The Barnum Company has total assets of $39,780, net working capital of $4,760, owner's equity of $17,000, and long-term liabilities of $11,900. What is the value of the current assets:
a: $2,800 b: $5,600 c: $15,560 d: $18,450

The auditor's first assessment of materiality is the largest deviation from the truth that they feel the financial statements might have without having an impact on the choices of reasonable users.

How do you set performance materiality?

In order to compute performance materiality, the overall materiality value is often multiplied by a percentage between 50% and 75%. This computation is not mechanical because expert judgement is also used.

The auditor first evaluates the total degree of materiality for each financial statement balance before reaching a preliminary determination concerning materiality. For the income statement and statement of financial position, respectively, it may be anticipated that mistakes totaling R100 000 and R200 000, respectively, would be considered substantial.

For the financial statements as a whole, a preliminary determination of materiality is made. The greatest amount of misrepresentation that would be deemed substantial for a specific audit segment or account balance is known as performance materiality.

Learn more about preliminary judgment:

https://brainly.com/question/31427202

#SPJ1

True. If a supplier's competitive advantage is solely based on a unique standard for its product, may not provide enough differentiation to prevent customers.

In contrast,

if a supplier's competitive advantage is based on a combination of factors, such as quality, pricing, customer service, and innovation,

it becomes much harder for customers to switch to another supplier.

As a result,

cost savings from effective supply chain management and increased profitability for businesses due to synergies between supply chain components,

supply networks can now provide a competitive advantage.

It must be possible for a company to stand out from rivals in its industry, but a competitive edge must also be challenging to swiftly copy.

The company will get off to a good start thanks to that.

To accomplish the same thing, a rival would have to put a lot of effort and resources into it.

To know more about competitive advantage, click here:

https://brainly.com/question/30194365

#SPJ11

If you find a NE that contains a non-credible threat, then it cannot be part of a - b. MSNE( Mixed strategy Nash equilibrium)and c. PSNE( Pure strategy Nash equilibrium).

Any non-credible threat that is a component of a Nash equilibrium in a sequential game cannot be played along the Nash equilibrium path. Threats that are considered credible in the Nash equilibrium are those that are not formed.

Hence, the right choicer is option b. and c.

To forecast the results of a game's decision-making interaction, Nash equilibrium is utilised. It represents an action profile for every participant. It simulates a steady state, or the combination of all players' tactics, in which no player can gain an advantage by modifying its strategy by itself.

We investigate each action profile in turn to identify the Nash equilibria. By selecting a different course of action from her present one, neither player can improve her payout.

To know more on Nash Equilibrium visit:

https://brainly.com/question/27578385

#SPJ1

The total economic surplus is $12.50.

To determine the total economic surplus, we need to find the area of the triangle formed by the demand curve and supply curve up to the equilibrium quantity, as shown in the graph below:

The equilibrium quantity is 5, so we need to find the area of the triangle formed by the points (0, 10), (5, 5), and (5, 0).

The base of the triangle is 5 units long (the equilibrium quantity), and the height is the difference between the demand price and the supply price at that quantity. At the equilibrium quantity of 5, the demand price is $10 and the supply price is $5, so the height is 10 - 5 = 5.

Therefore, the total economic surplus is: (1/2) x 5 x 5 = 12.5

So the total economic surplus is $12.50.

Learn more about economic surplus

https://brainly.com/question/14829124

#SPJ4

To find the residual sum of squares, we need to subtract the explained sum of squares from the total sum of squares.

So, residual sum of squares = total sum of squares - the explained sum of squares  = 49 - 35  = 14 Therefore, the answer is c. 14, To calculate the residual sum of squares, you can use the following formula.

Residual Sum of Squares = Total Sum of Squares - Explained Sum of Squares Given that the explained sum of squares is 35 and the total sum of squares is 49, you can plug in these values, Residual Sum of Squares = 49 - 35, So, the correct answer is c. 14.

To know more about Squares:- https://brainly.com/question/14198272

#SPJ11

The given statement "an override can never help increase a manager's total pay" is false because an override can help increase a total pay of manager.

Total pay refers to the complete amount of compensation that an employee receives from an organization, including base salary, bonuses, incentives, benefits, and any other forms of compensation.

An override is an additional commission or bonus paid to a manager on top of their regular compensation. It is often based on the sales performance of the team or department that the manager oversees.

If the team performs well and meets or exceeds certain targets, the manager's total pay can increase due to the override. Thus, an override can help increase a manager's total pay.

Learn more about managers https://brainly.com/question/17312484

#SPJ11

General managers are responsible for overseeing the overall operations of a business, and understanding accounting principles and financial statements is essential to this role. This knowledge allows managers to make informed decisions that impact the financial health of the company.

A broad knowledge of accounting principles enables managers to analyze financial reports and understand the company's financial performance. This understanding can help managers identify areas of the business that need improvement or investment. Additionally, having a strong understanding of financial statements can help managers communicate with stakeholders and investors, providing them with accurate and transparent financial information.

Ultimately, a general manager's role is to make strategic decisions that drive the business forward, and having a broad knowledge of accounting principles and financial statements allows them to do this effectively. It is essential for general managers to have this knowledge so that they can make informed decisions that are in the best interest of the company.

To know more about financial statements click here

brainly.com/question/29989878

#SPJ11

CASE 7-2 Consolidations of Airlines Since 1930, there have been about 51 airline mergers and acquisitions, according to Airlines for America.

An American airline holding company with its main office in Fort Worth, Texas, is called American Airlines Group Inc. AMR Corporation, the parent company of American Airlines and Air Choice One, and US Airways Group, the parent company of US Airways, merged on December 9, 2013, to become it.

"Consolidation is a logical way to attempt to rectify this long-standing problem, though it is not simple, risk-free, or free," he said. He predicted that a significant merger like United-US Airways would reduce capacity by up to 3%, mostly in the U.S. He said that because there are fewer seats available and more competitors, prices should increase.

To know more about CASE 7-2 Airline visit:-

https://brainly.com/question/17469342

#SPJ1

If the real GDP in a particular year is $5,000 trillion and the nominal GDP in that same year is $4,000 trillion, then the GDP price index is 125. This is because real GDP is adjusted for inflation and measures economic activity in constant prices, while nominal GDP measures economic activity in current prices.

The GDP price index, which is similar to the CPI, allows for a comparison of the two by adjusting for inflation. In this case, with a GDP price index of 125, it indicates that prices have increased by 25% from the base period.

If the real GDP in a particular year is $5,000 trillion and the nominal GDP in that same year is $4,000 trillion, then the GDP price index is 125. This means that the price level has increased by 25% since the base year. However, since real GDP has increased to $5,000 trillion, this indicates that economic activity has grown by 30%. The fact that there was no inflation from the base period can be determined from the fact that the CPI is not given and cannot be calculated with the information provided. The CPI measures the changes in prices of a basket of goods and services consumed by households, whereas the GDP price index measures the prices of all goods and services produced in an economy. Therefore, we cannot conclude that the CPI is 125 or that there has been a 40% decrease in economic activity. However, we can say that the economy has grown by 30% and the GDP price index is 125.

To know more about GDP here

https://brainly.com/question/1383956

#SPJ11

Incremental analysis:

Discontinuing laminate flooring would decrease revenue by $110,000, decrease variable costs by $60,000, and decrease direct fixed costs by $20,000, resulting in a decrease in operating income of $30,000. Therefore, discontinuing the laminate flooring product line would not add $30,000 to operating income.

Incremental analysis:

Discontinuing laminate flooring would decrease revenue by $110,000 and decrease variable costs by $60,000, resulting in a decrease in operating income of $50,000 ($110,000 - $60,000 - $31,000). Therefore, the company should not stop selling laminate flooring.

Incremental analysis:

Discontinuing laminate flooring would decrease revenue by $110,000 and decrease variable costs by $60,000, resulting in a decrease in operating income of $50,000. However, wood flooring production and sales would decline by 10%, resulting in a decrease in revenue of $80,000 and a decrease in variable costs of $40,000.

The net effect on operating income would be a decrease of $30,000 ($50,000 - $80,000 + $40,000). Therefore, the company should continue selling laminate flooring.

For more questions like Revenue click the link below:

https://brainly.com/question/8645356

#SPJ11

The capital gains rules for residential property owners state that when you sell your primary residence, you may be eligible to exclude up to $250,000 of any capital gains from the sale if you are a single filer or up to $500,000 if you are a married couple filing jointly.

To qualify for this exclusion, you must have owned and lived in the property as your primary residence for at least two of the previous five years leading up to the sale. Additionally, any profits from the sale of a second home or investment property will be subject to capital gains taxes. These taxes are calculated based on the difference between the purchase price and the sale price of the property, minus any applicable deductions and expenses. The capital gains tax rate will depend on your income level and the length of time you held the property before selling it. It is always best to consult with a tax professional for specific advice on your individual situation.

Learn more about capital gains: https://brainly.com/question/9144560

#SPJ11

If any, tort could this be classified as assault. The answer is OPTION E.

When one person makes another feel threatened or uncertain about an impending, hostile physical contact, that is considered an assault. Battery is the actual act of inflicting physical injury, whereas assault is the act that makes the plaintiff fear receiving physical harm.

For instance, the plaintiff would have been assaulted if the tortfeasor had made threats to stab her. The wrongdoing of making another person legitimately fear immediate violence is referred to as assault. This implies that the object of the dread must be one that a sane person would perceive as dangerous to them. The wrongdoing of physically injuring another person is referred to as battery. The answer is OPTION E.

To learn more about assault, click here.

https://brainly.com/question/30228356

#SPJ4

The begin and end dates, may be less than 2 (two) months but never greater than 6 (six) months.

The begin and end dates for a project or timeline may vary depending on the specific context, but they should always be appropriate for the scope of the project. Generally speaking, the duration of a project can be less than a month or more than a year, depending on its complexity, resources, and objectives. However, there are some limits to how short or long a project can be, depending on the nature of the work and the available resources.

In general, a project should be at least one week long to allow for adequate planning and execution, and no longer than three years to ensure that the project remains relevant and manageable. However, these are only general guidelines, and the actual duration of a project will depend on the specific needs and constraints of the project team and Project management.

To learn more about Project management click here

brainly.com/question/29564005

#SPJ11

To find the price of the stock in five years (P5), we can use the Dividend Discount Model (DDM) formula, which is:

P5 = D1 / (required return - growth rate)

First, we need to calculate the dividend payment in year 5 (D5). Since the dividend just paid is $2.20 and the growth rate is 4%, we can find D5 using the formula:

D5 = D0 * (1 + growth rate)^5

D5 = 2.20 * (1 + 0.04)^5
D5 = 2.20 * (1.216653)
D5 ≈ $2.67664

Now, we can use the DDM formula to find the price of the stock in five years (P5):

P5 = D5 / (required return - growth rate)
P5 = 2.67664 / (0.12 - 0.04)
P5 = 2.67664 / 0.08
P5 ≈ $33.45

The price of the stock in five years is closest to option b) $32.70.

Dividend Discount Model- The Dividend Discount Model (DDM) is a method of valuing a company's stock based on the present value of its future dividends. The DDM assumes that a stock's intrinsic value is equal to the present value of its expected future dividends, discounted at an appropriate rate.

Know more about Dividend Discount Model here:

https://brainly.com/question/15565934

#SPJ11

Roth and his company should collaborate with the USDA, state governors, and other relevant officials to create a comprehensive plan that promotes fair treatment. Here are the steps each party should take:

1. Roth and his company: They should review their current policies and practices to identify areas where fair treatment may be lacking. Once identified, they should make necessary changes to promote inclusivity and equal opportunity for all employees and stakeholders.
2. USDA: The USDA should set up guidelines and standards for companies like Roths to follow in order to ensure fair treatment. This may include developing and implementing regulations that prevent discrimination and promote equal opportunity in areas such as hiring, promotions, and access to resources.
3. State governors: State governors should work with their respective legislatures to pass laws that support fair treatment in businesses within their states. They should also allocate resources to enforce these laws and penalize companies that do not adhere to the established guidelines.
4. Other officials: Relevant officials, such as labor department representatives, should collaborate with the USDA and state governments to monitor companies and ensure compliance with fair treatment regulations. They can also provide training and resources for businesses to improve their practices.
By working together, Roth and his company, the USDA, state governors, and other officials can create a more equitable environment that ensures fair treatment for all.

To know more about USDA

https://brainly.com/question/16996234

#SPJ11

The entry records the amount of the purchase orders and contracts issued by the City of Jackson Hole for various departments and programs, including general government, public safety, public works, health and welfare, and miscellaneous expenses.

Debit:
General government expenditures - $50,000
Public safety expenditures - $200,000
Public works expenditures - $75,000
Health and welfare expenditures - $65,000
Miscellaneous expenditures - $5,000
Credit:
Accounts payable - $395,000

The credit to accounts payable represents the liability the city owes to its vendors and suppliers for these purchases. The summary general journal entry to record the issuance of the purchase orders and contracts for the City of Jackson Hole during the first month of its fiscal year is as follows.
Hi! To record the issuance of the purchase orders and contracts for the City of Jackson Hole during the first month of its fiscal year, you would make a summary general journal entry as follows:
Date | Account Title | Debit | Credit
-----|----------------|-------|-------
MM/DD | Purchase Orders & Contracts - General Government | $50,000 |
MM/DD | Purchase Orders & Contracts - Public Safety | $200,000 |
MM/DD | Purchase Orders & Contracts - Public Works | $75,000 |
MM/DD | Purchase Orders & Contracts - Health & Welfare | $65,000 |
MM/DD | Purchase Orders & Contracts - Miscellaneous | $5,000 |
-----|----------------|-------|-------
MM/DD | Encumbrances | | $395,000.

This journal entry shows the issuance of purchase orders and contracts for each category and the total amount encumbered for all categories.

To know more about Government click here .

brainly.com/question/16940043

#SPJ11

The Federal Reserve (Fed) uses its policy tools to influence the interest rate and regulate the amount of money circulating in the United States by adjusting the reserves of the banking system. The three main policy tools used by the Fed are:

1. Open Market Operations: When the Fed buys securities in the open market, the monetary base increases, and the interest rate falls. When the Fed sells securities, the monetary base decreases, and the interest rate rises.

2. Discount Rate: By lowering the interest rate, the Fed makes it less costly for banks to borrow, thus regulating the amount of money circulating in the United States. When the Fed raises the interest rate, it becomes more costly for banks to borrow, which reduces the money supply.

3. Reserve Requirements: By increasing the required reserve ratio, the Fed forces banks to hold a larger proportion of their deposits, which decreases the amount of money available for lending and reduces the money supply. When the Fed lowers the reserve requirement, banks can lend more money, which increases the money supply.

These tools help the Fed to achieve its goals of stable prices, maximum employment, and moderate long-term interest rates, ensuring a stable and growing economy.

To know more about Federal Reserve refer here

brainly.com/question/23247429#

#SPJ11

The contribution per unit is $51. The contribution margin ratio is 60%. The break-even point in units is 2,600 units.

(1) The contribution per unit is calculated by subtracting the variable cost per unit from the selling price per unit:

Contribution per unit = Selling price per unit - Variable cost per unit
Contribution per unit = $85 - $34
Contribution per unit = $51

(2) The contribution margin ratio is the percentage of each sale that contributes to covering the fixed costs and generating profits. It is calculated by dividing the contribution per unit by the selling price per unit:

Contribution margin ratio = (Contribution per unit / Selling price per unit) x 100%
Contribution margin ratio = ($51 / $85) x 100%
Contribution margin ratio = 60%

(3) The break-even point in units is the number of units that need to be sold to cover the total fixed costs and variable costs and generate zero profits. It can be calculated as follows:

Break-even point in units = Total fixed costs / Contribution per unit
Break-even point in units = $132,600 / $51
Break-even point in units = 2,600 units

Therefore, Viva needs to sell 2,600 units to break even, which means that any sales above this point will generate profits.

Learn more about the Contribution margin ratio: https://brainly.com/question/24039258

#SPJ11

The inventory reorder point is 5000 units, as we need to consider the lead time and the usage rate of materials. In this case, we have a 365-day production period and a 4-day delivery period.

First, we need to calculate the usage rate of materials per day. To do this, we divide the total units of material needed (365,000) by the production period (365 days).

Usage rate = 365,000 / 365 = 1000 units per day

Next, we need to calculate the lead time demand, which is the amount of material needed during the delivery period. To do this, we multiply the usage rate by the delivery period.

Lead time demand = 1000 x 4 = 4000 units

Finally, we can calculate the inventory reorder point by adding the lead time demand to the safety stock level. The safety stock level is the amount of inventory that a company keeps on hand to account for unexpected demand or delays in delivery.

Assuming a safety stock level of 1000 units:

Reorder point = Lead time demand + safety stock level
Reorder point = 4000 + 1000
Reorder point = 5000 units

Therefore, the inventory reorder point is 5000 units. This means that the company should place an order for more material when the inventory level reaches 5000 units to ensure that they have enough material on hand to meet production needs during the 4-day delivery period.

Learn more about inventory here:

https://brainly.com/question/28916857

#SPJ11

There are several ways to allocate support department costs, and the most appropriate method may depend on the nature of the business, the available data, and the objectives of the analysis. In this case, the new controller has requested three alternative methods to allocate the support costs more accurately.

Method 1: Direct Method

The direct method allocates support department costs directly to the operating departments based on their usage of the services. In this case, the direct method allocates each support department's cost to the operating departments in proportion to their usage. The direct method is the simplest and most straightforward, as it directly assigns costs to the departments that use them. Using this method, the allocation of support costs is as follows:

Method 1: Direct Method

Method 2: Step-Down Method

The step-down method allocates support department costs to each other and then to the operating departments. In this method, support departments are ranked in order of importance, and costs are allocated in a step-by-step process, starting with the most important department. The idea is that a department that supports other departments should first allocate its costs to those departments before allocating its costs to other departments. Using this method, the allocation of support costs is as follows:

Method 2: Step-Down Method

Method 3: Reciprocal Method

The reciprocal method allocates support department costs based on the mutual services provided among support departments and operating departments. In this method, each support department's costs are allocated to other departments based on the amount of service provided, and costs are then reciprocated between departments. This method recognizes that support departments provide services to each other, and these services should be taken into account when allocating costs. Using this method, the allocation of support costs is as follows:

Method 3: Reciprocal Method

Each method has its advantages and disadvantages, and the choice of method may depend on the specific needs and characteristics of the company. However, using different allocation methods can provide a more accurate picture of costs, allowing managers to make better-informed decisions.

For more such questions on department

https://brainly.com/question/30199506

#SPJ11

The answer is c. Forbearance. Forbearance refers to a situation in which a firm chooses not to react to a competitor's actions, even though it has the ability to do so.

This may occur when the cost of a competitive reaction is higher than the potential benefits, or when the firm believes that retaliation could lead to a damaging price war or other negative outcomes.

In some cases, forbearance may be used as a strategic tool to signal to competitors that the firm is not interested in engaging in a costly and potentially harmful competitive battle.

Co-opetition refers to a situation in which firms collaborate with each other in some areas while competing in others, often with the goal of creating mutually beneficial outcomes.

The answer is c. Forbearance.

To learn more about “Forbearance” refer to the https://brainly.com/question/30486293

#SPJ11

The reason for the characterization of "Guyland" by gender inequality and the desire to prove masculinity, as stated by Michael Kimmel, is due to several factors.

One factor is that men derive their sense of identity from their work, and jobs in the services economy are often seen as less masculine than those in the manufacturing economy, especially low-wage jobs. This leads to what Kimmel calls "emotional downsizing" for men.

In addition, in the services economy, men often seek to experience their masculinity through "consuming" masculinity and masculine products. This can also lead to "emotional downsizing" as images and advertisements often seek to make men feel insufficient.

Finally, the entrance of women into traditionally male professional and social spaces is seen as threatening to men's traditional feelings of masculinity. Overall, the combination of these factors leads to the characterization of Guyland as a space where gender inequality and the desire to prove masculinity are prevalent.

To know more about gender inequality click on below link:

https://brainly.com/question/1087314#

#SPJ11

False. The strategy of minimizing errors by using statistical sampling to locate errors is known as statistical process control, not synergy.

Synergy refers to the combined effort of multiple individuals or groups to achieve a common goal. It is not related to statistical process control or the strategy of minimizing errors in manufacturing through statistical sampling.

The strategy described in your question is not called synergy. It is known as statistical quality control or sampling inspection. This method involves testing a sample of items from a production run to estimate the overall quality of the entire production batch, rather than inspecting every single item. This helps in minimizing errors and reducing the time and cost associated with quality control.

To Know more about statistical process

https://brainly.com/question/5391767

#SPJ11

The term "monetary policy" refers to the actions undertaken by a central bank, such as the Federal Reserve, to influence the availability and cost of money and credit to help promote national economic goals. The Federal Reserve Act of 1913 gave the Federal Reserve responsibility for setting monetary policy.The Federal Reserve controls the three tools of monetary policy--open market operations, the discount rate, and reserve requirements. The Board of Governors of the Federal Reserve System is responsible for the discount rate and reserve requirements, and the Federal Open Market Committee is responsible for open market operations. Using the three tools,depository institutions the Federal Reserve influences the demand for, and supply of, balances that depository institutions hold at Federal Reserve Banks and in this way alters the federal funds rate. The federal funds rate is the interest rate at which  lend balances at the Federal Reserve to other depository institutions overnight.

What is the structure of the FOMC?

The Federal Open Market Committee (FOMC) consists of twelve members--the seven members of the Board of Governors of the Federal Reserve System; the president of the Federal Reserve Bank of New York; and four of the remaining eleven Reserve Bank presidents, who serve one-year terms on a rotating basis. The rotating seats are filled from the following four groups of Banks, one Bank president from each group: Boston, Philadelphia, and Richmond; Cleveland and Chicago; Atlanta, St. Louis, and Dallas; and Minneapolis, Kansas City, and San Francisco. Nonvoting Reserve Bank presidents attend the meetings of the Committee, participate in the discussions, and contribute to the Committee's assessment of the economy and policy options.The FOMC holds eight regularly scheduled meetings per year. At these meetings, the Committee reviews economic and financial conditions, determines the appropriate stance of monetary policy, and assesses the risks to its long-run goals of price stability and sustainable economic growth.Changes in the federal funds rate trigger a chain of events that affect other short-term interest rates, foreign exchange rates, long-term interest rates, the amount of money and credit, and, ultimately, a range of economic variables, including employment, output, and prices of goods and services. If the Federal Open Market Committee (FOMC) wants to lower the short-term interest rate, it can buy the U.S. Treasury securities from a commercial bank. So, the correct option is (a) lower; buy.

to know more about the federal open market company:

https://brainly.com/question/792817

#SPJ11

The speaker uses a combination of professional experience, personal connection to the topic, and supporting evidence to establish her credibility and build trust with the audience.

For more such question on professional experience

https://brainly.com/question/14640198

#SPJ11

The speaker uses a combination of professional experience, personal connection to the topic, and supporting evidence to establish her credibility and build trust with the audience.

For more such question on professional experience

https://brainly.com/question/14640198

#SPJ11

The correct answer is c. The fact that a monopolistically competitive firm does not produce at the minimum ATC can be viewed as the cost of generating product differentiation and variety.

In order to differentiate their product and make it more appealing to consumers, firms may need to invest in marketing, research and development, and other activities that increase their costs. This can make it difficult for them to achieve the economies of scale necessary to produce at the minimum ATC. Additionally, because products are not homogeneous in monopolistically competitive markets, firms may have more pricing power and be able to charge a premium for their differentiated products.

In a monopolistically competitive market, firms differentiate their products to attract consumers, and this differentiation leads to variety in the market. However, it also results in the firm not being able to produce at the minimum ATC as it focuses on product uniqueness instead of achieving economies of scale.

To know more about competitive firm visit:

https://brainly.com/question/17241373

#SPJ11

Answer: tu papi

Explanation: there is none be smarter

The correct answer is d. factoring. Factoring involves selling accounts receivable to a third party (a factor) at a discount in exchange for immediate cash.

This allows businesses to raise funds quickly without taking on additional debt or using collateral.The sale or transfer of accounts receivable to raise funds is called d. factoring. Factoring involves a business selling its accounts receivable to a third party, called a factor, at a discount. This allows the business to receive immediate cash, while the factor takes on the responsibility of collecting the receivables.

To know more about Discounting

https://brainly.com/question/31430480

#SPJ11

The marginal product (MP) of labor and capital can be found by taking the partial derivative of the production function with respect to each input: f L = 50 L^(-0.5) K^(0.5)

f K = 50 L^(0.5) K^(-0.5)

To show that there are diminishing marginal productivities, we need to take the second partial derivatives of the production function with respect to each input:

f LL = -25 L^(-1.5) K^(0.5) < 0 (since L and K are both positive)

f KK = -25 L^(0.5) K^(-1.5) < 0 (since L and K are both positive)

Therefore, the marginal productivity of labor and capital is diminishing.

The cost function can be found by multiplying the inputs by their respective prices and adding them together:

C = wL + rK

= 5L + 4K

        π = PQ - C

         = (1)(100 L^0.5 K^0.5) - (5L + 4K)

         = 100 L^0.5 K^0.5 - 5L - 4K

       ∂π/∂L = 50 L^(-0.5) K^0.5 - 5 = 0

        L^(-0.5) K^0.5 = 1/10

∂π/∂K = 50 L^0.5 K^(-0.5) - 4 = 0

L^0.5 K^(-0.5) = 2/25

Solving these two equations simultaneously gives:

L = 20, K = 80

Therefore, the firm should hire 20 units of labor and 80 units of capital to maximize profits.

To learn more about “labor” refer to the https://brainly.com/question/333305

#SPJ11