explain the differences between pitch and loudness and what are they connected to?

Answer:

Answer is A

Explanation:

As we know , for constant velocity we get a straight line.

The formula for this problem is s = vt which is similar to a straight line formula like y = mx + c.

If we put here c = 0 we get the formula for distance and velocity.

So the answer is A.

The surface pressure may be higher or lower than the sea level pressure (SLP) of Falcon Field depending on various factors such as local weather conditions, elevation differences, and atmospheric disturbances.

Surface pressure refers to the atmospheric pressure measured at a specific location on the Earth's surface. It can be influenced by multiple factors, leading to variations compared to the sea level pressure (SLP) recorded at a specific elevation, in this case, 245 meters above sea level at Falcon Field.

One possible reason for the surface pressure to be higher than the SLP is the presence of a high-pressure system. High-pressure systems are associated with sinking air and can cause surface pressure to increase. Additionally, local weather conditions, such as temperature and humidity, can affect the density of the air, influencing surface pressure. For example, warmer air is less dense and can result in lower surface pressure.

Conversely, colder air is denser and can lead to higher surface pressure. Furthermore, topographical features like hills or mountains near the location can create localized pressure differences due to variations in elevation. Lastly, atmospheric disturbances, such as the passage of weather fronts or the presence of storms, can cause temporary changes in surface pressure compared to the SLP. Therefore, multiple factors need to be considered when analyzing the differences between surface pressure and the SLP at a specific location like Falcon Field.

Learn more about surface pressure here:

https://brainly.com/question/31792877

#SPJ11

The intensity of the light that emerges from the filter is 38 w/m.

According to Malus's Law, the intensity of light that passes through a polarizer is proportional to the cosine squared of the angle between the transmission axis of the polarizer and the direction of polarization of the light. The equation is given as I = I_0 cos²θ where I is the transmitted light intensity, I_0 is the incident light intensity, and θ is the angle between the polarization direction and the transmission axis of the polarizer.In this case, the incident intensity of light is 78 W/m. Since the filter is placed perpendicular to the direction of polarization of the incident light, the angle between the polarization direction and the transmission axis of the polarizer is 90°. Thus, θ = 90°, cos θ = 0, and the transmitted light intensity is zero. Therefore, the intensity of the light that emerges from the filter is 0.

Force is the degree, volume, or greatness of a thing, like fire, feeling, climate, work, or energy. The word "intensity" is frequently associated with rage, passion, and violence. It is used to talk about the intensity of things like a love affair or perhaps a flame.

Know more about intensity, here:

https://brainly.com/question/17583145

#SPJ11

Measuring the heat of chemical reactions or physical changes.

Fill in the blank: Quasars vary on a timescale of days to months. This means they must be very dynamic.

Quasars, also known as quasi-stellar objects, are extremely luminous and distant celestial objects that emit massive amounts of energy. They are powered by supermassive black holes at the centers of galaxies. The variability of quasars refers to their fluctuations in brightness over time. Observations have shown that quasars can exhibit significant changes in their luminosity on timescales ranging from days to months. The rapid variability of quasars suggests that the processes occurring in their vicinity must be highly dynamic. The variability is believed to arise from the accretion of matter onto the central black hole, which generates intense radiation and powerful jets of material. Studying the timescale of quasar variability provides insights into the physical mechanisms occurring near supermassive black holes and helps astronomers understand the nature and evolution of these fascinating cosmic objects.

To learn more about timescale, Click here:

https://brainly.com/question/32234089

#SPJ11

The density of water is 1.0 g/cm³. It's required to determine the mass of water displaced by a submerged 120-cm³ block and the buoyant force on the block.To find the mass of water displaced by a 120 cm³ block, we first need to know the mass of 1 cm³ of water, which is equal to its density, which is 1.0 g/cm³.

The volume of the block is 120 cm³, so we can calculate its mass by multiplying its volume by the density of water. Therefore, the mass of the block submerged in water is:120 cm³ × 1.0 g/cm³ = 120 gTo find the number of kilograms, we divide the value obtained by 1000. Therefore, 120 g = 0.12 kg.The buoyant force is equal to the weight of the water displaced by the block. The buoyant force equals the weight of water displaced by the object.

The weight of 1 cm³ of water is 9.8 N (newtons), which is equal to the weight of 1 g of water. We can use this to calculate the weight of water displaced by the block as follows:120 cm³ × 1.0 g/cm³ × 9.8 N/g = 1176 NTherefore, the buoyant force acting on the block is 1176 N (Newtons).

To know more about weight visit :

https://brainly.com/question/31659519

#SPJ11

A.  FALSE. In the equation, 'b' represents the y-intercept not slope.

B. TRUE. The graph of a linear function is always a straight line.

C. FALSE. The domain of the function y = √3 − x is the set of all real numbers greater than or equal to 3.
D. FALSE. The operation of function composition is not commutative

The operation of function composition is not generally commutative. For functions f and g, it's not necessarily true that f(g(x)) = g(f(x)). The order in which functions are composed can affect the result.

The domain of the function y = √(3 - x) is the set of all real numbers less than or equal to 3.

This is because for the expression under the square root to be non-negative (and thus yield a real number as output), x must be less than or equal to 3.

However, if the expression was y = √3 - x, it would have a different meaning, and the domain would be all real numbers, because √3 is a constant, and subtracting any real number x from a constant yields a real number

Find more exercises on  function composition;

https://brainly.com/question/30143914

#SPJ1

According to the twin on Earth, 11 years have passed whereas, according to the astronaut, approximately 142.10 years have passed during their journey to the distant star and back.

According to the astronaut traveling at a velocity of 0.997c, the number of years that have passed can be calculated using the concept of time dilation in special relativity.

Time dilation occurs when an object moves at speeds close to the speed of light relative to another object.

The formula for time dilation is given by:

t' = t / √(1 - v²/c²)

Where:

t' is the time experienced by the moving object (the astronaut)

t is the time experienced by the stationary object (the twin on Earth)

v is the velocity of the moving object relative to the stationary object

c is the speed of light

In this case, the astronaut is traveling at a velocity of 0.997c. Let's calculate the time experienced by the astronaut.

t' = 11 / √(1 - (0.997c)²/c²)

Calculating the square of 0.997c:

(0.997c)² = (0.997)² * c²

0.997)² * c² = 0.994009 * c²

Substituting the value back into the time dilation formula:

t' = 11 / √(1 - 0.994009 * c²/c²)

Simplifying the equation:

t' = 11 / √(1 - 0.994009)

t' = 11 / √(0.005991)

t' = 11 / 0.077453

t' ≈ 142.10 years

Therefore, according to the astronaut, approximately 142.10 years have passed during their journey to the distant star and back.

According to the twin on Earth, 11 years have passed. However, due to the effects of time dilation at the high velocity of the spaceship, the astronaut experiences a significantly longer duration of time. In this case, approximately 142.10 years have passed according to the astronaut.

To know more about astronaut visit:

https://brainly.com/question/29727760

#SPJ11

The answer that is not a statement of the second law of thermodynamics is d. Energy does not flow spontaneously by heat from a cold to a hot reservoir.

Options a, b, and c all reflect different aspects of the second law of thermodynamics, such as the preferential direction of real processes, the increase of entropy in natural processes, and the limitation on constructing a heat engine that only performs work without rejecting any heat to a colder reservoir.

However, option d contradicts the second law by suggesting the spontaneous flow of heat from a cold to a hot reservoir, making it the answer that is not a statement of the second law of thermodynamics.

To know more about second law of thermodynamics, visit,

https://brainly.com/question/30600157

#SPJ4

Answer:

I'm corona positive and isolated feeling depressed just logged in to talk someone but people ignoring me thanks for this behaviour got disappointed bye everyone logging out had a great time

On minerals and effects of mining:

Facts:

Water pollution: Mining can contaminate water with heavy metals, chemicals, and sediments. This can make water unsafe to drink, swim in, or use for irrigation.

Air pollution: Mining can release dust, fumes, and gases into the air. This can contribute to respiratory problems and other health problems.

Soil pollution: Mining can contaminate soil with heavy metals, chemicals, and sediments. This can make soil unsafe for growing crops or for other uses.

Wildlife habitat disruption: Mining can destroy wildlife habitats. This can lead to the loss of species and the disruption of ecosystems.

Climate change: Mining can contribute to climate change by releasing greenhouse gases into the atmosphere.

Find out more on mining here: https://brainly.com/question/1278689

#SPJ1

Answer:

j

Explanation:

Answer:

35/9 m/s

Explanation:

21 km = 21000 m

90 min = 90*60 s = 5400 s

21000/5400 = 35/9 m/s

a)The camera's aperture diameter is approximately 35.737 mm, b)The minimum distance from the CCD sensor during focusing is approximately infinity, c) The maximum distance from the CCD sensor during focusing is approximately infinity.

To determine the camera's aperture diameter in mm, we can use the formula for calculating the aperture diameter based on the f-number (f/3.05):

Aperture diameter = Focal length / f-number

Substituting the values into the formula, we get:

Aperture diameter = 109 mm / 3.05

Aperture diameter = 35.737 mm (rounded to three decimal places)

Now, let's calculate the minimum and maximum distances from the CCD sensor over which the lens must be able to travel during focusing.

Given:

Minimum focusing distance = 32.5 cm

Infinity focusing distance (approximated as very large) = infinity

(b) Minimum distance from the CCD sensor during focusing:

The minimum distance from the CCD sensor during focusing is the difference between the infinity focusing distance and the minimum focusing distance. Since infinity is approximated as very large, we can consider the minimum distance as:

Minimum distance = Infinity - Minimum focusing distance

Minimum distance = infinity

(c) Maximum distance from the CCD sensor during focusing:

The maximum distance from the CCD sensor during focusing is the difference between the infinity focusing distance and the minimum focusing distance. Since infinity is approximated as very large, we can consider the maximum distance as:

Maximum distance = Infinity - Minimum focusing distance

Maximum distance = infinity

To know more about aperture diameter

https://brainly.com/question/10095671

#SPJ4

The rate at which electrical energy is being dissipated in the resistor is 0.052 Watts.

What is resistor?

A resistor is an electronic component that is used to resist the flow of electric current in a circuit. It is specifically designed to have a specific resistance value, which determines how much it restricts the flow of current. Resistors are typically made of materials with high resistivity, such as carbon, metal alloys, or wire-wound materials.

Given:

Capacitance (C) = 1.99 μF = 1.99 * 10⁻⁶ F

Resistor (R) = 5.77 kΩ = 5.77 * 10³ Ω

EMF source voltage (V) = 54.3 V

First, we need to find the current flowing through the circuit. The current at any time t in an RC circuit can be given by:

I(t) = (V / R) * (1 - e⁻ᵗ⁄ ʳ×ᶜ)

At t = 0, just after the circuit is completed, we can simplify this to:

I(0) = (V / R)

Substituting the given values:

I(0) = (54.3 V) / (5.77 * 10³ Ω)

Calculating this, we find:

I(0) ≈ 0.00941 A

Now, to determine the rate at which electrical energy is being dissipated in the resistor, we use the formula for power:

P = I² * R

Substituting the value of current:

P = (0.00941 A)² * (5.77 * 10³ Ω)

Calculating this, we find:

P ≈ 0.052 W

Therefore, just after the circuit is completed at t = 0, the rate at which electrical energy is being dissipated in the resistor is approximately 0.052 Watts.

To learn more about resistor,

https://brainly.com/question/17671311

#SPJ4

Answer:

The type of bond is ionic bond also called electrovalent bond.

Explanation:

This ionic bond is formed through an electrostatic attraction between two oppositely charged atoms.

Hope this helps! :)

And also this question was already answered on Brainly if you wanna check it out.

The solution to the differential equation is then:

x(t) = 0.25e⁽⁻⁶·⁰²⁵t⁾ cos(2.181t)

And the system is underdamped because the roots of the characteristic equation have a non-zero imaginary part.

The force required to stretch a spring is directly proportional to the amount the spring is stretched. This relationship is known as Hooke’s Law. It can be expressed mathematically as:

F = -kx

Where F is the force applied to the spring, x is the displacement of the spring from its equilibrium position, and k is the spring constant.

For a mass-spring system under the influence of a damping force, the differential equation governing the system is:

m(d2x/dt2) + c(dx/dt) + kx = 0

where m is the mass of the object attached to the spring, c is the damping coefficient, and k is the spring constant.

The given force of 2 lb stretches the spring by 1 ft, so the spring constant is given by k = F/x = 2/1 = 2 lb/ft.

The 8-lb weight is released 4 in. above the equilibrium position, which is 0.25 ft. The initial displacement is therefore x(0) = 0.25 ft, and the initial velocity is v(0) = 0. The damping force is given by f_d = -3/2v. Using the values given, the differential equation for the system is:

m(d2x/dt2) + c(dx/dt) + kx = 0 (1)

The values of m, k, and c are given by

m = 8/g = 8/32.2 = 0.248 kg

k = 2/lb/ft * 0.4536 kg/lb * 0.3048 m/ft = 0.294 kg/sm = 0.248 kgc = 3/2

The equation of motion is then:

d2x/dt2 + 12.05dx/dt + 1.186x = 0 (2)

where we have substituted the values of m, c, and k into equation (1).

The characteristic equation is:

r2 + 12.05r + 1.186 = 0 (3)

Solving for the roots of the characteristic equation, we find:

r = (-12.05 ± √(12.052 - 4(1.186)))/2= -6.025 ± 2.181i

The roots are complex conjugates, so the solution to the differential equation can be written as:

x(t) = e⁽⁻⁶·⁰²⁵t⁾(C₁ cos(2.181t) + C₂ sin(2.181t)) (4)

The initial displacement and velocity are given by x(0) = 0.25 and v(0) = 0.

Substituting these values into equation (4) and taking the derivative, we get:

x(0) = C₁ = 0.25dx/dt|t=0 = -6.025

C₂ = 0

Solving for C₁ and C₂, we get:

C₁ = 0.25C2 = 0

The solution to the differential equation is then:

x(t) = 0.25e⁽⁻⁶·⁰²⁵t⁾ cos(2.181t) (5)

The system is underdamped because the roots of the characteristic equation have a non-zero imaginary part.

Learn more about the forces at:

https://brainly.com/question/17063178

#SPJ11

The work done by the person to climb some stairs at a constant rate and gain 2.8 meters in height is approximately 2605.86 J.

The work done by the person can be calculated using the formula W = Fd where W is the work done, F is the force applied and d is the distance moved in the direction of the force.

In this case, the force applied is equal to the weight of the person which can be calculated using the formula F = mg where m is the mass of the person and g is the acceleration due to gravity which is approximately 9.81 m/s².

Given that the mass of the person is 95 kg, we can calculate the force applied as follows:

F = mg = (95 kg)(9.81 m/s²) = 931.95 N

The distance moved in the direction of the force is equal to the height gained which is 2.8 meters.

Now we can substitute these values into the formula for work done:

W = Fd

W = (931.95 N)×(2.8 m)

W ≈ 2605.86 J

Therefore, the work done by the person to climb some stairs at a constant rate and gain 2.8 meters in height is approximately 2605.86 J.

To know more about force

https://brainly.com/question/12970081

#SPJ4

The given system consists of two 8.0-cm-diameter circular plates separated by 0.95 cm, which are filled with milk. The capacitance of the system can be calculated as follows:Explanation:Capacitance is defined as the charge stored per unit potential difference,using the formula C = Q/V, where C is capacitance, Q is charge, and V is potential difference.

In this case, the capacitance of the system can be calculated using the formula for the capacitance of parallel plate capacitors:

[tex]C = εA/d[/tex],

where C is capacitance, ε is the permittivity of free space, A is the area of each plate, and d is the distance between the plates.The area of each plate can be calculated using the formula for the area of a circle:

[tex]A = πr²[/tex],

where r is the radius of the circle.Substituting the given values into the formula, we get:

[tex]C = εA/dC = (8.85 × 10⁻¹² F/m) × [(π × (8.0/2 × 10⁻² m)²)/0.95 × 10⁻² m]C = 6.21 × 10⁻¹⁰ F[/tex]

Thus, the capacitance of the system is [tex]6.21 × 10⁻¹⁰ F[/tex].

The amount of charge on each plate when they are fully charged can be calculated using the formula Q = CV, where Q is charge, C is capacitance, and V is potential difference.Substituting the given values into the formula, we get:

[tex]Q = CVQ = (6.21 × 10⁻¹⁰ F) × (30,000 V)Q = 1.86 × 10⁻⁵ C[/tex]

Thus, the amount of charge on each plate when they are fully charged is [tex]1.86 × 10⁻⁵ C[/tex].

To know more about capacitance visit :

https://brainly.com/question/31871398

#SPJ11

Answer:

680.4

Explanation:

the formula is V1 over T1 is equals (=) to V2 over T2 .

and we have been given that

V1 represents 315

T1 represents 25°c

V2 is unknown and what we're finding

T2 represents 54°c

so 315×54 all over 25 ...gives you 680.4

As a result, electrons are in high potential energy, and the object A has a negative potential.

Two identical metal objects are insulated from their surroundings. Object A has a net charge of excess electrons. Object B is grounded.  The object at a higher potential is the object with excess electrons which is object A. The correct option is: A .In grounded object, the excess charges will neutralize and are canceled out by opposite charges from the earth, resulting in the object having no charge or neutral. Therefore, object B is neutral. On the other hand, Object A has an excess of electrons that create an electrostatic repulsive force, with each electron repelling each other.

Know more about potential   here:

https://brainly.com/question/9349250

#SPJ11

Answer:

40 cm

Explanation:

Since Bob pulls with a force of F = 200 N when the spring is attached to the wall and it extends a length x = 20 cm, from Hooke's law,

F = kx where k = spring constant

So, k = F/x = 200 N/20 cm = 10 N/cm

Now, sine both Bob and Carlos pull with a force of F = 200 N in opposite directions, the spring stretches about its center and has an extension, x' in each direction.

So, from F = kx

x = F/k = 200 N/10 N/cm = 20 cm

So, the spring stretches 20 cm in both directions.

So, the total extension is thus x' + x' = 2x' = 2(20 cm) = 40 cm

The spring will stretch 40 cm.When a force is act om the spring the spring will stretch or compress depeds on the application of force.

Hooke's law states that the force used to extend the spring is directly equal to the amount of stretch.

The force needed to extend the spring is proportional to its displacement. It is stated as

F=Kx

The given data in the problem is;

F is the force of pull to bob=  200 N

x is the length of extension= 20 cm.

F' is the force act on the another end=  200 N

According to Hooke's law,

[tex]\rm F = Kx \\\\ \rm K= \frac{F}{x} \\\\ \rm K= \frac{200}{20} \\\\ \rm K=10 \ N/cm[/tex]

The extension due to another end force is found by;

[tex]\rm x' = \frac{F}{K} \\\\ \rm x' = \frac{200}{10} \\\\ \rm x' = 20[/tex]

The total extension of the spring will be;

[tex]\rm x_t = x+x' \\\\ \rm x_t = 2(20) \\\\ \rm x_t =40\ cm[/tex]

Hence the spring will stretch 40 cm.

To learn more about the hooke's law refer to the link;

https://brainly.com/question/13348278

a)Therefore, the work required to assemble this charge distribution is approximately 0 J. b)Therefore, the magnitude of the electric field at a point (0, +3 m) on the y-axis is 90 kN/C. c)Therefore, the magnitude of the force on the 1 μC charge is 0.03 N (approximately) are the answers.

Given information: A point charge of +10 μC is at (+3 m, 0 m) on the x-axis and a point charge of +10 μC is at (-3 m,0 m).

a. Determine the work required to assemble this charge distribution. The work done to assemble this charge distribution is the sum of the work done to bring each charge to its respective position.

It can be calculated using the formula as follows;

W = (1/4πε0)(q1q2/r1 + q1q2/r2)

where

ε0 = permittivity of free space = 8.85 × 10−12 C2/Nm2q1

= +10 μC, q2 = +10 μCr1 = +3m,

r2 = +3m

W = (1/4πε0)(q1q2/r1 + q1q2/r2)

= (1/4π × 8.85 × 10−12 × 10 × 10 × 106 )/(3 + 3) J= 4.44 × 10−7 J ≈ 0 J (approximately).

Therefore, the work required to assemble this charge distribution is approximately 0 J.

b. Find the magnitude of the electric field at a point (0,+3 m) on the y-axis. The electric field at a point on the y-axis due to the charges can be calculated by using the formula as follows;

E = (1/4πε0)(q/r1^2 − q/r2^2),

where q = +10 μCr1 = +3m,

r2 = +3mE = (1/4πε0)(q/r1^2 − q/r2^2)

r2= (1/4π × 8.85 × 10−12 × 10 × 106 )/(32 − 32) N/C

r2= (1/4πε0)(q/r1^2)= (1/4π × 8.85 × 10−12 × 10 × 106 )/(3^2) N/C

r2= 9 × 10^4 N/C. To get the answer in kN/C,

the answer can be divided by 1000.

E = 9 × 10^4 x 10^-3 = 9 × 10^1 kN/C C = 90 kN/C.

Therefore, the magnitude of the electric field at a point (0, +3 m) on the y-axis is 90 kN/C.

c. A charge q= +1 μC is placed at a point (0,+3 m) on the y-axis. Find the magnitude of the force on the 1 μC charge.

The force on the 1 μC charge due to the charges can be calculated using Coulomb's law.

Coulomb's law is given by;

F = (1/4πε0)(q1q2/r^2)

where

ε0 = permittivity of free space = 8.85 × 10−12 C2/Nm2q1

= +10 μC, q2 = +1 μCr = +3mF

= (1/4πε0)(q1q2/r^2)

=(1/4π × 8.85 × 10−12 × 10 × 1 × 106 )/(3^2) N

= 2.96 × 10−2 N ≈ 0.03 N (approximately).

to know more about magnitude visit:

https://brainly.com/question/28714281

#SPJ11

The movement of the action potential down the length of the axon is a crucial process in neural communication.

The action potential is an electrical signal that allows neurons to transmit information throughout the nervous system. When a neuron receives a stimulus, it undergoes a rapid change in membrane potential, resulting in the generation of an action potential.

This electrical impulse travels down the length of the axon, which is the long, slender projection of the neuron. The movement of the action potential is facilitated by a series of events. Initially, the depolarization of the neuron's membrane triggers the opening of voltage-gated sodium channels, leading to an influx of sodium ions.

This influx of positive charge further depolarizes the membrane, propagating the action potential along the axon. As the action potential travels, the depolarization in one region of the axon triggers the opening of voltage-gated sodium channels in the adjacent region, allowing the action potential to continue its journey.

This process of depolarization and propagation repeats along the length of the axon until the action potential reaches the axon terminal. At the axon terminal, the action potential triggers the release of neurotransmitters, which transmit the signal to the next neuron or target cell.

To learn more about action potential here:

https://brainly.com/question/4305583

#SPJ11

B: the maximum speed of the emitted electrons decreases.

The photoelectric effect is the phenomenon where electrons are emitted from a metal surface when light of sufficient energy, or frequency, falls on it. The energy of a photon of light is directly proportional to its frequency (E = hf), where h is Planck's constant and f is the frequency of the light.

When the frequency of the incident light is decreased, the energy of each photon decreases. According to the photoelectric effect equation (E = hf = Φ + 1/2mv²), where Φ is the work function of the metal and v is the speed of the emitted electron, if the energy of the incident photon is lower than the work function, no electrons will be emitted.

Since the frequency of the light is directly related to its energy, decreasing the frequency decreases the energy of the photons. Consequently, fewer electrons will have sufficient energy to overcome the work function and be emitted from the metal. Therefore, the number of electrons emitted from the metal decreases.

Furthermore, the maximum speed of the emitted electrons is determined by the energy of the incident photons. With decreased frequency and lower energy photons, the maximum kinetic energy of the emitted electrons decreases. As kinetic energy is directly proportional to the square of the velocity (1/2mv²), the maximum speed of the emitted electrons decreases.

The correct answer is B: the maximum speed of the emitted electrons decreases. As the frequency of the incident light is decreased, the number of electrons emitted from the metal also decreases, and the maximum speed of the emitted electrons decreases due to the lower energy of the incident photons.

To know more about electrons visit :

https://brainly.com/question/860094

#SPJ11

Answer:

The water is stored in ice sheets and as snow

Explanation:

Temperature reduces with an increase in altitudes. The standard laps rate is 6.5°C per 1,000 m gained in elevation

At very high elevations, therefore,  the air is usually very cold such that when an elevation of 4,500 meters is reached at the equator, it is possible to observe snowfall and the water remain temporarily stored on the surface of the mountain as ice and snow

Answer:2,030

Explanation:

40 atm x 10.0 L = 400

400/0.197 atm = 2,030

An engine uses 5280 j of input heat to do 702 j of work. The heat rejected into the air is 4578 J.

In this case, we can use the first law of thermodynamics, which states that the heat input to a system is equal to the work done by the system plus the heat rejected or lost.

Given:

Input heat (Qin) = 5280 J

Work done (W) = 702 J

The equation for the first law of thermodynamics is:

Qin = W + Qout,

where Qin is the input heat, W is the work done, and Qout is the heat rejected.

Rearranging the equation to solve for Qout:

Qout = Qin - W.

Substituting the given values:

Qout = 5280 J - 702 J.

Calculating the result:

Qout = 4578 J.

Therefore, the heat rejected into the air is 4578 J.

To know more about heat, refer here:

https://brainly.com/question/2427061#

#SPJ11