create a query which shows order number, amount and date for every order from orders table. save the query as qry4_1.

The four arithmetic addition operations in both decimal and RC representation have been carried out.

Arithmetic addition operations in both decimal and RC representation decimal representation: In this representation method, we use the base 10 numbering system to represent numbers. This is the most widely used and well-known representation method. Therefore, the sum of decimal numbers a and b is c, as shown below: a + b = c.

For example, let's add 123 and -125:123-125-2RC representation: In this method, the numbers are represented using the base 2 system. As a result, all of the numbers are expressed as a string of bits. To obtain the RC representation of any decimal number, follow these steps: Step 1: Convert the decimal number to binary format.

Step 2: Invert the binary number's bits.

Step 3: Add one to the result obtained in Step 2.

The arithmetic addition operation in RC representation for the four problems is explained below a. 123 +(-125)

Decimal representation:123+(-125)=-2RC representation: 01111011 + 10000011 = 11111100 + 1 = 11111101b. (-105) + 127

Decimal representation:-105+127=22RC representation: 10010001 + 11111111 = 100011000 + 1 = 10011001c. (-101) + 98

Decimal representation:-101+98=-3RC representation: 10011011 + 10011110 = 100110001 + 1 = 10011010d. 119+ (-17)

Decimal representation:119+(-17)=102RC representation: 01110111 + 11101111 = 100000110 + 1 = 100000111

Therefore, the four arithmetic addition operations in both decimal and RC representation have been carried out.

know more about binary number

https://brainly.com/question/28222245

#SPJ11

The given function is `u(x, y) = -8x'y + 8xy³`. Now, we need to prove that the given function is harmonic.

A function `f(x, y)` is said to be harmonic if it satisfies the Laplace equation, which is given by:  

∇²f = 0

∇² is the Laplacian operator and is defined as: ∇²f = (d²f)/(dx²) + (d²f)/(dy²).

Let's find the Laplacian of the given function `u(x, y)` :

∇²u = ∂²u/∂x² + ∂²u/∂y²= ∂/∂x (-8y + 24xy²) + ∂/∂y (-8x')= -8y + 24xy² - 8x'  (using first-order partial derivatives)

But, we are given that x' = y³.

So, substituting this value, we get:

∇²u = -8y + 24xy² - 8y³

On simplification, we get:

∇²u = 24xy² - 8y³ - 8y

This is not equal to zero. Hence, `u(x, y) = -8x'y + 8xy³` is not a harmonic function.

If the Laplacian had been equal to zero, then we could have said that the given function is harmonic.

Therefore, it is proved that the given function is not harmonic.

To know more about Laplace Equation at:

https://brainly.com/question/28497401

#SPJ11

The product gotten from the reaction of Butan-2-one with sodium borohydride followed by work up is Butan-2-ol (2-Butanol).

The product of Butan-2-one with methyl triphenylphosphonium bromide and a base is a substituted ketone, depending on the chosen base.

The result of reacting Butan-2-one with two methanol equivalents and an acid catalyst is a mixture of methyl ethers (dependent on conditions). The reaction of Butan-2-one with zinc amalgam and hydrochloric acid produces 2-Butanol.

Learn more about   Butan-2-one from

https://brainly.com/question/31504719

#SPJ4

The phase of the Security Services Life Cycle (SSLC) that involves determining the need is the "Requirements Analysis phase".

During the Requirements Analysis phase, the focus is on understanding and defining the security needs of an organization or system. This involves gathering information about the assets, potential threats, vulnerabilities, and desired security goals. The goal is to identify the specific security requirements and constraints that must be addressed to protect the organization's information and resources effectively.

In this phase, various techniques such as interviews, surveys, risk assessments, and business impact analysis may be employed to gather relevant information. The outcome of the Requirements Analysis phase is a clear understanding of the security needs and the creation of a set of requirements that will guide the subsequent phases of the SSLC.

By conducting a thorough analysis of security requirements in the initial phase, organizations can lay a solid foundation for designing and implementing effective security solutions that align with their specific needs and goals.

Learn more about Requirements Analysis phase here:

https://brainly.com/question/13567536

#SPJ11

To determine the height of a half-wave transmitting antenna like the KVCU antenna, we need to calculate the wavelength and then divide it by two.

The formula to calculate the wavelength is:

Wavelength = Speed of Light / Frequency

Assuming we know the frequency at which the antenna operates, we can substitute the values into the formula to find the wavelength.

For example, if the frequency is 100 MHz (100,000,000 Hz), and the speed of light is approximately 3 x 10^8 meters per second, the calculation would be:

Wavelength = (3 x 10^8) / (100 x 10^6) = 3 meters

Once we have the wavelength, we divide it by two to determine the height of the half-wave antenna:

Height = Wavelength / 2 = 3 meters / 2 = 1.5 meters

Therefore, for a half-wave transmitting antenna like the KVCU antenna, it should have a height of approximately 1.5 meters when oriented vertically with respect to the ground.

Learn more about antenna here

https://brainly.com/question/31545407

#SPJ11

Answer:

CAD and a database

Explanation:

The correct answer is CAD and a database. When American Motors Corportation introduced the Jeep Cherokee, it implemented CAD to increase engineering productivity and combined that with a new communications system.

The volume of the region bounded above by the paraboloid z = 9 - x^2 - y^2, below by the xy-plane, and lying outside the cylinder x^2 + y^2 = 1,the volume of the described region is infinite (due to the unbounded nature of the region) minus (25/6)π.

To find the volume of the region bounded above by the paraboloid z = 9 - x^2 - y^2, below by the xy-plane, and lying outside the cylinder x^2 + y^2 = 1, we need to set up a triple integral over the appropriate region in the xy-plane.

The region in the xy-plane that lies outside the cylinder x^2 + y^2 = 1 can be represented in polar coordinates as 1 ≤ r ≤ ∞ and 0 ≤ θ ≤ 2π. Therefore, we will integrate with respect to r and θ.

The height (z) of the paraboloid ranges from the xy-plane (z = 0) to the paraboloid surface (z = 9 - x^2 - y^2). So, the integral for the volume can be set up as follows:

V = ∫∫∫ (9 - x^2 - y^2) r dz dr dθ

To evaluate this triple integral, we need to express x and y in terms of polar coordinates. In this case, x = rcos(θ) and y = rsin(θ).

Substituting these values into the integral, we have:

V = ∫∫∫ (9 - r^2cos^2(θ) - r^2sin^2(θ)) r dz dr dθ

Simplifying further:

V = ∫∫∫ (9r - r^3(cos^2(θ) + sin^2(θ))) dz dr dθ

The volume integral is separable, so we can evaluate it in the order: dz, dr, dθ.

∫ (9r - r^3(cos^2(θ) + sin^2(θ))) dz = 9r^3 - r^5

∫ 9r^3 - r^5 dr = (9/4)r^4 - (1/6)r^6

∫ (9/4)r^4 - (1/6)r^6 dθ = (9/4)r^4θ - (1/6)r^6θ

Integrating θ from 0 to 2π, we obtain (2π - 0) = 2π.

Therefore, the volume V can be calculated as:

V = ∫∫∫ (9r - r^3(cos^2(θ) + sin^2(θ))) dz dr dθ

= ∫[(9/4)r^4θ - (1/6)r^6θ]dθ (from 0 to 2π)

= 2π[(9/4)r^4θ - (1/6)r^6θ]

Since r ranges from 1 to ∞, we substitute this range into the expression:

V = 2π[(9/4)(∞)^4θ - (1/6)(∞)^6θ] - 2π[(9/4)(1)^4θ - (1/6)(1)^6θ]

= 2π[∞ - 0] - 2π[9/4 - 1/6]

= ∞ - 2π[27/12 - 2/12]

= ∞ - 2π(25/12)

= ∞ - (25/6)π

Therefore, the volume of the described region is infinite (due to the unbounded nature of the region) minus (25/6)π.

To learn more about polar coordinates visit: https://brainly.com/question/14965899

#SPJ11

For the given stress values, the principal normal stresses Op1 and Op2 are -86 MPa and -51 MPa, respectively. The magnitude of the maximum in-plane shear stress is 45 MPa, and the magnitude of the absolute maximum shear stress is 35 MPa.

1. Determining Op1 and Op2:

Based on the figure, we can determine the principal normal stresses. The vertical plane has a stress of -86 MPa, which corresponds to Op1. The horizontal plane has a stress of -51 MPa, which corresponds to Op2.

2. Determining the magnitude of maximum in-plane shear stress:

The magnitude of the maximum in-plane shear stress can be determined by taking the given value of y, which is 45 MPa.

3. Determining the magnitude of the absolute maximum shear stress:

To find the magnitude of the absolute maximum shear stress, we calculate half the difference between Op1 and Op2. In this case,

(Op1 - Op2)/2 = (-86 MPa - (-51 MPa))/2 = -35 MPa / 2 = -17.5 MPa.

Taking the absolute value, the magnitude of the absolute maximum shear stress is 17.5 MPa. Doubling this value gives us 35 MPa.

To learn more about shear stress: https://brainly.com/question/20630976

#SPJ11

Answer : The resolved shear stress for the [1 1 0 1] slip system is 65.47 MPa.

Explanation :

The resolved shear stress is one of the important concepts of strength of materials. Resolved shear stress is defined as the shear stress that is produced on a specific plane when a force is applied on an angle on that plane.Stress: It is the force acting on a unit area.

Resolved Shear Stress: It is the component of shear stress that acts along a slip plane.The formula for calculating the resolved shear stress is as follows:

τ_resolved = τ_applied cos⁡ θwhere,τ_resolved = resolved shear stress.τ_applied = applied stress.θ = angle between the applied force and the slip plane.

Now, let's calculate the resolved shear stress:

Given,τ_applied = 92 MPa. θ = 45° (As the angle between the [O 0 1] direction and the slip system [1 1 0 1] is 45°).

τ_resolved = 92 × cos⁡45°τ_resolved = 92 × 0.7071 ≈ 65.47 MPa

Therefore, the resolved shear stress for the [1 1 0 1] slip system is 65.47 MPa.

Learn more about resolved shear stress here https://brainly.com/question/33224954

#SPJ11

The minimum flow of water that can be recorded is 0.1503 L/s.

Venturi meter is an instrument used to measure the flow rate of fluid in a pipeline. It works on the principle of Bernoulli's equation. A reduction in the area of the pipeline leads to an increase in the velocity of the fluid flow and a decrease in the pressure of the fluid. The diameter of the throat of the venturi meter is much smaller than the diameter of the pipeline.

The given parameters are: Diameter of throat, d1 = 4 cm. Diameter of pipeline, d2 = 10 cm. Pressure difference, ΔP = 1.5 cm. Density of water, ρ = 997 kg/m³Coefficient of venturi meter, C = 0.98Temperature, T = 25°C.

We need to calculate the minimum flow of water that can be recorded. The formula for the flow rate of fluid through the venturi meter is: Q = C x A1 x v1. Where, Q = flow rate of fluid. C = coefficient of venturi meterA1 = area of the throat of venturi meterV1 = velocity of the fluid at the throat of the venturi meter.

Area of the throat of venturi meter, A1 can be calculated as:A1 = πd1²/4A1 = (22/7) x (4/100)²/4A1 = 1.257 x 10⁻⁴ m². Using Bernoulli's equation, the velocity of the fluid at the throat of the venturi meter can be calculated as:v1 = √(2ΔP/ρ)(1 - (d1/d2)⁴).

Where,√ = square root of2 = constantΔP = pressure difference ρ = density of waterd1 = diameter of the throat of venturi meterd2 = diameter of the pipelinev1 = √(2 x 1.5/997) x (1 - (4/10)⁴) v1 = 12.06 m/s.

The minimum flow of water can be calculated as:Q = 0.98 x 1.257 x 10⁻⁴ x 12.06Q = 1.503 x 10⁻⁴ m³/sQ = 0.1503 L/s. Hence, the minimum flow of water that can be recorded is 0.1503 L/s.

know more about Venturi meter

https://brainly.com/question/31568980

#SPJ11

There are rotational and nonrotational types of machined parts. Option (a) boring and option (d) planing are two examples of operations that produce nonrotational geometries.

Boring is a type of machining that enlarges an existing hole to the desired diameter, resulting in a straight, parallel-walled cylinder. Planing, on the other hand, removes material in a linear fashion to create flat surfaces. A surface with straight edges and a flat surface are the resulting shapes.

Rotational geometries can be created through operations like drilling and turning. The process of drilling involves removing material in a rotary motion to form a hole that has a circular cross-section. In contrast, turning is the process of removing material with a rotating cutting tool to create round geometries.

Depending on the milling process used, milling can result in both rotational and nonrotational geometries. Nonrotational geometries are produced by moving the cutting tool in a linear motion while rotational geometries are produced by rotating the workpiece in some milling processes.

To know more about Machined click here:

brainly.com/question/16121470

#SPJ4

Tech A is correct. When measuring the available voltage, it is essential to have a good ground reference. The common (black) lead of the digital multimeter (DMM) should be connected to a known good ground point to establish a reference point for voltage measurements. This ensures accurate voltage readings and prevents potential measurement errors.

On the other hand, Tech B's statement regarding resistance reading on a lightbulb is incorrect. To measure resistance, the lightbulb needs to be disconnected from the circuit. The DMM should be set to the resistance (ohms) mode, and the probes should be connected to each side of the bulb, ensuring there is no voltage applied. The switch should be in the off position to prevent any potential voltage or current flow through the bulb during the resistance measurement. This ensures an accurate reading of the resistance of the lightbulb.

Learn more about digital multimeter (DMM) here:

https://brainly.com/question/29737388

#SPJ11

Answer:

hello the figure attached to your question is missing attached below is the missing diagram

answer :

i) 1.347 kW

ii) 1.6192 kW

Explanation:

Attached below is the detailed solution to the problem above

First step : Calculate for Enthalpy

h1 - hf = -3909.9 kJ/kg ( For saturated liquid nitrogen at 600 kPa )

h2- hg = -222.5 kJ/kg ( For saturated vapor nitrogen at 600 kPa )

second step : Calculate the rate of heat transfer in boiler

Q1-2 = m( h2 - h1 )  = 0.008( -222.5 -(-390.9) = 1.347 kW

step 3 : find the enthalpy of superheated Nitrogen at 600 Kpa and 280 K

from the super heated Nitrogen table

h3 = -20.1 kJ/kg

step 4 : calculate the rate of heat transfer in the super heater

Q2-3 = m ( h3 - h2 )

        = 0.008 ( -20.1 -(-222.5 ) = 1.6192 kW

Answer:

Explanation:

a) To construct an NPDA that accepts the language L1 = L(aaa*bab), we can follow these steps:

Start with a single initial state, q0.

Create a transition from q0 to a new state, q1, upon reading 'a'.

From q1, create a transition to q2 upon reading 'a' again.

From q2, create a transition to q3 upon reading 'a' again.

From q3, create a transition to q3 upon reading 'a' (looping on 'a').

From q3, create a transition to q4 upon reading 'b'.

From q4, create a transition to q5 upon reading 'a'.

From q5, create a transition to q6 upon reading 'b'.

From q6, create a transition to a new state, q7, upon reading the end of the input symbol ('$').

Additionally, make sure to include empty transitions (epsilon transitions) for transitions that do not consume any input symbols.

b) To construct an NPDA that accepts the language L2 = L(aababa), we can follow these steps:

Start with a single initial state, q0.

Create a transition from q0 to a new state, q1, upon reading 'a'.

From q1, create a transition to q2 upon reading 'a'.

From q2, create a transition to q3 upon reading 'b'.

From q3, create a transition to q4 upon reading 'a'.

From q4, create a transition to q5 upon reading 'a' (looping on 'a').

From q5, create a transition to q6 upon reading 'b'.

From q6, create a transition to a new state, q7, upon reading the end of the input symbol ('$').

c) To construct an NPDA that accepts the union of L1 and L2, we can combine the NPDA for L1 and the NPDA for L2 as follows:

Create a new initial state, q0, and connect it with epsilon transitions to the initial states of the NPDA for L1 and L2.

Connect the accepting states of the NPDA for L1 and L2 with epsilon transitions to a new accepting state.

This combined NPDA will accept strings that belong to either L1 or L2, representing the union of the two languages.

The representation of each of the following signed decimal numbers in the 2's complement system is given:

In the 2's complement system, positive numbers are represented as their binary equivalent, while negative numbers are represented by taking the 2's complement of their absolute value.

The sign bit, the leftmost bit, indicates the sign of the number: 0 for positive and 1 for negative.

For +32, the binary representation is 00100000, with the sign bit as 0.

For -128 +169, the binary representation is 10011001. The sign bit is 1, indicating a negative number.

For -127, the binary representation is 10000001.

For -55, the binary representation is 11001001.

By using 8 bits, including the sign bit, we accurately represent each number in the 2's complement system.

Read more about 2's complement system here:

https://brainly.com/question/29994558

#SPJ4

The implementation of the function should be like this:

let headless xs = List.map (fun x -> List.tail x) xs;

In order to solve the given problem, you should use F# programming language. Now, let's understand the given problem before solving it. The problem is that you have to create a function named "headless xs". This function should take a list of lists xs and remove the first element in all the sub-lists. None of the sublists are empty.

Let's implement the function step by step:

Step 1: Create an F# function with name "headless"let headless xs =

Step 2: Use List.map function to remove the first element of all the sublists.let headless xs = List.map (fun x -> List.tail x) xs; Here, the above implementation of the headless function uses List.map function to map the list xs. It removes the first element of each sublist. For removing the first element, we used List.tail function which returns all the elements except the head (first element) of the list xs.

Therefore, the implementation of the function should be like this:Implementation:

let headless xs = List.map (fun x -> List.tail x) xs;

The final implementation of the function is:

let headless xs = List.map (fun x -> List.tail x) xs;

Therefore, the implementation of the function should be like this:let headless xs = List.map (fun x -> List.tail x) xs;

Learn more about function:

https://brainly.com/question/28973926

#SPJ11

Answer:

E

Explanation:

I have a big brain and I just took the test and got it correct.

Answer:

PERT Chart and GANTT Chart

As the project manager of a residential construction project, I will prefer the PERT chart to the GANTT chart because a PERT chart displays task dependencies unlike a Gantt chart.  With the PERT chart, the sequence of tasks is clearly mapped out.  Dependent tasks are carried out when other tasks that they depend on have been executed.

Explanation:

By definition, a Gantt chart is like a bar chart that lays out project tasks and timelines using bars.  On the other hand, a PERT chart follows a structure in the form of flow charts or network diagrams.  It displays all the project tasks in separate boxes.  The boxes are then connected with arrows which clearly show the task dependencies.

An NMOS transistor which is operating in linear region is found to have a resistance of 1M22. Assume the channel length is 5um, (W/L) = 5, ID = 100ŅA, V th = 0.5V, and VGS = 3V. The new overdrive voltage (VGS') to increase the resistance to 6 MΩ is the initial overdrive voltage (VGS_initial) minus 0.1017 V.

To find the new channel width (W') and the new overdrive voltage (VGS') for the given conditions, we can use the following equations:

   To find the new channel width (W') to increase the resistance to 4 MΩ:

   We have the initial resistance (R_initial) as 1.22 MΩ and the desired resistance (R_desired) as 4 MΩ.

The resistance formula for an NMOS transistor operating in the linear region is:

R = (ρ * L) / (W * mu_n * Cox)

where ρ is the resistivity of the material, L is the channel length, W is the channel width, mu_n is the electron mobility, and Cox is the oxide capacitance per unit area.

R_initial = (ρ * L) / (W * mu_n * Cox) ---(1)

R_desired = (ρ * L) / (W' * mu_n * Cox) ---(2)

Dividing equation (1) by equation (2), we get:

R_initial / R_desired = W' / W

Substituting the given values:

1.22 MΩ / 4 MΩ = W' / (5 * W)

Simplifying the equation:

W' = (1.22 MΩ * 5 * W) / 4 MΩ

W' = 6.1 * W

Therefore, the new channel width (W') to increase the resistance to 4 MΩ is 6.1 times the initial channel width.

   To find the new overdrive voltage (VGS') to increase the resistance to 6 MΩ:

   We have the initial resistance (R_initial) as 1.22 MΩ and the desired resistance (R_desired) as 6 MΩ.

Using the resistance formula and rearranging for VGS':

R_initial = (ρ * L) / (W * mu_n * Cox) * (VGS_initial - Vth) ---(3)

R_desired = (ρ * L) / (W * mu_n * Cox) * (VGS' - Vth) ---(4)

Dividing equation (3) by equation (4), we get:

R_initial / R_desired = (VGS_initial - Vth) / (VGS' - Vth)

Substituting the given values:

1.22 MΩ / 6 MΩ = (VGS_initial - 0.5 V) / (VGS' - 0.5 V)

Simplifying the equation:

VGS' = VGS_initial - (1.22 MΩ / 6 MΩ) * 0.5 V

VGS' = VGS_initial - 0.1017 V

Therefore, the new overdrive voltage (VGS') to increase the resistance to 6 MΩ is the initial overdrive voltage (VGS_initial) minus 0.1017 V.

To learn more about NMOS transistor visit: https://brainly.com/question/30663677

#SPJ11

The correct answer is A. effective. Organizations should work to improve process capability so that quality control efforts can become more effective.

Process capability refers to the ability of the process to generate products that are within the required specifications. When the process capability is high, there will be fewer errors and defects in the final product. As a result, quality control efforts will become more effective. Quality control involves the processes and activities that are used to ensure that the final product meets the required quality standards. Quality control is an important part of any organization that wants to produce high-quality products that meet the needs of its customers. Improving process capability is one way to enhance quality control efforts. When process capability is improved, the processes become more consistent, and there is less variation in the final product. This means that it is easier to identify any issues that arise during the quality control process and to take corrective action. This leads to more effective quality control efforts, which ultimately results in higher quality products. In conclusion, organizations should work to improve process capability so that quality control efforts can become more effective.

Learn more about Organizations here:-

https://brainly.com/question/28039920

#SPJ11

The correct option is D, `/etc/` is the directory that the filesystem hierarchy standard (FHS) recommends for locating configuration files. It is a standard directory on Unix and Unix-like operating systems. System-wide configuration files are located in the `/etc/` directory.

The FHS is a set of guidelines and practices for the layout of the file system of Unix-like operating systems. It defines the directory structure and the contents of many directories, including `/etc/`. This directory contains system-wide configuration files that are used by various applications and services on the system. The directory hierarchy is defined by the FHS so that any Unix-like operating system follows a standard file system layout. This makes it easier to manage and maintain systems because the locations of files and directories are consistent across different systems. A configuration file contains information about how a program should behave. It is usually a simple text file that can be edited with a text editor. Configuration files are used to configure many system and application settings, such as network configuration, user preferences, and system settings. They are stored in the `/etc/` directory by convention.

Therefore, `/etc/` is the directory that the filesystem hierarchy standard (FHS) recommends for locating configuration files.

know more about filesystem hierarchy standard

https://brainly.com/question/32065522

#SPJ11

The code for a limit order to sell 2,500 shares of Oracle stock (ticker symbol: ORCL) at $40.00 a share would be "S2500orcl40".

Let's break down this code to understand its components and their meanings.

The first character in the code is 'S', which indicates a "sell" order. It signifies that the intention is to sell the specified number of shares rather than buying them.

Next, "2500" represents the quantity of shares to be sold. In this case, it is 2,500 shares of Oracle stock.

The ticker symbol for Oracle stock is "orcl". Ticker symbols are typically written in uppercase letters for "buy" orders, but for a "sell" order, they are written in lowercase letters.

The code continues with "40", which represents the requested price per share in pennies. In this scenario, the limit order specifies a selling price of $40.00 per share. The price is converted to pennies for uniformity in the order code.

By combining these elements together, we have the complete code "S2500orcl40" for a limit order to sell 2,500 shares of Oracle stock at $40.00 per share.

It's important to note that the order code should adhere to certain rules, such as not including special characters like commas or hyphens. It should only consist of letters and numbers for accurate processing in the stock trading system.

This code effectively communicates the details of the limit sell order for the desired quantity and price, allowing the stock trading system to execute the order accurately and efficiently.

Learn more about code  here:-

https://brainly.com/question/27397986
#SPJ11

Consider the given state of stress. Take X = 36 MPa and Y = 65 MPa. The maximum shearing stress when σz = +24 MPa is 28.03 MPa. The maximum shearing stress when σz = -24 MPa is also 28.03 MPa.the maximum shearing stress when σz = 0 MPa is 14.5 MPa.

To determine the maximum shearing stress in each case, we need to use the following formulas:

  Maximum Shearing Stress (τmax) = (σx - σy) / 2

  Principal Stress (σ1, σ2) = (σx + σy) / 2 ± √[((σx - σy) / 2)^2 + τzx^2]

Given:

σx = 36 MPa

σy = 65 MPa

Let's calculate the maximum shearing stress for each value of σz:

Case 1: σz = +24 MPa

Using the formula for principal stress, we have:

σ1 = (36 + 65) / 2 + √[((36 - 65) / 2)^2 + (24^2)]

= 50.5 + √[(-14.5)^2 + 576]

= 50.5 + √(210.25 + 576)

= 50.5 + √(786.25)

= 50.5 + 28.03

= 78.53 MPa

σ2 = (36 + 65) / 2 - √[((36 - 65) / 2)^2 + (24^2)]

= 50.5 - √[(-14.5)^2 + 576]

= 50.5 - √(210.25 + 576)

= 50.5 - √(786.25)

= 50.5 - 28.03

= 22.47 MPa

Now, let's calculate the maximum shearing stress using the formula:

τmax = (σ1 - σ2) / 2

= (78.53 - 22.47) / 2

= 56.06 / 2

= 28.03 MPa

Therefore, the maximum shearing stress when σz = +24 MPa is 28.03 MPa.

Case 2: σz = -24 MPa

Following the same steps, we have:

σ1 = (36 + 65) / 2 + √[((36 - 65) / 2)^2 + (-24^2)]

= 50.5 + √[(-14.5)^2 + 576]

= 50.5 + √(210.25 + 576)

= 50.5 + √(786.25)

= 50.5 + 28.03

= 78.53 MPa

σ2 = (36 + 65) / 2 - √[((36 - 65) / 2)^2 + (-24^2)]

= 50.5 - √[(-14.5)^2 + 576]

= 50.5 - √(210.25 + 576)

= 50.5 - √(786.25)

= 50.5 - 28.03

= 22.47 MPa

τmax = (σ1 - σ2) / 2

= (78.53 - 22.47) / 2

= 56.06 / 2

= 28.03 MPa

Therefore, the maximum shearing stress when σz = -24 MPa is also 28.03 MPa.

Case 3: σz = 0 MPa

Using the same approach, we have:

σ1 = (36 + 65) / 2 + √[((36 - 65) / 2)^2 + (0^2)]

= 50.5 + √[(-14.5)^2 + 0]

= 50.5 + √(210.25)

= 50.5 + 14.5

= 65 MPa

σ2 = (36 + 65) / 2 - √[((36 - 65) / 2)^2 + (0^2)]

= 50.5 - √[(-14.5)^2 + 0]

= 50.5 - √(210.25)

= 50.5 - 14.5

= 36 MPa

τmax = (σ1 - σ2) / 2

= (65 - 36) / 2

= 29 / 2

= 14.5 MPa

Therefore, the maximum shearing stress when σz = 0 MPa is 14.5 MPa.

To learn more about shearing stress visit: https://brainly.com/question/30407832

#SPJ11

To create an HTML5-compliant web page using JavaScript, primarily using loops, and create an array with 100 elements, you need to follow the below steps:

Step 1: First, create an HTML file with the ".html" extension. This is done using any text editor such as Notepad or TextEdit. In the HTML file, the document type should be set to HTML5. This can be done using the following code:

Step 2: Next, you need to create an HTML5-compliant structure. The basic structure of an HTML5 document includes the html, head, and body tags.

You can use the following code to create the basic structure:                

My Web Page                        

Step 3: Now, you need to create an array with 100 elements using a loop.

You can use the following code to create an array with 100 elements:

var myArray = []; for (var i = 0; i < 100; i++) {     myArray[i] = i + 1; }

Step 4: Finally, you need to display the array on the web page.

You can use the following code to display the array:

var arrayString = ""; for (var i = 0; i < myArray.length; i++) {     arrayString += myArray[i] + ", "; } document.

write("Array: " + arrayString);

The above code will create an array with 100 elements using a loop and display it on the web page.

The complete code for creating an HTML5-compliant web page using JavaScript, primarily using loops, and creating an array with 100 elements is shown below.              

My Web Page                                

var myArray = [];            

for (var i = 0; i < 100; i++) {                

myArray[i] = i + 1;             }            

var arrayString = "";            

for (var i = 0; i < myArray.length; i++) {                

arrayString += myArray[i] + ", ";             }            

document.write("Array: " + arrayString);              

The above code will create a web page that displays an array with 100 elements. The array is created using a loop and is displayed on the web page using JavaScript. The code is HTML5 compliant and can be run on any web browser that supports HTML5.

know more about HTML5-compliant

https://brainly.com/question/30880759

#SPJ11

Answer:

No,  it is not a periodic Signal

Explanation:

No,  it is not a periodic Signal

This signal is repeating itself with the fixed on and off values but the major point to note here is that is this signal repeating after a fixed length of time every time. No, such information is provided in the question and hence, this signal cannot be termed as periodic.

The given diagram is not available to determine whether the given statement is true or false. Therefore, the answer can not be provided.

An operational amplifier circuit that gives an output that is a linear function of the input is an inverting amplifier circuit.11. The non-inverting amplifier circuit will always have a voltage gain of 1.12. The integrator circuit will give an output that is proportional to the integral of the input voltage.13. The given operational amplifier circuit can be redrawn as:Now, as per the circuit, the output will be = 3V - V2 or 3 times the difference between V1 and V2.Therefore, the correct option is (B).14. As per the given circuit diagram, the relay will be activated when the thermistor resistance is less than 100 Ω.Therefore, the correct option is (A).15. The given diagram is not available to determine whether the given statement is true or false. Therefore, the answer can not be provided.

Learn more about  operational amplifier circuit here:

https://brainly.com/question/32294201

#SPJ11

The maximum po without causing yielding if N = 50 x 10⁶ N is -35.14 MPa..

Exercise 7.9.2 is given as follows:A thin-walled hollow sphere of 2 m diameter is exposed to an internal pressure, po. The thickness of the wall is 5 mm, and the material's yield stress is 250 MPa. To determine the maximum internal pressure po, which does not cause yielding, utilize both the Tresca and von Mises yield criteria.Solution:The radius of the sphere, R = 1 m = 1000 mmThe wall thickness, t = 5 mmTherefore, the inner radius, r = R - t = 1000 - 5 = 995 mm = 0.995 mThe following formulas can be used to calculate maximum internal pressure po using the Tresca and von Mises yield criteria:Tresca Yield Criteria:t=2sy/√3{((po/pi)+(p0/pi))/((po/pi)-(p0/pi))}=2(250)/√3{((po/pi)+(0))/((po/pi)-(0))}=(500/√3)(po/(pi-po))Here, the pi is the initial pressure, and po is the internal pressure to be determined.Von Mises Yield Criteria:t=2sy/√(3){√(1+4((po/pi)-(p0/pi))^2-1}=2(250)/√(3){√(1+4((po/pi)-0)^2-1}=(500/√(3)){√(4((po/pi))^2+3}/(2(po/pi))Here, the pi is the initial pressure, and po is the internal pressure to be determined.For both Tresca and von Mises yield criteria, we need to substitute the values and solve the equations.(500/√3)(po/(pi-po))=(500/√(3)){√(4((po/pi))^2+3}/(2(po/pi))(po/(pi-po))={√(4((po/pi))^2+3)}/(2(pi/pi-pi))=√(4((po/pi))^2+3)/((pi-po)/pi)√(4((po/pi))^2+3)=(po/pi-po)(√(3)/2)4((po/pi))^2+3=(3/4)(po/pi-po)^2Solving the above equation, we get the value of po. Therefore, po = 2.25 pi N/m².Exercise 7.9.3 is given as follows:The maximum po that does not cause yielding is to be determined if N = 50 x 10^6 N (compression).Solution:The value of N is given in the negative direction because it is in compression.In this case, we have the following formulas for the maximum pressure po:Tresca Yield Criteria:σ1-σ2=(p0+po)(1/r-1/R)=N/Aσ1+σ2=(p0+po)/2σ1-σ2=2sy/√3√3(p0+po)/(R-r)=2sy/√3N/A=(R-r)/2σ1+σ2=2sy/3+σ2=2sy/3+(p0+po)/2For σ1,σ2, we have the following relations:σ1+σ2=(p0+po)/2σ1-σ2=2sy/√3Therefore,σ1=(p0+po)/2+(sy/√3)σ2=(p0+po)/2-(sy/√3)We can now replace σ1, σ2 in the first equation to get the value of po. After solving for po, we get po = -35.14 MPa.

Learn more about diameter here,

https://brainly.com/question/28162977

#SPJ11

If you observe an apple lying under the tree from where it fell, it is due to the sunlight, which serves as a solar radiation source, directly reaching it.

Solar energy, including the visible spectrum, moves straight ahead until it meets with an obstacle or gets dispersed due to particles present in the atmosphere.

The presence of an apple tree creates a shaded area, as its abundant branches and leaves obstruct a fraction of sunlight from hitting the ground. Nonetheless, gaps in the foliage allow sunlight to permeate and reach the earth's surface.

The Direct Path occurs when the shadow of an apple hanging from a tree falls straight onto the ground, resulting in a shaded spot where the apple obstructs the flow of sunlight.

Learn more about radiation from

https://brainly.com/question/31285748

#SPJ4

If you want a member to be accessible to all external codes, the access modifier you should use is public. The public access modifier allows members to be accessible from any other code, either within or outside of the same assembly or program.

There are four access modifiers in C# which are private, protected, public, and internal. When an access modifier is applied to a member of a class, it dictates the level of visibility or accessibility of the member to other codes or other classes.

Here's a brief explanation of the four access modifiers:

Private - members are accessible only within the containing class.

Protected - members are accessible within the containing class and within any subclass derived from the containing class.

Public - members are accessible from any code within or outside of the program or assembly. Internal - members are only accessible from within the same assembly or program.

In summary, if you want a member to be accessible to an external code, the best option is to use the public access modifier, which allows the member to be accessed from any other code.

know more about access modifiers,

https://brainly.com/question/30899072

#SPJ11

Answer: i got you its d

Explanation:had the smae question as you