The velocity potential for an Incompressible unliform flow parallel to the x-axis was given In class. Which of the following is the velocity potential for a uniform flow at an angle of attack a? φ(r,y)=Lycosa-rsina) cos α cos

The maximum deflection of the beam is 1.317 cm at the point x is 0.3989L.

We obtain the following by taking the derivative of the preceding equation with respect to x:

dy/dx = 10L/EI (-1 + 6x/L - 4x³/L³)

By setting this to zero and figuring out x, we obtain:

-1 + 6x/L - 4x³/L³ = 0

4x³ - 6Lx + L² = 0

Using the value of xr, we can then substitute it back into the original equation to find the maximum deflection:

ymax = 10L*3 / (3E*I) * (xr - xr4 / L3)

Plugging in the given values, we get:

ymax = 1.317 cm

Deflection is a term used in engineering and physics to describe the bending or deformation of a material or structure under an applied load. When a load is applied to a material or structure, it can cause it to deflect or bend in a specific direction. The amount of deflection is determined by several factors, including the type and properties of the material, the size and shape of the structure, and the magnitude and direction of the load.

Deflection can have a significant impact on the performance and stability of a structure, especially in situations where precision and accuracy are critical. Deflection is a common phenomenon in many engineering applications, including bridges, buildings, and mechanical components. Engineers must carefully consider deflection when designing and analyzing structures to ensure that they are safe and reliable.

To learn more about Deflection visit here:

brainly.com/question/22953155

#SPJ4

Complete Question:-

A uniform beam is subjected to a linearly increasing distributed load. The equation for the resulting elastic curve is y = 10LT (-X° + 2L?x’ – L4x) (P5.15) Use the bisect function (given) to determine the point of maximum deflection (i.e., the value of x where dy/dx = 0). Then substitute this value into Eq. P5.15 to determine the value of the maximum deflection. Use the following parameter values in your computation: L = 600 cm, E = 50,000 kN/cm^21,1 = 30,000 cm^4 , and w0 = 2.5 kN/cm. Use xr as the name of the root that is output by the bisect function. Use ymax for the value of the maximum deflection. Use a stopping criterion of 0.00005. You should also plot the function to make sure that your initial guesses properly bracket the root.

The jump height of the 61.5 kg pole vaulter running at 11.2 m/s with a horizontal component of velocity of 1.0 m/s is 3.13 m.

To find the height, we first determine the vertical component of velocity. Using Pythagorean theorem:

Initial vertical velocity (v_y) = √(v² - v_x²) = √(11.2² - 1.0²) = √(125.44 - 1) = √124.44 = 11.15 m/s

Next, we use the conservation of mechanical energy to find the maximum height. Since air resistance is disregarded, potential energy (PE) at maximum height equals initial kinetic energy (KE).

PE = KE → m * g * h = 0.5 * m * v_y²
Solving for height (h):

h = (0.5 * v_y²) / g
h = (0.5 * 11.15²) / 9.81
h = 3.13 m

To know more about Pythagorean theorem click on below link:

https://brainly.com/question/14930619#

#SPJ11

The coefficient of rolling friction μr for the second tire inflated to 105 psi is approximately 0.108.

We can use the relationship between the distance traveled and the initial speed of the tire to find the coefficient of rolling friction μr for the second tire:

d = (v0^2/2μr) + (v0^2/2g)

where d is the distance traveled before the speed is reduced by half, v0 is the initial speed, μr is the coefficient of rolling friction, and g is the acceleration due to gravity.

For the first tire inflated to 40 psi, we have:

d1 = (3.10^2/2μr) + (3.10^2/2g)

18.3 = (9.61/μr) + 4.95

14.35 = 9.61/μr

μr = 9.61/14.35 = 0.669

For the second tire inflated to 105 psi, we have:

d2 = (3.10^2/2μr) + (3.10^2/2g)

94.0 = (9.61/μr) + 4.95

89.05 = 9.61/μr

μr = 9.61/89.05 = 0.108

Therefore, the coefficient of rolling friction μr for the second tire inflated to 105 psi is approximately 0.108.

Visit to know more about Friction:-

brainly.com/question/24338873

#SPJ11

a. Therefore, the current carried by the wire is 13.0 A.

b. Therefore, the resistance of a 6.3 m length of the same wire is 2.63 Ω.

c. Therefore, the potential difference between the two points in the wire 6.3 m apart is 3.46 V.

(a) The electric field in the wire and its diameter can be used to calculate the current using Ohm's law, where the current is given by I = A * J, where A is the cross-sectional area of the wire and J is the current density. The current density is given by J = E / ρ, where ρ is the resistivity of the wire.

The cross-sectional area of the wire is given by A = πr^2, where r is the radius of the wire, which is half of its diameter. Thus, r = 0.43 mm = 0.43 × [tex]10^{-3} m. \\A = pi * 0.43 * 10^{-3} m)^2 = 5.80 * 10^{-7} m^2.[/tex]

Using the given values, J = E / ρ = 0.55 V/m / (2.44 × 10^-8 Ω·m) = 2.25 × 10^7 A/m^2.

Therefore, I = A * J = ([tex]5.80 * 10^{-7} m^2) * (2.25 * 10^7 A/m^2)[/tex] = 13.0 A.

(b) The potential difference between two points in the wire can be calculated using the electric field and the distance between the two points. The potential difference is given by ΔV = Ed, where d is the distance between the two points.

Thus, ΔV = (0.55 V/m) * (6.3 m) = 3.46 V.

(c) The resistance of a 6.3 m length of the same wire can be calculated using the resistivity of the wire and the length and cross-sectional area of the wire. The resistance is given by R = ρL / A.

Thus, R =[tex](2.44 * 10^{-8} ) * (6.3 m) / (5.80 * 10^{-7} m^2)[/tex]

= 2.63 Ω.

Learn more about current-carrying visit: brainly.com/question/1873362

#SPJ4

The flux at t = 0.25 s is greater than at t = 0.55 s.

Magnetic flux φ = 7 Wb

The flux at t = 0.25 s is greater than at t = 0.55 s. But the two emf values are same, becuase at those times the flux is changing at same rate.

Slope of flux between 0.2 s and 0.6 s

ε  = dφ/dt

= ( -7 - 15 ) Wb  / ( 0.6 - 0.2 ) s

= - 55 V

In this scenario, the magnetic flux remains constant at 7 Wb. Therefore, the induced emf at both times (t=0.25 s and t=0.55 s) is the same because the rate of change of flux is constant. So, the only difference between the two times is the magnitude of the flux. Since the flux is constant, the induced emf is also constant, and the flux at t=0.25 s is greater than, less than, or the same as the flux at t=0.55 s.

To know more about magnetic flux, here

brainly.com/question/30858765

#SPJ4

--The complete question is, e magnetic flux through a single loop coil is given by the figure below, where Φ0 = 7 Wb.

Is the magnetic flux at t = 0.25 s greater than, less than, or the same as the magnetic flux at t = 0.55 s?--

(a) The average cost of operating an electric water heater for a 30-day month at $0.15/kWh is $9.00. (b) The resistance of a typical water heater is about 12-24 ohms.

(a) To calculate the cost of operating the heater for a 30-day month, first find the total operating hours (2 hours/day * 30 days = 60 hours). Then, multiply the total hours by the cost per kWh ($0.15) to get the total cost (60 hours * $0.15 = $9.00).

(b) The resistance of a typical water heater can be found in Table 17.2. According to the table, the resistance ranges from 12-24 ohms, depending on the specific water heater model and its power rating.

To know more about power rating click on below link:

https://brainly.com/question/16914041#

#SPJ11

(a) In equilibrium, the volume of each subsystem will be proportional to their number of particles. VA = V * (NA / (NA + NB)) and VB = V * (NB / (NA + NB)).

(b) In thermal equilibrium, the average distribution of energy is such that dSA/dEA = dSB/dEB. Solving this equation, you can find the equilibrium energy distribution for subsystems A and B.

=

(a) When two subsystems reach equilibrium, the total volume is distributed according to the number of particles in each subsystem. The ratios of particles in each subsystem to the total particles are used to determine the equilibrium volumes.

(b) To find the average distribution of energy in thermal equilibrium, we use the condition dSA/dEA = dSB/dEB. This equation represents the conservation of energy between the two subsystems when they exchange energy. By solving this equation, we can determine the equilibrium energy distribution for both subsystems.

To know more about thermal equilibrium click on below link:

https://brainly.com/question/29419074#

#SPJ11

The correct prescription for the eyeglasses is +2.75 diopters.

The man's near point without correction is 1/0.275 m = 3.64 diopters. With the contact lenses, his near point is at 1/2.05 + 0.020 = 0.97 m or 1.03 diopters. The difference between the two values, which represents the additional correction needed for the eyeglasses, is 3.64 - 1.03 = 2.61 diopters.

However, since the eyeglasses are 0.020 m from his eyes, the additional power required to compensate for this distance is 1/0.020 = 50 diopters. Adding this to the 2.61 diopters gives a total of 52.61 diopters.

Since the man is farsighted, the prescription must be positive, and therefore rounded up to the nearest quarter diopter, which gives a final prescription of +2.75 diopters.

To know more about contact lenses click on below link:

https://brainly.com/question/10921004#

#SPJ11

Answer:

Explanation:

v^2 = u^2 + 2as

where v is the final velocity (80 m/s), u is the initial velocity (0 m/s), a is the acceleration, and s is the distance traveled (1400 m).

Rearranging the equation to solve for acceleration, we get:

a = (v^2 - u^2) / (2s)

Substituting the given values, we get:

a = (80^2 - 0^2) / (2 x 1400) = 2.29 m/s^2

Therefore, the acceleration of the plane is 2.29 m/s^2.

To find the time it took for the plane to reach 80 m/s, we can use the following kinematic equation:

v = u + at

where t is the time taken. Rearranging the equation, we get:

t = (v - u) / a

Substituting the given values, we get:

t = (80 - 0) / 2.29 = 34.98 seconds (rounded to two decimal places)

Therefore, it took the plane approximately 34.98 seconds to reach a speed of 80 m/s, assuming constant acceleration.

The acceleration is approximately 0.457 m/s^2, and the time required to reach 80 m/s is approximately 175 seconds.

To determine the acceleration and time, we'll use the following equation:

speed = initial speed + acceleration × time

Since the plane starts from rest, its initial speed is 0 m/s. We are given the final speed (80 m/s) and the distance required to reach that speed (1400 m). To find acceleration, we can use the equation:

distance = initial speed × time + 0.5 × acceleration × time^2

Plugging in the values:

1400 m = 0 m/s × time + 0.5 × acceleration × time^2

Since initial speed is 0, the equation simplifies to:

1400 m = 0.5 × acceleration × time^2

Now, we need to express time in terms of acceleration. We can rearrange the speed equation:

time = (speed - initial speed) / acceleration

Plugging this expression for time into the distance equation:

1400 m = 0.5 × acceleration × ((80 m/s) / acceleration)^2

Solving for acceleration, we get:

acceleration ≈ 0.457 m/s^2

Now, we can find the time using the time equation:

time = (80 m/s) / (0.457 m/s^2)

time ≈ 175 s

So, the acceleration is approximately 0.457 m/s^2, and the time required to reach 80 m/s is approximately 175 seconds.

To know more about acceleration click here:

https://brainly.com/question/30660316

#SPJ11

The values for n1 and n2 may now be replaced as follows: sini=12.42 i=sin1(12.42) i=24.4 degrees Therefore, 24.4 degrees is the angle that the ray may form with the normal without being completely into the diamond.

A Diamond's refractive index is 2.42, which implies that compared to the speed of light in the air, it will slow down in a diamond by a factor of 2.42. In other words, the speed of light in a diamond is 1/2.42 that of a vacuum.

In order to prevent entire internal reflection from occurring, we saw that the greatest angle it may form with the normal is 90°, and we can now calculate this angle. I, who goes by the name of the critical angle.

to know more about the index of refraction here:

brainly.com/question/23750645

#SPJ1

The capacitance of the parallel plate capacitor is 6.64 x 10^-8 farads.

the parallel plate capacitor holds a charge of 5.98 x 10^-7 coulombs when 9.00 volts is applied to it.

(a) The capacitance of a parallel plate capacitor is given by:

C = ε₀A/d

where C is the capacitance in farads (F), ε₀ is the permittivity of free space (8.85 x 10^-12 F/m), A is the area of the plates in square meters (m^2), and d is the distance between the plates in meters (m).

In this case, A = 1.5 m^2 and d = 0.02 mm = 0.02 x 10^-3 m = 2 x 10^-5 m (since 1 mm = 10^-3 m). The permittivity of neoprene rubber is given as κ = 6.7, which is the dielectric constant of the material.

Using the formula for capacitance, we get:

C = ε₀A/d = (8.85 x 10^-12 F/m)(1.5 m^2)/(2 x 10^-5 m)
C = 6.64 x 10^-8 F

Therefore, the capacitance of the parallel plate capacitor is 6.64 x 10^-8 farads.

(b) The charge Q on a capacitor is related to the capacitance C and the voltage V applied to it by the formula:

Q = CV

where Q is the charge in coulombs (C), C is the capacitance in farads (F), and V is the voltage in volts (V).

In this case, we know the capacitance C and the voltage V, so we can calculate the charge Q:

Q = CV = (6.64 x 10^-8 F)(9.00 V)
Q = 5.98 x 10^-7 C

Therefore, the parallel plate capacitor holds a charge of 5.98 x 10^-7 coulombs when 9.00 volts is applied to it.

Visit to know more about Capacitor:-

brainly.com/question/21851402

#SPJ11

The sample from the bottom has more of the substance than the sample from the top, is because of the heterogeneous mixture.

The mixture is a combination of two or more substances dispersed in one another and it retains its original property. The mixture is of two types and they are a homogenous and heterogeneous mixture.

A heterogeneous mixture is a mixture of two or more substances that are dissimilar structures and they are unevenly distributed in the mixture. It is a mixture with non-uniform composition and the molecules can be separated into their constituents by filtering or magnetic separation etc.  

Hence, from the observation, Kathleen observed uneven distribution of the mixture. Thus, the sample is a heterogeneous mixture.

To learn more about the mixture and its types:

https://brainly.com/question/4703696

#SPJ1

The magnetic field inside the solenoid near the center is approximately 10 mT.

To calculate the magnetic field inside the solenoid near the center, we can use the formula:
B = μ₀ * n * I
where B is the magnetic field, μ₀ is the permeability of free space (4π x 10^-7 T*m/A), n is the number of turns per unit length (in this case, n = N/L = 470 turns/0.14 m = 3357 turns/m), and I is the current.
Plugging in the values, we get:
B = (4π x 10^-7 T*m/A) * (3357 turns/m) * (2.4 A)
B = 0.010 T or 10 mT (rounded to two significant figures)

To learn more about Magnetic Field inside a Solenoid : https://brainly.com/question/13200775

#SPJ11

In order to rank the speeds of the three balls in the figure, we need to consider the laws of physics that govern their motion. Since all three balls have the same mass and are fired from the same height above the ground, their potential energy is the same. This means that the only factor that determines their speeds is the conversion of potential energy to kinetic energy as they fall towards the ground.

According to the law of conservation of energy, the total amount of energy in the system must remain constant. Therefore, the sum of the potential and kinetic energies of each ball must be equal at all times. This can be expressed mathematically as:

Potential energy + Kinetic energy = Constant

Since the potential energy is the same for all three balls, the only way for their kinetic energies to be different is if they experience different amounts of air resistance or drag during their fall. However, since we are assuming that all three balls are fired with equal speeds, we can assume that they experience the same amount of air resistance and drag.

Therefore, we can conclude that the speeds of the three balls as they hit the ground are equal, and they should be ranked as equivalent. This means that va, vb, and vc should be overlapped in the ranking order

to know more about conservation of energy click this link -

brainly.com/question/13949051

#SPJ11

The minimum power output used by the athlete to climb up the rope was approximately 338.68 Watts.

To calculate the minimum power output used by the athlete to climb up the rope, we can use the formula:
Power = Work / Time
We know the work done by the athlete, which is the gravitational potential energy gained by climbing up the rope:
Work = mgh
where m = 62 kg (mass of the athlete), g = 9.81 m/s^2 (acceleration due to gravity), and h = 5.0 m (vertical distance climbed)

Work = (62 kg)(9.81 m/s^2)(5.0 m) = 3048.1 J. We also know the time taken to do this work, which is 9.0 s.
Now we can substitute these values into the power formula:
Power = Work / Time = 3048.1 J / 9.0 s = 338.68 W

To learn more about Minimum Power Output : https://brainly.com/question/14170081

#SPJ11

The mathematical relationship is drag force = k*A

The drag force on an object is influenced by several factors, including its size, shape, velocity, and the properties of the fluid it is moving through. However, in general, the drag force is proportional to the size of the object. This is because a larger object will displace more fluid, resulting in a greater force exerted on the object by the fluid.

Mathematically, we can express this relationship as:

F_drag = k * A

where,

F_drag is the drag force

A is the cross-sectional area of the object perpendicular to its direction of motion

k is a constant of proportionality that depends on the properties of the fluid and the velocity of the object.

In this equation, we see that the drag force is directly proportional to the cross-sectional area of the object, which is a measure of its size. This means that as the size of the object increases, the drag force will also increase proportionally.

learn more about drag force,

https://brainly.com/question/27817330

#SPJ11

The polarizing filter only allows light waves that are aligned with its axis to pass through, and since the laser beam is vertically polarized, only a component of its power will be transmitted through the filter.

The power of the laser beam after passing through the polarizing filter can be calculated using Malus' law:

P2 = P1 cos²θ

where P1 is the initial power of the laser beam, θ is the angle between the polarizing filter axis and the direction of polarization of the laser beam, and P2 is the power of the laser beam after passing through the filter.

Using the equation P2 = P1 cos²θ,

where P1 is the initial power (250 mW)

and θ is  33°,

we can calculate the power transmitted through the filter as

P2 = 250 mW cos²33° ≈ 200 mW.

Therefore, the power of the laser beam as it emerges from the filter is approximately 200 mW.

Learn more about polarization here:

https://brainly.com/question/31416311

#SPJ11

The change in the potential energy of a -12.9 µC charge moving from the origin to the point (x, y) = (19.3 cm, 46.4 cm) in a uniform electric field of magnitude 236 V/m directed in the negative x direction is 0.00060507 Joules.

To determine the change in the potential energy of a -12.9 µC charge moving from the origin to the point (x, y) = (19.3 cm, 46.4 cm) in a uniform electric field of magnitude 236 V/m directed in the negative x direction can be calculated using the formula:

ΔPE = -q × E × Δx

Where ΔPE is the change in potential energy, q is the charge, E is the electric field magnitude, and Δx is the distance moved in the x direction.

First, convert the distance to meters: Δx = 19.3 cm × (1 m / 100 cm)

= 0.193 m

Now, substitute the values into the formula:

ΔPE = -(-12.9 × 10⁻⁶ C) × (236 V/m) × (0.193 m)

ΔPE ≈ 0.00060507 J

So, the change in the potential energy of the charge is approximately 0.00060507 Joules.

Learn more about potential energy: https://brainly.com/question/30890461

#SPJ11

Answer: The velocity of the second ball after the collision is -2 m/s due east.

Explanation:

We can use the law of conservation of momentum to solve this problem. According to this law, the total momentum of a system before a collision is equal to the total momentum of the system after the collision, provided that no external forces act on the system.

The momentum p of an object is given by the product of its mass m and velocity v: p = mv.

Before the collision, the momentum of the system is:

p_initial = m_1 * v_1 + m_2 * v_2

where m_1 and v_1 are the mass and velocity of the first ball, m_2 and v_2 are the mass and velocity of the second ball.

Plugging in the given values, we get:

p_initial = (0.50 kg)(6.0 m/s) + (1.00 kg)(-12.0 m/s) = -6.0 kg*m/s

After the collision, the momentum of the system is:

p_final = m_1 * v'_1 + m_2 * v'_2

where v'_1 and v'_2 are the velocities of the first and second ball after the collision.

We are given that the first ball moves away at -14 m/s after the collision, so:

v'_1 = -14 m/s

We can now use the conservation of momentum to solve for v'_2:

p_initial = p_final

m_1 * v_1 + m_2 * v_2 = m_1 * v'_1 + m_2 * v'_2

Plugging in the given values, we get:

(0.50 kg)(6.0 m/s) + (1.00 kg)(-12.0 m/s) = (0.50 kg)(-14 m/s) + (1.00 kg)(v'_2)

Solving for v'_2, we get:

v'_2 = -2 m/s

Therefore, the velocity of the second ball after the collision is -2 m/s due east.

The equation for the market demand curve for leather jackets can be represented as

                             [tex]Qd = a - bP + cI + dT + eS[/tex]

where I is consumer income, T is tastes and preferences, and S is the availability of substitutes. The coefficients c, d, and e measure the responsiveness of demand to changes in income, tastes, preferences, and availability of substitutes, respectively.

The equation for the market demand curve for leather jackets depends on the variables that affect the demand for these products, such as the price of leather jackets, consumer income, tastes and preferences, availability of substitutes, etc. In general, the demand curve can be expressed as a linear relationship between the quantity demanded and the price of the jackets, holding all other variables constant.

The general equation for a linear demand curve is:

                      [tex]Qd = a - bP[/tex]

where Qd is the quantity demanded, P is the price, and a and b are constants that determine the intercept and slope of the demand curve, respectively. Intercept a represents the quantity demanded when the price is zero, and slope b represents the change in quantity demanded per unit change in price.

For the market demand curve for leather jackets, the equation can be modified to include other variables that affect demand, such as consumer income, tastes, and preferences, etc. For example, the demand curve might be written as:

                                     Qd = a - bP + cI + dT + eS

where I is consumer income, T is tastes and preferences, and S is availability of substitutes. The coefficients c, d, and e measure the responsiveness of demand to changes in income, tastes and preferences, and availability of substitutes, respectively.

The specific equation for the market demand curve for leather jackets will depend on the data and variables available for the market being studied and can be estimated through econometric analysis or market research.

Learn more about the market demand curve here:

https://brainly.com/question/28789753

#SPJ11

The momentum of the hunter running at 5.55 m/s after missing the elephant is 526.25 kilogram meters per second.

Part (a) The momentum of the elephant can be calculated using the formula:
Momentum = mass x velocity
Pe = 1900 kg x 3.5 m/s = 6650 kg m/s
Therefore, the momentum of the elephant is 6650 kilogram meters per second.
Part (b) The momentum of the tranquilizer dart can be calculated using the same formula:
Momentum = mass x velocity
Pt = 0.045 kg x 230 m/s = 10.35 kg m/s
To find how many times larger the elephant's momentum is compared to the tranquilizer dart's momentum, we can use the ratio:
Pe/Pt = 6650/10.35 = 643.48
Therefore, the elephant's momentum is approximately 643 times larger than the momentum of the tranquilizer dart.
Part (c) The momentum of the hunter can be calculated using the same formula:
Momentum = mass x velocity
Ph = 95 kg x 5.55 m/s = 526.25 kg m/s

Learn more about  momentum here

https://brainly.com/question/30677308

#SPJ11

The magnitude of the dipole moment of a solenoid having 327 turns, a radius of 0.06 m, and a length of 0.06 m carrying a current of 7.80 A is 28.84 A·m².

To find the magnitude of the dipole moment of the solenoid, we can use the formula for the magnetic dipole moment of a solenoid:

Magnetic dipole moment (µ) = Number of turns (N) × Current (I) × Area (A)

First, we have the given values:
- Number of turns (N) = 327 turns
- Current (I) = 7.80 A
- Radius of the solenoid (r) = 0.06 m
- Length of the solenoid (l) = 0.60 m

Next, we'll find the Area (A) of the solenoid using the formula for the area of a circle:
Area (A) = π × r²

A = π × (0.06 m)²
A = 0.0113 m²

Now, we can plug in the values into the formula for magnetic dipole moment:
µ = N × I × A
µ = 327 turns × 7.80 A × 0.0113 m²
µ = 28.84 A·m²

The magnitude of the dipole moment of the solenoid is 28.84 A·m².

Learn more about dipole moment:

https://brainly.com/question/11626115

#SPJ11

the impulse J imparted to sphere B by sphere C is:

J = mB*Δv

J = mB*[VBo - (mBVBi + 2mCVCi - mCVCo) / (mB + mC)]

To find the impulse J imparted to sphere B by sphere C, we need to know the change in momentum of sphere B due to the collision with sphere C. The impulse J is defined as:

J = Δp = mΔv

where Δp is the change in momentum, m is the mass of sphere B, and Δv is the change in velocity of sphere B.

Since we know that the collision is elastic, we can use the conservation of momentum and energy principles:

[tex]mBVBi + mCVCi = mBVBo + mCVCo (1) --[/tex]conservation of momentum

[tex]1/2mBVBi^2 + 1/2mCVCi^2 = 1/2mBVBo^2 + 1/2mCVCo^2 (2) --[/tex]conservation of energy

where VB and VC are the velocities of sphere B and C before and after the collision, respectively, and the subscripts "i" and "o" refer to the initial and final states.

Solving equations (1) and (2) simultaneously for VB and VC, we get:

[tex]VB = (mBVBi + 2mCVCi - mCVCo) / (mB + mC) --[/tex]final velocity of sphere B

[tex]VC = (mCVCo + 2mBVBi - mBVBo) / (mB + mC) --[/tex]final velocity of sphere C

Therefore, the change in velocity of sphere B is:

[tex]Δv = VBo - VB[/tex]

[tex]Δv = VBo - [(mBVBi + 2mCVCi - mCVCo) / (mB + mC)][/tex]

And the impulse J imparted to sphere B by sphere C is:

[tex]J = mB*Δv[/tex]

[tex]J = mB*[VBo - (mBVBi + 2mCVCi - mCVCo) / (mB + mC)][/tex]

This is the magnitude of the impulse J imparted to sphere B by sphere C.

Learn more about momentum

brainly.com/question/30677308

#SPJ11

The maximum current in the circuit at resonance is approximately 0.00474 A (4.74 mA).

To determine the resonance frequency of the circuit, we can use the formula:

f = 1 / (2π√(LC))

where L is the inductance in henries, C is the capacitance in farads, and π is approximately 3.14. Substituting the given values, we get:

f = 1 / (2π√(16mH x 3.6uF))
f ≈ 2.78 kHz

So the resonance frequency of the circuit is approximately 2.78 kHz.

To determine the maximum current in the circuit at resonance, we can use the formula:

Imax = Vo / R

where Vo is the voltage of the AC source and R is the resistance in ohms. Substituting the given values, we get:

Imax = 2V / 422Ω
Imax ≈ 4.74 mA

So the maximum current in the circuit at resonance is approximately 4.74 mA.

Learn more about maximum here:

https://brainly.com/question/30693656

#SPJ11

The energy required to move a 0.1 mc charge from one plate of a 10*10⁻⁶ f capacitor to the other is 15 J. This means that the capacitor has a total charge of 0.1 mc, and therefore each plate has a charge of 0.05 mc.

A capacitor is an electrical component that stores energy in an electric field. It consists of two conducting plates separated by an insulating material called a dielectric. When a voltage is applied across the plates, charges of equal magnitude and opposite sign accumulate on the plates.

The electric field between the plates stores energy and the capacitance, which is the measure of how much electric charge the capacitor can hold, is equal to the ratio of the charge on the plates to the voltage applied.

The charge on the capacitor's plates can be calculated from the capacitance and the voltage applied. In this case, the capacitance is 10*10⁻⁶ f and the energy required to move the charge of 0.1 mc is 15 J. Therefore, each plate of the capacitor holds a charge of 0.05 mc.

Know more about capacitance here

https://brainly.com/question/28445252#

#SPJ11

The wall is losing heat to the surroundings at a rate of 146 W/m².

The convective heat flux to the wall can be calculated using Newton's Law of Cooling:

qconv = h x (Tw - T)

where Tw is the wall surface temperature and T is the ambient temperature. Substituting the given values, we get:

qconv = 40 W/(m²K) x (24°C - 15°C) = 360 W/m²

The radiative heat flux to the wall can be calculated using the Stefan-Boltzmann Law:

qrad = σ x a x (Tw⁴ - Tur⁴)

where σ is the Stefan-Boltzmann constant and a is the absorptivity of the wall surface. Substituting the given values, we get:

qrad = 5.67 x 10⁻⁸ W/(m²K⁴) x 0.8 x ((24°C + 273.15 K)⁴ - (80°C + 273.15 K)⁴) = -506 W/m²

The negative sign indicates that heat is being lost from the wall surface by radiation.

Therefore, the convective heat flux to the wall at x = 0 is 360 W/m² and the radiative heat flux to the wall is -506 W/m². The total heat flux to the wall at x = 0 can be found by summing the convective and radiative heat fluxes:

qtotal = qconv + qrad = 360 W/m² - 506 W/m² = -146 W/m²

To know more about Newton's Law of Cooling click on below link:

https://brainly.com/question/27104605#

#SPJ11

Here's an example of a MATLAB function file that takes in t as a vector, k as a scale, and eq as the equation number (1, 2, or 3) and returns the solution to the corresponding differential equation:

function y = solveDE(t, k, eq)

switch eq

   case 1 % y' = k*y

       y = exp(k*t);

   case 2 % y'' + k*y = 0

       y = cos(sqrt(k)*t);

   case 3 % y' + k*y^2 = 0

       y = 1./(k*t + 1./exp(k*t));

   otherwise % if eq is not 1, 2, or 3, return an error message

       error('Invalid equation number');

end

end

Here, the switch statement allows us to handle the different cases for each equation number. For example, if eq is 1, then the function returns y = exp(k*t) which is the solution to the differential equation y' = k*y. If eq is 2, then the function returns y = cos(sqrt(k)*t) which is the solution to the differential equation y'' + k*y = 0. And if eq is 3, then the function returns y = 1./(k*t + 1./exp(k*t)) which is the solution to the differential equation y' + k*y^2 = 0. If eq is not 1, 2, or 3, then the function returns an error message using the error function.

To know more about magnetic force  here

https://brainly.com/question/2279150

#SPJ4

a. The magnitude of the torque if the force is exerted perpendicular to the door is 40.32 Nm.

b. The magnitude of the torque if the force is exerted at a 60 degree angle to the face of the door is 34.85 Nm.

To calculate the magnitude of the torque, we will use the following formula: torque = force x distance x sin(angle). In your case, the force is 42 N and the distance is 0.96 m (since we need to convert cm to meters).

(a) For a force exerted perpendicular to the door (90 degrees), the torque can be calculated as follows:

torque = 42 N x 0.96 m x sin(90°)

= 42 N x 0.96 m x 1

= 40.32 Nm

(b) For a force exerted at a 60-degree angle to the face of the door, the torque can be calculated as follows:

torque = 42 N x 0.96 m x sin(60°)

= 42 N x 0.96 m x 0.87

≈ 34.85 Nm

So, the magnitudes of the torques are (a) 40.32 Nm when the force is exerted perpendicular to the door and (b) 34.85 Nm when the force is exerted at a 60-degree angle to the face of the door.

Learn more about magnitudes of the torques: https://brainly.com/question/31323759

#SPJ11

The rms current in the transmission lines for a generator producing 35 MW of power and sending it to town at an rms voltage of 71 kV is approximately 493 A.

The relationship between power (P), voltage (V), and current (I) in an AC circuit is given by the formula P = VI cos(θ), where θ is the phase angle between the voltage and current. In this case, we can assume that the power factor is close to unity (cos(θ) ≈ 1), which simplifies the equation to P = VI.

We are given that the generator produces 35 MW of power, which is equivalent to 35 x 10⁶ W. We are also given that the voltage in the transmission lines is 71 kV RMS (root-mean-square). To find the current, we can rearrange the equation to solve for I:

I = P/V

Substituting the values we know, we get:

I = (35 x 10⁶ W) / (71 kV RMS) = 492.96 A ≈ 493 A

Therefore, the rms current in the transmission lines is approximately 493 A.

learn more about power here:

https://brainly.com/question/14379882

#SPJ11

Body weight measurements, such as BMI (Body Mass Index), are often used to differentiate between overweight and overfat.

BMI is a measure of body fat based on height and weight, and is calculated by dividing an individual’s weight in kilograms by their height in meters squared. A BMI score of 25-29.9 is considered overweight, while a score of 30 or higher is considered obese.

Overweight individuals can be considered overfat if they have excess body fat, even if their BMI is below 30. Conversely, individuals who are not overweight according to their BMI can still be overfat if they have too much body fat.

This is why it is important to measure more than just BMI when determining if a person is overfat. Other measures, such as skinfold thickness, waist circumference, and bioelectrical impedance, can provide a more accurate assessment of body composition.

Know more about bioelectrical impedance here

https://brainly.com/question/31117131#

#SPJ11