Can you help me with this?

The resistance at opposite ends is 8.4  × 10–6 Ω cm​. The resistance at opposite sides is 0.021 × 10–6 Ω cm​.

The obstruction to current flow in an electrical circuit is measured by resistance. The Greek letter omega represents the unit of measurement for resistance, known as ohms.

Georg Simon Ohm (1784–1854), a German physicist who investigated the connection between voltage, current, and resistance, is the name given to the unit of resistance. Ohm's Law is attributed to him as its creator.

In the given question, The length of the strip = 20 cm,  The breadth of the strip = 01. and The thickness of the strip= 0.4 The resistivity of the copper= 1.7 × 10–6 Ω cm​.

Therefore, The resistance at opposite ends is 8.4  × 10–6 Ω cm​. The resistance at opposite sides is 0.021 × 10–6 Ω cm​.

To learn more about resistance, refer to the link:

https://brainly.com/question/11431009

#SPJ1

When a mass m particle is released onto a smooth inclined plane (where the frictional force F=0), it will glide down the slope.

We resolve in the direction of motion in order to get the particle's sliding acceleration.

F=ma, 

mg cos(90∘−θ)=ma, 

g cos(90∘−θ)=a, 

g sin(θ)=a.

How many Newtons is the net force while the block is travelling at a constant speed?

Zero. Newton's first law of motion states that any object travelling at a constant speed experiences no net external forces, hence the total amount of forces acting on the object must be zero. The mathematical expression for an item being under no net external force is Fnet=0 or F=0.

To know more about Newton's laws, visit:

https://brainly.com/question/9405021

#SPJ1

The 8 types of waves found on the electromagnetic spectrum, from longest to shortest wavelength, are: Radio waves , Microwaves , Infrared radiation, Visible light, Ultraviolet radiation, X-rays, Gamma rays.

The electromagnetic spectrum is a range of electromagnetic waves that includes radio waves, microwaves, infrared radiation, visible light, ultraviolet radiation, X-rays, and gamma rays.

The wavelength of an electromagnetic wave is the distance between consecutive points of equal phase in the wave. The shorter the wavelength, the higher the frequency of the wave.

Radio waves have the longest wavelength and the lowest frequency of the electromagnetic waves. Gamma rays have the shortest wavelength and the highest frequency.

To know more about microwaves

https://brainly.com/question/15708046

#SPJ4

Answer:

Δy = viy t + (1/2)gt^2

Explanation:

[tex]y = y_{i}+v_{iy}_t + (1/2)a_{y}t^{2}[/tex]

Δy = viy t + (1/2)gt^2

The basic kinematic equations for horizontal and vertical motion are as follows:

s = v₀t + ¹/₂at²

Horizontal motion is:

x = v₀ₓt + ¹/₂aₓt²

x = v₀ₓt

x = v₀ cosαt

Because there is no air resistance: x = v₀ cosθt

Vertical motion is:

y = v₀[tex]__y[/tex]t + ¹/₂a[tex]__y[/tex]t²

y = v₀ sinαt - ¹/₂gt²

Solve both for the velocity trigonometric function term as follows:

y = v₀ sinαt - ¹/₂gt²

v₀sinαt = ¹/₂gt² + y

v₀sinα = ¹/₂gt² + y/t

and

x = v₀ cosαt

v₀cosα = x/t

Now divide these two equations and we get

v₀sinα/v₀cosα = tanα [tex]=\frac{1/2gt + \frac{y}{t} }{\frac{x}{t} }[/tex]

tan α [tex]= \frac{1/2gt + \frac{y}{t} }{\frac{x}{t} } = \frac{gt^2}{2x} + \frac{y}{x}[/tex]

tan α [tex]= \frac{gt^2}{2x} + \frac{y}{x}[/tex]

Enter a value, x is the distance between the boarding 35.5 m, and y is the difference between the launch height and the drop point. The launch height is 15.5 m and the landing height is 11.0 m, so y = -4.5 m. Finally, we are told the projectile travel time is 2.2 s.

tan α [tex]= \frac{gt^2}{2x} + \frac{y}{x}[/tex]

tan α [tex]= \frac{(9.8)(2.2)^2}{2(35.5)} + \frac{-4.5}{35.5}[/tex]

tan α [tex]= 0.668 - 0.126[/tex]

tan α [tex]= 0.542[/tex]

     α = tan⁻¹ 0.542

     α = 28.4°

For the second launch, y₂ is +7.0 m launch altitude is still 15.5 m, but the deployment altitude is now 22.5 m, and x is still 35.5 m. The angle remains 28.4°. This time we don't know the flight time or initial velocity we are asked to find. Using horizontal distances, we can solve for time.

x = v₀.cosα.t

t² = x/v₀.cosα

Now do it for y₂:

          y₂ [tex]= v_0sin(\alpha) t - 1/2gt^2[/tex]

          y₂ [tex]= v_0sin(\alpha) (\frac{x}{v_0cos(\alpha)} ) - 1/2g (\frac{x}{v_0cos(\alpha)} )^2[/tex]

           y₂ [tex]= x tan (\alpha ) - \frac{gx^2}{2v_0cos(\alpha)^2}[/tex]

 [tex]\frac{gx^2}{2v_0cos(\alpha)^2} = x tan (\alpha ) - y_2[/tex]

We need to solve v₀:

   [tex]\frac{gx^2}{2v_0cos(\alpha)^2} =\frac{1}{ x tan (\alpha ) - y_2}[/tex]

2v₀cos (α)² [tex]= \frac{gx}{ x tan (\alpha ) - y_2}[/tex]

             v₀² [tex]= (\frac{1}{2cos(\alpha)^2} ) \frac{gx}{ x tan (\alpha ) - y_2}[/tex]

            v₀² [tex]= (\frac{x^2}{cos(\alpha)^2} ) \frac{g/2}{ x tan (\alpha ) - y_2}[/tex]

            v₀² [tex]= (\frac{x}{cos(\alpha)^2} ) \sqrt{ \frac{g/2}{ x tan (\alpha ) - y_2}}[/tex]

Now we can enter values:

v₀² [tex]= (\frac{x}{cos(\alpha)^2} ) \sqrt{ \frac{g/2}{ x tan (\alpha ) - y_2}}[/tex]

v₀² [tex]= (\frac{35.5}{cos(28.4^0)} ) \sqrt{ \frac{9.8/2}{ 35.5 tan (28.4^0) - 7.0}}[/tex]

v₀² = 40.386 [tex]\sqrt{\frac{4.9}{12.17} }[/tex]

v₀² = 40.386 (0.634)

v₀² = 25.62 m/s

Learn more about calculating speed at altitude at https://brainly.com/question/8539845

#SPJ4

Xiao speculates that the unheard portion refers to a verb, whereas Jess speculates that it relates to a noun.

Anything related to sound in terms of receiving, transmitting, reproducing, or its particular frequency is referred to as audio. A stereo is an illustration of an audio object. YourDictionary.

Audio Physical loudspeakers enjoy a solid reputation among music enthusiasts and are renowned for both their performance and high-quality design. Throughout the more than 30 years of the marque, this history of quality has persisted despite some more difficult times.

To know more about Audio visit:

https://brainly.com/question/21346539

#SPJ4

Statements that is true regarding the image formed by the lens is real, inverted and smaller than the object.

Lens that converges rays of light that are traveling parallel to its principal axis is called converging lens. Converging lens is identified by their shape. They are thick across the middle and thin at the upper and lower edges.

Given; focal length= 15cm , p = 15cm

1/p + 1/q = 1/f

​ 1/50+ 1/q= 1/15

q =21.4cm

Magnification, M=−q/p

=−0.429

Positive image distance implies that image is real and negative magnification confirms that image is inverted. M = -0.429 implies that image is smaller than object.

To know more about converging lens, refer

https://brainly.com/question/24305458

#SPJ4

Answer:

using the formula

Resistance=Resistivity × length/area

Area=1 ,Resistance(R)=0.2ohm ,resistivity(P)=? ,length=7.5×10^-9

R=Pl/A

Pl=RA

P=RA/l

P=0.2×1/7.5×10^-9

P=0.027×10^9

P=2.7×10^7ohmsmeter

The resistivity of the membrane is 2.7×10⁷ ohm-meter.

Electrical resistance of a conductor with a unit cross-sectional area and unit length is called resistivity. Resistivity is a distinctive attribute of any material that may be used to compare different materials based on how well they conduct electric currents. Low conductivity is indicated by high resistance.

Mathematically the relation between resistance and resistivity can be written as:

Resistance=Resistivity × length/area

Given parameters:

Area of the membrane: A=1 m²

Resistance(R)=0.2ohm ,

resistivity(ρ)=?

length=7.5×10^-9 m.

Now:

  R=ρl/A

⇒ρl=RA

⇒ρ=RA/l

⇒ρ=0.2×1/7.5×10⁻⁹

⇒ρ=0.027×10⁹

⇒ρ=2.7×10⁷ ohm-meter.

Hence, the resistivity of the membrane is 2.7×10⁷ ohm-meter.

Learn more about resistance here:

https://brainly.com/question/14547003

#SPJ2

A polygon whose internal angles are all less than 180 degrees is referred to as a convex n-gon. The same can be computed as:

The formula (n-2) × 180 degrees, where n is the number of sides in the polygon, gives the sum of the measures of the interior angles of a convex n-gon.

The total of the measures of the remaining (n-x) angles must equal (n-2) × 180 - 131x degrees if x is the number of internal angles of the n-gon that measure 131 degrees. Since the internal angles of a convex n-gon must have measures that are less than 180 degrees,

this implies that

(n-2)180 - 131x < (n-x)180

Solving this inequality for x,

we find that

[tex]x < \frac{(n-2)}{3}[/tex]

Therefore, the maximum number of interior angles of a convex n-gon that can measure 131 degrees is (n-2)/3.

To learn more about angles: https://brainly.com/question/2046046

#SPJ4

The motion of the rigid system will be (a) linear (b) rotational (c) both linear and rotational

The first condition for equilibrium states that the body must have a net force of zero. This means that when the net force acting on a body is not zero the body will continue to move in a straight path and the motion of the rigid body will be linear.

The second condition for equilibrium states that the body must have zero net torque acting on the body for achieving equilibrium. torque is the rotational equivalent of force. Therefore, when the net torque is not zero, the rigid body keeps rotating which leads to a rotational motion.

When both the conditions of equilibrium are not satisfied the rigid body does not achieve the static equilibrium.

Learn more about static equilibrium:

brainly.com/question/12582625

#SPJ4

When David senses Rebecca's position at di while she is in front of him at a distance of do, di will be +84 cm.

The focal length of an optical system, which is the inverse of optical power, determines how strongly light converges or diverges. Positive focus length systems are considered to converge light, whilst negative focal length systems are said to diverge light.

the focus distance is +40 cm

m = -0.45 is the magnification.

positive focal length and a negative magnification.

The lens in question is convex.

for a lens

m = di/do and 1/f = (1/di) - (1/do)di

= -0.4do1/f = (1/-0.4do) - 1/do do

= -210 cmdi = -0.45 * -210

di = +84 cm

To learn more about focal length visit:-

https://brainly.com/question/29870264

#SPJ4

The passage is describing the beauty of Acadie, a place that is home to the speaker. This passage is from Bliss Carman's "LOW TIDES" .

The sun is setting, and the speaker is captivated by the beauty of the landscape, which is enhanced by the unelusive glories of the tide. The speaker also reflects on a beloved face being gone for a long time and is moved by a grievous stream, which meanders through the fields of Acadie as if it is trying to figure out why the beloved face is gone. The speaker almost dreams that the beauty of the place will remain until the beloved face returns. The passage conveys a sense of longing and hope for the beloved to come back to Acadie.

Learn more about Passage Reading here:

https://brainly.com/question/24716030

#SPJ4

Vector B of the following vectors best represents the direction of the resultant electric field at point p, the center of the triangle.

A  quantity or phenomenon that has two independent properties i.e magnitude and direction is named as vector.

E = E1+ E2.

According to the bottom panel of the picture, a point charge's electric field has the formula E = kr2qr.

E =k ea2q uphill and to the right at 60, and E2 =kea2q upward and to the left at 60.

Therefore, E= E1 + E2 = kea2q[(cos60i+sin60j) + (cos60i+sin60j)] = kea2q[2(sin60j)

= 1.73kea2qj. i.e vector B

To know more about electric field visit:-

brainly.com/question/12324569

#SPJ4

The magnitude of the provided average friction force F (in n) which is acting on the toboggan during it was moving is  8.66 N

Toboggan is a long flat-bottomed light sled composed usually of thin boards curved up at one end with usually low handrails at the sides. : a downward course as well as a sharp decline.

Given:

vi = 4.1 m/s

vf = 0

Δv = v final - v initial

= 0 - 4.1 = -4.1 m/s

Δ momentum i.e  mΔv = (19 kg).(-4.1 m/s)

= 77.9 kgm/s

The average friction force (Ff) takes 9 seconds to take the toboggan to a end point, hence,  impulse = Ft

= Ff(9)

Impulse is = Δ momentum, so

Ff(9) = 77.9;

Ff = 8.66 N

To know more about toboggan visit

brainly.com/question/17087889

#SPJ4

Answer:

1. Inertia is the property of an object that resists changes in its state of motion. An object with more mass has more inertia, meaning it is harder to change its motion. For example, a heavy truck has more inertia than a small car, so it takes more force to get the truck moving or to change its direction of motion.

2. Balanced forces are forces that act on an object in opposite directions and are equal in magnitude, resulting in no net force on the object. This means that the object will not accelerate or change its state of motion. Action-reaction forces, also known as Newton's Third Law forces, are forces that act on two objects in response to each other. These forces are always equal in magnitude and opposite in direction, but they do not cancel each other out because they act on different objects. An example of action-reaction forces is the force of a person pushing against the ground and the force of the ground pushing back against the person. While these forces are equal and opposite, they do not cancel out because they act on different objects.

Answer:

The magnetic force on a moving charged particle is given by the Lorentz force law, which states that the force is equal to the product of the particle's charge, its velocity, and the magnetic field. Since the magnetic field points in the positive y direction and the velocity of the electrons is in the positive x direction, the magnetic force on the electrons will point in the negative z direction (assuming we are using the right-hand rule to determine the direction of the force). The magnitude of the force can be found using the formula above: F = q * v * B, where q is the charge on the electrons, v is their velocity, and B is the strength of the magnetic field. The charge on an electron is -1.6 x 10^-19 C, so the magnitude of the force on the electrons will be: F = (-1.6 x 10^-19 C) * (4.6 x 105 m/s) * (2.8 T) = -2.19 x 10^-13 N.

Answer:

Explanation:

The object's height is the vertical position along its trajectory.

Answer:

The force of attraction and repulsion between two current-carrying parallel conductors can be demonstrated using a simple experiment. To do this, you will need two long, straight conductors, a power source, and a means of measuring the force between the conductors.

First, connect the two conductors to the power source so that they are carrying current in the same direction. Place the conductors parallel to each other, and measure the force between them using a spring scale or other device. You should observe a force of attraction between the conductors.

Next, reverse the direction of the current in one of the conductors, and measure the force between the conductors again. This time, you should observe a force of repulsion between the conductors.

This experiment demonstrates that current-carrying conductors exert a force of attraction on each other when the currents are in the same direction, and a force of repulsion when the currents are in opposite directions. This phenomenon is known as the Lorentz force.

The magnitude of the impulse delivered to the ball by the player is -9.536 kg-m/s

Given that,

Mass of a soccer ball, m = 0.298 kg

Initial speed, u = 15 m/s

Final speed, v = -17 m/s (negative as it is in opposite direction)

(a) Impulse = change in momentum

J = 0.298 × (-17 -15)

J = -9.536 kg-m/s

Therefore the magnitude of the impulse delivered to the ball by the player is -9.536 kg-m/s.

The object's change in momentum is equal to the impulse it experiences. The formula for magnitude of impulse is F • t = m • v. When two objects collide, an impulse occurs, which both causes and equals the change in momentum.

To know more about magnitude of impulse, visit:

brainly.com/question/14848283

#SPJ1

mu + MU = (m + M) V... eq (1)

given:

m=0.05 kg, M=3.5 kg, U= 0 and V=1.82 m/s.

put these numbers to equation (1)

0.05×u +0 =(0.05+3.5)×1.82

u=3.55×1.82 /0.05

u= 6.461/0.05

u=129.22m/s ...(2)

prior to a collision

Bullet: |p|bullet =mu =0.05129.22=6.461 kg/s

|p | block = MU=3.5×0 =0 kg.m/s

After  collision

Combining, |p| equals (m+M)V = (0.05+3.5) 1.82 =6.461 kg.m/s.

Equation (2) shows the initial speed of the projectile.

=129.22 m/s.

what is collision?

Collision is defined as the meeting of two or more things with such force that both or all of them suffer harm or have their development significantly slowed.

To know more about collision click the link given below

brainly.com/question/2624221

#SPJ1

Answer:

(b) active solar because the solar radiation passing thru the window will help to heat his room

The equation that could be used to determine the acceleration a of the box  is (-f-mg sin 0 = ma)

If the direction of motion of the mass is up the plane, then the frictional force F will act down the plane.

Normal force N is exerted on the body by the plane due to the force of gravity i.e. mg cos θ. These two will be equal hence cancelled out.

Here, according to the question,

Box is moving up so, Force of friction is acting downwards and mg sin 0 is also acting downwards. Both are acting against the motion of the box so both terms will be negative i.e. (-f) and (-mg sin 0)

We know resultant force is equal to (ma)

So, (-f) + (-mg sin0) = ma

-f - mg sin0 = ma

The equation that could be used to determine the acceleration a of the box  is (-f-mg sin 0 = ma)

To know more about frictional force on inclined plane, check out:

https://brainly.com/question/28790668

#SPJ4

One piece of evidence from the New Horizons mission that suggests recent or ongoing geological activity on Pluto is the presence of mountains with smooth, sediment-like material on their surfaces.

This material is thought to be composed of water ice that has been altered by geologic processes, such as the flow of glaciers or the collapse of underground caverns.

Other evidence of recent or ongoing geological activity on Pluto includes the presence of ridges, valleys, and other landforms that suggest the existence of tectonic activity, as well as the existence of ice on the surface that has a relatively high surface temperature, indicating that they may have recently been exposed to heat.

Learn more about Pluto at

https://brainly.com/question/13402868?referrer=searchResults

#SPJ4

Atomic absorption spectroscopy, often known as AAS or AA spectroscopy, is one of the earliest methods for elemental analysis to be established for the market.

The analytical method known as flame atomic absorption spectroscopy (Flame AAS or FAAS) was first commercially released in the 1960s after being invented in 1952.

The method has been well-liked ever since for its dependability and simplicity. AAS is an analytical method for figuring out how much of a particular element is in a sample. It is based on the idea that atoms (and ions) may absorb light with a certain, distinct wavelength.

The atom absorbs the energy (light) when it is present at this particular wavelength. By absorbing energy (light) at a certain wavelength, an electron is stimulated from the ground state to a higher energy level.

Therefore, Atomic absorption spectroscopy, often known as AAS or AA spectroscopy, is one of the earliest methods for elemental analysis to be established for the market.

To learn more about atomic spectrometers, refer to the link:

https://brainly.com/question/4172177

#SPJ1

Only the Sun and the Moon are brighter than the planet Venus, which represents the goddess' own beauty and makes for a lovely spectacle in the sky.

The ancient Greeks gave the name Athena—after their goddess of wisdom—to the fourth planet from the Sun.

The same planet was given the name Minerva by the Romans, who did so in honor of Athena in Greek mythology. The first manned spacecraft to visit the planet was given the name Athena by the Americans.

Therefore, In honor of their goddess of love and beauty, the Romans gave the brightest planet, Venus, that name. After the telescope was created in the early 1600s, the planets Uranus and Neptune were also found.

Learn more about planet here:

https://brainly.com/question/11953855

#SPJ1

The time interval during which the speed of the wheel is increasing is 4 s.

The temporal rate at which angular velocity changes is known as angular acceleration. The standard unit of measurement is radians per square second.

The angular velocity at time t = 0, is ω₁ = - 6.00 rad/s.

The angular velocity at time t = 10.0 s, is ω₂ = +4.00 rad/s.

Angular acceleration of the wheel = change in angular velocity /time interval

= ( 4.00 - (-6.00))/10 rad/s²

= 1.0 rad/s²

Hence, angular velocity becomes zero at time = ( 0 - ( -6))/1.0 s = 6 s.

So, during t = 0 to t = 6s, the clockwise angular  velocity of the wheel decreases from 6.00 rad/s to 0.00 rad/s and  during t = 6s to t = 10s , the counterclockwise angular  velocity of the wheel increases from 0.00 rad/s to +4.00 rad/s.

Hence,  the time interval during which the speed of the wheel is increasing is = 10 s - 6 s = 4 s.

Learn more about angular acceleration here:

https://brainly.com/question/29428475

#SPJ1

Answer:

The vertical and horizontal distance of a projectile will be equal if the angle of projection is 45 degrees.

Explanation:

This is because at an angle of 45 degrees, the projectile will be equally influenced by the horizontal and vertical components of its motion. As a result, the projectile will travel the same distance horizontally as it does vertically.

For other angles of projection, the projectile will be more influenced by either the horizontal or the vertical component of its motion, depending on the angle.

At an angle of 90 degrees (straight up), the projectile will be primarily influenced by the vertical component of its motion, while at an angle of 0 degrees (horizontal), the projectile will be primarily influenced by the horizontal component of its motion.

When the mass is at its maximum displacement from equilibrium, the instantaneous velocity 'is zero'.

What is velocity?

A measure of a moving object's speed and direction is called velocity. It can be expressed as a vector quantity with direction and magnitude (speed).

According to the given question:

An object has exhausted all of its potential energy to move when it reaches its maximum displacement from equilibrium. Consequently, the object has zero instantaneous velocity because it lacks momentum to continue moving.

Hence, Option A is correct.

To know more about SHM visit

https://brainly.com/question/14549078

#SPJ4

The temperature increase of each car will be 0.42 degree celcius

Describe kinetic energy.

The energy of motion, or kinetic energy, can be seen in the movement of an item or subatomic particle. Kinetic energy is present in every moving object and particle.

Thermal energy is the term used to describe the energy present in a system that determines its temperature. The movement of thermal energy is heat.

Energy cannot be created or destroyed; it can only be changed from one form of energy to another, according to the law of conservation of energy. This implies that a system always possesses the same amount of energy, barring external energy addition.

v is 50km/h i.e. 13.889m/s

K=1/2mv2

Q=mcΔT

c = 450

1/2mv2=mcΔT

∴ ΔT=v2/2c

ΔT= 13.88*13.88/ 450

ΔT= 0.42 degree celcius

To learn more about law of conservation of energy us elink below:

https://brainly.com/question/166559

#SPJ4

$9,889.82 much profit did Cynthia make in total.

In the financial markets, it can be difficult to tell stocks from shares. Both terms are typically interchangeable in American English when referring to financial equities, more precisely, securities that signify ownership in a public corporation.

The more inclusive, generic term is "stocks." It is frequently used to refer to a portion of ownership in one or more businesses.

In comparison, "shares" has a more precise connotation in everyday speech: It frequently refers to the ownership of a specific business.

Therefore, $9,889.82 much profit did Cynthia make in total.

To learn more about Stock, refer to the link:

https://brainly.com/question/29992015

#SPJ1