

Answer:

B

Step-by-step explanation:

Answer:

c

Step-by-step explanation:

Step-by-step explanation:

[tex]i \: \: think \: \: it \: \: is \: \\ \\ {a}^{2} - 2ab + {b}^{2} \\ \\ that \: is \: for \: \: {(a - b)}^{2} [/tex]

I hope that is useful for you :)

Damien's regular pay per payment period is $1,062.50, his hourly rate of pay is $26.87, his overtime rate of pay is $53.74, and his gross pay for a pay period in which he worked 8 hours overtime is $1,492.42.

a) Calculation of Damien's regular pay per payment period: Given, Damien receives an annual salary of $55,300.Damien is paid weekly and his regular workweek is 39.5 hours. Therefore, the regular pay per payment period = 55,300/52 = $1,062.50So, Damien's regular pay per payment period is $1,062.50.

b) Calculation of Damien's hourly rate of pay: Let's calculate the hourly rate of pay for Damien, we will divide the regular pay per payment period by the regular workweek hours. Hourly rate of pay = 1,062.50/39.5 = $26.87Thus, Damien's hourly rate of pay is $26.87.

c) Calculation of Damien's overtime rate of pay: The overtime rate of pay will be double the hourly rate of pay. Hence, Damien's overtime rate of pay will be: Double the hourly rate of pay = 2 × 26.87 = $53.74. Therefore, Damien's overtime rate of pay is $53.74.

d) Calculation of Damien's gross pay for a pay period in which he worked 8 hours overtime at double regular pay: Damien worked 8 hours overtime, so his gross pay for the pay period will be: Regular pay = 39.5 hours × $26.87 per hour = $1,062.50. Overtime pay = 8 hours × $53.74 per hour = $429.92Gross pay = Regular pay + Overtime pay= 1,062.50 + 429.92= $1,492.42Therefore, Damien's gross pay for a pay period in which he worked 8 hours overtime at double the regular pay is $1,492.42.

You can learn more about the payment period at: https://brainly.com/question/30703528

#SPJ11

Answer:

79.7°

Step-by-step explanation:

We resolve the speed of the plane into horizontal and vertical components respectively as 300cos75° and 300sin75° respectively. Since the wind blows due west at a speed of 25 miles per hour, its direction is horizontal and is given by 25cos180° = -25 mph.  We now add both horizontal components to get the resultant horizontal component of the airplane's speed.

So 300cos75° mph + (-25 mph) = 77.646 - 25 = 52.646 mph.

The vertical component of its speed is 300sin75° since that's the only horizontal motion of the airplane. So the resultant vertical component of the airplane's speed is 300sin75° = 289.778 mph

The direction of the plane, Ф = tan⁻¹(vertical component of speed/horizontal component of speed)

Ф = tan⁻¹(289.778 mph/52.646 mph)

Ф = tan⁻¹(5.5043)

Ф = 79.7°

The code creates a scatter plot of the "gamble" variable on the "income" variable, with different plotting symbols based on sex, using the "faraway" package in R.

Here's the code to make a plot of the "gamble" variable on the "income" variable using different plotting symbols based on the sex in R:

# Load the required package and data

library(faraway)

data(teengamb)

# Create a plot of a gamble on income with different symbols for each sex

plot(income ~ gamble, data = teengamb, pch = ifelse(sex == "M", 16, 17),

    xlab = "Gamble", ylab = "Income", main = "Gamble on Income by Sex")

legend("topleft", legend = c("Female", "Male"), pch = c(17, 16), bty = "n")

This code will create a scatter plot where the "income" variable is plotted against the "gamble" variable. The plotting symbols used will be different depending on the "sex" variable.

Females will be represented by an open circle (pch = 17), and males will be represented by a closed circle (pch = 16). The legend will indicate the corresponding symbols for each sex.

Make sure to have the "faraway" package installed in R and load it using 'library'(faraway) before running this code.

Read more about scatter plots:

brainly.com/question/6592115

#SPJ4

To calculate the flux of a vector field through a surface, we can use the surface integral of the dot product between the vector field and the outward-pointing normal vector of the surface.

Let's first calculate the flux of the vector field F = 6i - 7k through a sphere of radius 5 centered at the origin, oriented outward.

The equation of the sphere centered at the origin is [tex]x^2 + y^2 + z^2 = 5^2.[/tex]

To find the outward-pointing normal vector at each point on the sphere's surface, we normalize the position vector (x, y, z) by dividing it by the magnitude of the vector.

The outward-pointing normal vector is given by N = (x, y, z) / [tex]\sqrt{(x^2 + y^2 + z^2).}[/tex]

Now, we calculate the flux using the surface integral:

Flux = ∬S F · dS,

where S is the surface of the sphere.

The dot product F · dS can be expanded as F · N dS, where dS represents the differential area vector.

The magnitude of the differential area vector on the sphere's surface is given by dS = [tex]r^2[/tex]sin(θ) dθ dφ, where r is the radius of the sphere, and θ and φ are the spherical coordinates.

Since the sphere is symmetric about the origin, the flux will be the same for all points on the surface, and we can simplify the integral as:

Flux = F · N ∬S dS.

To find the flux, we need to calculate the dot product F · N and evaluate the surface integral over the sphere's surface. Let's calculate it:

F = 6i - 7k

N = (x, y, z) /[tex]\sqrt{(x^2 + y^2 + z^2)}[/tex] = (x, y, z) / 5

F · N = (6i - 7k) · (x/5, y/5, z/5) = (6x/5) - (7z/5)

Now, let's evaluate the surface integral over the sphere's surface:

Flux = ∬S F · dS = ∬S (6x/5 - 7z/5) dS

To evaluate the integral, we can use spherical coordinates. The limits of integration will be:

θ: 0 to 2π (complete rotation around the z-axis)

φ: 0 to π (from the positive z-axis to the negative z-axis)

Flux = ∫(φ=0 to π) ∫(θ=0 to 2π) (6r sin(φ) cos(θ)/5 - 7r sin(φ) sin(θ)/5) [tex]r^2[/tex]sin(φ) dθ dφ

Simplifying and evaluating the integral will give you the flux of the vector field through the sphere.

Now, let's move on to calculating the flux of the vector field F = i - 3j + 9k through a cube of side length 5 with sides parallel to the axes, oriented outward.

Since the sides of the cube are parallel to the coordinate axes, the normal vector to each side will be aligned with the corresponding unit vector.

For example, the normal vector to the side with a normal vector i will be (1, 0, 0), and the normal vector to the side with a normal vector j will be (0, 1, 0), and so on.

To calculate the flux, we need to find the dot product between the vector field F and the outward-pointing normal vectors of each side, and then sum up the flux for all six sides of the cube.

Let's calculate the flux for each side of the cube and then sum them up to get the total flux.

Side 1: Outward normal vector = (1, 0, 0)

Dot product = (i - 3j + 9k) · (1, 0, 0) = 1

Side 2: Outward normal vector = (-1, 0, 0)

Dot product = (i - 3j + 9k) · (-1, 0, 0) = -1

Side 3: Outward normal vector = (0, 1, 0)

Dot product = (i - 3j + 9k) · (0, 1, 0) = -3

Side 4: Outward normal vector = (0, -1, 0)

Dot product = (i - 3j + 9k) · (0, -1, 0) = 3

Side 5: Outward normal vector = (0, 0, 1)

Dot product = (i - 3j + 9k) · (0, 0, 1) = 9

Side 6: Outward normal vector = (0, 0, -1)

Dot product = (i - 3j + 9k) · (0, 0, -1) = -9

Now, sum up all the dot products to get the total flux:

Flux = 1 + (-1) + (-3) + 3 + 9 + (-9) = 0

The total flux of the vector field through the cube is zero.

I hope this helps! Let me know if you have any further questions.

Learn more about vector flux  here:

https://brainly.com/question/29739579

#SPJ11

Answer:

1) y = -7/10x + 21

Step-by-step explanation:

1)

Points (5, 7) and (15, 0)

Slope:

m=(y2-y1)/(x2-x1)

m=(0-7)/(15-5)

m=(-7)/10

m= -7/10

Slope-intercept:

y - y1 = m(x - x1)

y - 7 = -7/10(x - 5)

y - 7 = -7/10x + 14

y = -7/10x + 21

the answer is 12.57

Step-by-step explanation:

The formula to find circumference is 2×pi×r. Two is the radius. So when you plug it into the formula you get 12.57.

Answer:

its B

Step-by-step explanation: Cause I have big brain. >:)

[tex] \purple{ \tt{ \huge{ \: ✨Answer ✨ \: }}}[/tex]

[tex] \: \: \: \: \: \: \: \: \: \: \: \: \red{ \boxed{ \boxed{ \tt{ \huge{{ \: 32 \: }}}}}}[/tex]

The solution to the system of equations is[tex]X(t) = c_1 * e^{6t} * [37 \ \ -3] + c_2 * e^{-3t} * [-37\ \ 12][/tex]. The solution curves exhibit a combination of exponential growth and decay, and as t approaches infinity, they converge towards the eigenvector associated with the negative eigenvalue.

To find the general solution to the linear system of differential equations:

[tex]X' = \left[\begin{array}{ccc}9&37\\-1&-3\end{array}\right] X[/tex]

We need to find the eigenvalues and eigenvectors of the coefficient matrix [[9   37] [-1   -3]].

Let A be the coefficient matrix.

The characteristic equation is given by:

det(A - λI) = 0, where λ is the eigenvalue and I is the identity matrix.

The coefficient matrix A - λI is:

[tex]X' = \left[\begin{array}{ccc}9-\lambda&37\\-1&-3-\lambda\end{array}\right] X[/tex]

Setting the determinant equal to zero:

[tex]det (\left[\begin{array}{ccc}9-\lambda&37\\-1&-3-\lambda\end{array}\right] )[/tex]

Expanding the determinant, we get:

[tex](9-\lambda)(-3-\lambda) - (-1)(37) = 0[/tex]

Simplifying the equation, we have:

[tex](\lambda-6)(\lambda+3) = 0[/tex]

Solving for λ, we find two eigenvalues:

[tex]\lambda_1 = 6\\\lambda_2 = -3[/tex]

Next, we find the eigenvectors corresponding to each eigenvalue.

For [tex]\lambda_1 = 6[/tex]:

[tex](A - \lambda_1I)v_1 = 0[/tex]

Substituting the values, we have:

[tex]\left[\begin{array}{ccc}3&37\\-1&-9\end{array}\right] v_1 = 0[/tex]

Solving the system of equations, we find v1 = [37 -3].

For [tex]\lambda_2 = -3[/tex]:

[tex](A - \lambda_2I)v_2 = 0[/tex]

Substituting the values, we have:

[tex]\left[\begin{array}{ccc}12&37\\-1&0\end{array}\right] v_2 = 0[/tex]

Solving the system of equations, we find [tex]v_2[/tex] = [-37 12].

Therefore, the general solution to the linear system of differential equations is:

[tex]X(t) = c_1 * e^{6t} * [37 \ \ -3] + c_2 * e^{-3t} * [-37\ \ 12][/tex]

where [tex]c_1\ and\ c_2[/tex] are constants.

b) The solution curves to this linear system represent trajectories in the state space. The behavior of the solution curves depends on the eigenvalues.

Since we have [tex]\lambda_1 = 6[/tex] and [tex]\lambda_2 = -3[/tex], the system has one positive eigenvalue and one negative eigenvalue. This indicates that the solution curves will exhibit a combination of exponential growth and decay.

As t approaches infinity, the exponential term with [tex]e^{-3t}[/tex] will dominate, and the solution curves will converge towards the eigenvector associated with the negative eigenvalue, [-37   12].

On the other hand, as t approaches negative infinity, the exponential term with [tex]e^{6t}[/tex] will dominate, and the solution curves will diverge away from the origin in the direction of the eigenvector associated with the positive eigenvalue, [37   -3].

In summary, the solution curves will either converge or diverge depending on the initial conditions, and as t approaches infinity, they will converge towards the eigenvector associated with the negative eigenvalue.

Complete Question:

a) Find the metal solution to the linear system of differential equations

[tex]X' = \left[\begin{array}{ccc}9&37\\-1&-3\end{array}\right] X[/tex]

b) Give a physical description of what the solution curves to this linear system look like. What happens to the solution curves as to 12?

To know more about system of equations, refer here:

brainly.com/question/21620502

#SPJ4

Answer:

d

Step-by-step explanation:

Note that

> means greater than

< means less than

for example : 2 < 3 means 2 is less than 3

3 >2 means 3 is greater than 2

To determine which comparison is better we have to convert litre to millimetre

1 litre = 1000mm

A 5 mm > (50 x 1000)

5 mm > 50,000

5 is not greater than 50,000

B. (2 x 1000) < 200 mm

2000 < 200

2000 is not less than 200

C. (100 x 1000) < 1,000

100,000 < 1000

100,000 is not less than 1000

D. 3200 > (3 X 1000)

3200 > 3000

3200 is greater than 3000

14: a

1

=

39

/2                              0.25               313%        16%

15:     54

By filling in the elements accordingly and comparing the Venn diagram with the calculated results, the accuracy of the union and intersection can be confirmed i.e. AUB = {1, 2, 3, 4, 5, 6, 7, 8, 9} and An B = {4, 8}.

To find the union (AUB) and intersection (An B) of the sets A = {1, 4, 6, 8, 9} and B = {2, 3, 4, 5, 7, 8}, we compare the elements in the sets. The union (AUB) is the combination of all unique elements from both sets, while the intersection (An B) consists of the elements common to both sets.

(a) The union (AUB) is {1, 2, 3, 4, 5, 6, 7, 8, 9}, which includes all the distinct elements present in both sets.

(b) The intersection (An B) is {4, 8}, representing the elements that are common to both sets A and B.

To verify these results, you can draw a Venn diagram. Draw two overlapping circles representing sets A and B, and fill in the elements accordingly. The overlapping region represents the intersection, and the combination of all elements in both circles represents the union. Comparing the Venn diagram with the calculated results confirms the accuracy of the union and intersection.

To learn more about “union” refer to the https://brainly.com/question/2166579

#SPJ11

Answer:  17; 13; 9; 5; 1

Step-by-step explanation:

y = -2x + 9

When x = -4, y = 17

When x = -2 , y = -2x + 9 = -2(-2) + 9 = 13

When x = 0 , y = -2x + 9 = -2(0) + 9 = 9

When x = 2 , y = -2x + 9 = -2(2) + 9 = 5

When x = 4 , y = -2x + 9 = -2(4) + 9 = 1